Change Log (1.0.38):

➕ ADDED – Simbrief import and integration for P3D
➕ ADDED – Physical throttle position display
➕ ADDED – SayIntentions support
➕ ADDED – More robust baro sync options
➕ ADDED – Minimums sync option
➕ ADDED – Scroll wheel acceleration option
➕ ADDED – DSPY light behavior
➕ ADDED – ECON OFF alert
➕ ADDED – DFDR OFF alert
🔧 FIXED – MSFS EFB showing ICAO length showing instead of ICAO
🔧 FIXED – Analog standby altimeter not rolling properly
🔧 FIXED – FMA overlap under SINGLE LAND conditions
🔧 FIXED – Temperatures not starting at appropriate defaults
🔧 FIXED – ISOL valve button light not reflecting status
🔧 FIXED – Engine bleed pressure and temp when engines are off
🔧 FIXED – ND occasionally drawing invalid distances
🔧 FIXED – Nose gear light incorrectly reading from right gear
🔧 FIXED – Invalid default anti-ice setting
🔧 FIXED – Altitude alert behavior
🔧 FIXED – Ability to start/operate APU outside of acceptable envelopes
🔧 FIXED – Manual ILS tuning selecting wrong course under certain conditions
🔧 FIXED – CAWS alerts inhibiting too early during approach
🔧 FIXED – Incorrect altitude alert exclusion logic
🔧 FIXED – Engine ignition A/B not selectable together
🔧 FIXED – ABS DISARM light not appearing when arming for landing
🔧 FIXED – Landing altitude box not appearing properly with no value entered
🔧 FIXED – Duct/zone temps not properly initializing
🔧 FIXED – LOC ONLY behavior
🔧 FIXED – Incorrect ETE to T/C or S/C on PERF page
🔧 FIXED – Default engine bleed temperature
🔧 FIXED – ILS lazy tracking behavior
🔧 FIXED – Localizer tracking wrong direction
🔧 FIXED – ILS intercepting without full configuration
🔧 FIXED – Rough autoland
🔧 FIXED – Poor autoland flare and rollout behavior
🔧 FIXED – Ignition bolt not appearing with anti ice on
🔧 FIXED – SID and STAR page missing arrows
🔧 FIXED – FMS DONE phase not triggering properly
🔧 FIXED – Erroneous IRS light flashing
🔧 FIXED – Intermittent OPT/MAX altitude value dropouts
🔧 FIXED – Various ILS capture issues
🔧 FIXED – Scroll acceleration not working properly
🔧 FIXED – Stabilizer trim moving without hydraulic power
🔧 FIXED – Overlapping analog and digital standby
🔧 FIXED – ECON speeds dropping out
🔧 FIXED – Navigraph session/login not being saved
🔧 FIXED – FMA indicating autoland with AFS off
🔧 FIXED – 250kt/10k limit not being applied at cruise below 10,000
🔧 FIXED – Ability to restart engines outside of acceptable envelopes
✏️ CHANGED – Improved startup sound
✏️ CHANGED – Improved GE sounds
✏️ CHANGED – Removed altitude alert exclusion type
✏️ CHANGED – Reduced volume of fuel ignition on startup (MSFS)
✏️ CHANGED – Slight improvements to exterior sound mix (MSFS)
✏️ CHANGED – Slightly reduced cockpit engine volume (MSFS)
✏️ CHANGED – Refined interior engine sound mix (MSFS)
✏️ CHANGED – Improved GE whine sound

So unless it has msfs in parentheses, these fixes apply to the P3d version? 

Still no option to hide the yoke?

38 minutes ago, DavidP said:

Still no option to hide the yoke?

Yeah so much done and this is still not there. Also SO much time after release and it's only 50% out, there's no Pratt & Whitney model out there.

7 hours ago, okupton said:

So unless it has msfs in parentheses, these fixes apply to the P3d version? 

I clicked the installer, saw a patch as well as a new installer, et voila.

Went to find the patch notes and that's what I found. I assume what you observed to be correct.

FADEC still fights a lot during an ILS approach, i guess they didn't touch that at all. Annoying to say the least. The sounds are indeed a bit better, but there are samples which are poorly cut and sound annoying as they are noticeably badly produced.

Come on TFDi, put some more effort in this bird, it deserves it!

At least the Simbrief integration has finally arrived.

There's still a bunch of fixes for other things still outstanding, but I can survive. So far I have done a max flight of around 5.5 hrs without any issues minus the update that has just arrived but have not installed yet.

I hope at some stage they will be able to sort the VRAM issues out (does not affect me so much with a 12Gb graphics card installed) and some of the FMS issues (ALT Fuel not working).

3 hours ago, Nuno Pinto said:

Yeah so much done and this is still not there. Also SO much time after release and it's only 50% out, there's no Pratt & Whitney model out there.

You're wrong there is a PW cargo and Pax at least for MSFS, I uninstall the P3D for their infamous CTD which seems to be a "Franchise" for TFDI planes!

 

21 minutes ago, Pat Mussotte said:

You're wrong there is a PW cargo and Pax at least for MSFS, I uninstall the P3D for their infamous CTD which seems to be a "Franchise" for TFDI planes!

 

The folders are there, the plane is not. Only for whoever purchased the pre-pre-release or whatever it was called. Regular users have the GE and that's it.

2 hours ago, Pat Mussotte said:

I uninstall the P3D for their infamous CTD which seems to be a "Franchise" for TFDI planes!

This CTD is due to VRAM exhaustion, right? If so, try removing/renaming PDK2D2D.dll in the panel folders. TFDi suggested this in a ticket I opened because of an unrelated issue I had (displays blanked out when using SGSS), but I found out it also reduced VRAM usage considerably. Now I'm having a lot of fun with the MD-11. I still don't know what did I lose by removing this DLL.

As always, backup first. YMMV.

Edited January 23, 20251 yr by Luis Hernandez

1 hour ago, Luis Hernandez said:

This CTD is due to VRAM exhaustion, right? If so, try removing/renaming PDK2D2D.dll in the panel folders.  I still don't know what did I lose by removing this DLL.

 

That file is apparently used in the render process of the gauges - likely to be DirectX related. Is there any change in quality/appearance of the gauges you noticed by removing this file?

This file was also used in the TFDi 717.

3 hours ago, 787flyer said:

Is there any change in quality/appearance of the gauges you noticed by removing this file?

Nothing that I can notice.

7 hours ago, Nuno Pinto said:

The folders are there, the plane is not. Only for whoever purchased the pre-pre-release or whatever it was called. Regular users have the GE and that's it.

Yes I'm a pre release customer, too bad everybody can't get the PW!

Hi,

 

So I have tried out the new Simbrief integration, and it loads the waypoints but based on a couple of tries it did not appear to load in the Alternate destination, the Cost Index, Cruise Altitudes and the flight number from Simbrief.

Waypoints were inserted.

Can anyone else confirm this behavior?

 

Thx!

Post deleted by OP. MSFS topic in P3d forum by mistake.

Edited February 4, 20251 yr by btacon