Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Hey!

I currently have a RTX 3070ti with a 12th gen i5. MSFS works well enough. I do see a massive drop in performance in the typical areas, egll, kjfk etc.

I do unfortunately push the sliders to the right most of the times. I wanted to ask if moving from a 3070ti to a 4070 just for frame generation would make a huge difference?

Any thoughts?

Clinton Royston Fernandes.

Vabb-Mumbai India.

  • Administrators

You are now in the correct forum from your question!

Charlie Aron

AVSIM Board of Directors-ADMIN/Moderator-Registrar

Just going to run a Chromebook and not upgrade to a Windows computer. Too many problems with the new Sims! 😱
Trying to keep peace and harmony and the will of Landru on the site seems to be a full time job!

                          images (1) (1).jpeg

  • Author

1080p

32gb ram

1tb nvme

i5 12600

Clinton Royston Fernandes.

Vabb-Mumbai India.

FG doubles FPS, more or less. But half those frames are pseudo frames (guesses, artificially made with AI). So the improvement is less than 100% better. More like maybe 50% better. But that's still a lot!

It's been just a few days since moving from 3070 to 4070:  big improvement. DLSS 3 instead of DLSS 2. And FG.

I have panning outside view mapped to a hat. In other words the same command as panning outside view with right button on mouse. Only you don't have to drag the mouse, just hold the hat button down. Anyway, going to outside view and spinning the plane around in the view fast at Aerosoft Brussels EBBR is smooth as can be. It wasn't with the 3070.

5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB  PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.

 

BTW, all fps display apps I tried work properly with Frame Generation. Except the DEVMODE display of MSFS. That displays lies and does not tell the truth whenever FG is on. It does work and agree with all the other fps apps, but only if FG is off.

So if anyone is disappointed with fps not improving when using FG, just try another fps display app, like RTSS, Steam overlay, Microsoft gaming display. They will show the truth when FG  is on.

 

5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB  PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.

 

  • 3 weeks later...

I have a new computer with an Intel I 7 13900 CPU, and a Nvidia RTX 4080 GPU and 32 GB RAM. I use three 55’’ 4K tv as displays with the resolution set to 3840x2156 on all three tv. Before I tried to use FG I had 20-25 fps in Fs 2020 with AA TAA. With FG and DLSS the fps increased to 33-35 fps, but the cockpit displays are not as clear as before. If I change back to TAA, the fps drops to 15-20 fps. I have few ulta settings, but most high. Can anyone explain why I experience this?

On 9/30/2023 at 7:22 PM, adaniel said:

I have a new computer with an Intel I 7 13900 CPU, and a Nvidia RTX 4080 GPU and 32 GB RAM. I use three 55’’ 4K tv as displays with the resolution set to 3840x2156 on all three tv. Before I tried to use FG I had 20-25 fps in Fs 2020 with AA TAA. With FG and DLSS the fps increased to 33-35 fps, but the cockpit displays are not as clear as before. If I change back to TAA, the fps drops to 15-20 fps. I have few ulta settings, but most high. Can anyone explain why I experience this?

I think FG only works on one screen , well it does for me anyway, when i click off my main sim monitor onto my secondary monitor, which i use charts etc , the frame rate drops back to non FG and when i click back onto the main sim monitor you can clearly see FG kicking back in ! which is annoying ( a bit) for me but for you a nightmare i would imagine

ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS  2TB 980 Pro , MSFS  2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO  . Phanteks P600s Case ,TCL QM8B 50" 120 Hz  TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack)  Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons 

I just installed a 4090 today (was on a 3070ti) and have been messing around. Did a Fenix flight out of KJFK IniB and it didn't move from 80 fps. I am gobsmacked so far and it's only a few hours old. 

Regards,

Max    

(YSSY)

i7-12700K | Corsair Vengeance LPX 64GB 3600MHz DDR4 | Gigabyte RTX4090 24Gb | Gigabyte Z690 AORUS ELITE DDR4 | Corsair HX1200 PSU

 

On 9/13/2023 at 11:39 PM, Falconfly said:

Hey!

I currently have a RTX 3070ti with a 12th gen i5. MSFS works well enough. I do see a massive drop in performance in the typical areas, egll, kjfk etc.

I do unfortunately push the sliders to the right most of the times. I wanted to ask if moving from a 3070ti to a 4070 just for frame generation would make a huge difference?

Any thoughts?

FG will double your fps from what you have today and give you a performance boost as long you get minimum 30+ real fps, but if you are limited of main tread today you have to upgrade your CPU, and if you plan to upgrade your monitor to 4k or even 1440 UW, 12GB Vram won't be enough.

System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I

On 10/24/2023 at 3:43 AM, G-RFRY said:

Rumors of an RTX 4080ti with 20GB VRAM to be released 2023 Q4 have been around for some time. This doesn't seem to be happening - perhaps put off to next year and re branded as 4080 super.  These new Super branded GPUs are said to be released at current price points which would be very attractive if they include 20GB VRAM variants - seems unlikely but maybe.   Anyhow with recent price moves upwards of Nvidia GPUs in Australia with a collapsing exchange rate and probably other factors (plus 250 AUD in the past month at some retailers)  I decided to move now and get a 4090 while I still could at an acceptable price. 

Bruce

Bruce Bartlett

 

Frodo: "I wish none of this had happened." Gandalf: "So do all who live to see such times, but that is not for them to decide. All we have to decide is what to do with the time that is given to us."

12 hours ago, brucewtb said:

Rumors of an RTX 4080ti with 20GB VRAM to be released 2023 Q4 have been around for some time. This doesn't seem to be happening - perhaps put off to next year and re branded as 4080 super.  These new Super branded GPUs are said to be released at current price points which would be very attractive if they include 20GB VRAM variants - seems unlikely but maybe.   Anyhow with recent price moves upwards of Nvidia GPUs in Australia with a collapsing exchange rate and probably other factors (plus 250 AUD in the past month at some retailers)  I decided to move now and get a 4090 while I still could at an acceptable price. 

Bruce

We'll have wait and see but they may want something new on the shelves for Christmas sales.

Edited by G-RFRY

 

Raymond Fry.

PMDG_Banner_747_Enthusiast.jpg

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.