Headley

One way is to "activate" them via one or other button, let's say pressing [Ctrl] on the keyboard or another action... Without [Ctrl] (or whatever) no hot corners🤔

👍 Thanks ...

Have 5.04 But unable to find the options mentioned above... Must be me 😕

You have to add fuel from Res 1 to Main 1 and Res 4 to Main 4 😉

Ray, I have disabled/deleted "almost" all my default assignments in P3D (so almost impossible to have conflicts between programs) , and use only the very basic commands, like Ctrl+P for Pause and Ctrl+Y for slew mode, B for altimeter reset and H for heading reset. All the rest is done via the MCP and/or via hardware (i'm using HOTAS from Thrusmaster, a lot of buttons and knobs, all assigned via LINDA and an MCP-system from VRInsight). As of Chase Plane: i have coupled a PS4 controller to my system (also a lot of buttons and knobs) and with that controller i solely control Chase Plane. I ony use my keyboard for entering text, and for controlling when in slew-mode (numeric keyboard only). So the arrow-key's are not used in my setup. Worth mentioning that i don't fly default aircraft, only the PMDG's and 1 or 2 GA-aircraft from A2A, witch are also fairly "complete" and don't need keyboard-commands... And of course the mouse 🙂

Well then definitely something was assigned to that arrow key, along with a command for CP. You really have to make sure there are no conflicting assignments between CP and the sim ...

No problem here... When selecting [Airport] and turning the range <5, you get the airport display on the ND. 1 click on [airport] disables the airport layout, a second click disables the surrounding airports and removes the notification [ARPT] on the ND. Hope i explain it well😀

I think this is ironically meant😎

And when hitting the upper most part of the Left Washer switch between the top of the switch and the word Washer, you activate the "Fuel Xfer Reserve 1 & 4" switch on the upper richt part of the overhead...

Flight planning screen => Aircraft tab => Cruise/Cost index window: type in what you want or need ...

You can simulate for a few seconds daylight time and revert back to night modus when battery switch is on😉

https://flightsimapps.com/remote-server Pricing & Purchasing Details

Well, the simplest way is to save a panel state with ground power available and Batt Switch ON😀 A bit more complicated but with a lot of benefits is LINDA with the use of the B737-module. It's a free application, once installed i gives you the possibility to assign a button or switch (or even a key combo, but NOT an axis) to (almost) any virtual button in the NGX, including the Batt Switch. You have to read yourself through a bit of limited manuals, but installation i simple (no complicated exe's) and support is very good. Maybe there are even simpler solutions for your problem but this is what i use.

Look in this post😉.

I see the same effect when flying online (Ivao). No AI-traffic for me, but the labels of the online traffic near me are visible through the panel. Not the plane itself, only the labels... I have always seen this, thought it was normal behaviour. Oh btw, not yet updated to the latest version. Same is for the B737NGX.

Not a real 747-driver, but i can confirm this behaviour on my side...

Dan, Thanks. That was where is was afraid for. But the pushback feature of GSX is so nice ... 😀

Hmm, not that way🤨 If you kill Couatl via taskmanager you no longer have the entry's "Couatl Settings", "Couatl Live Update" and "GSX". Only "Addon Manager..." but no way to restart Couatl from there ...

Since I'm one of the lucky ones who is allowed to experience that specific "Greenland-crash", I have killed Couatl, i assume you do that via task manager, since there is no other option? But how can I start Couatl once again at the destination, to still enjoy some GSX facilities? Simply starting Couatl.exe (even as an administrator) will not do the trick😕

Thanks, will keep that in mind for the next update ...

Hello, When installing a new NVidia videoa driver, it asks me to install also 3D Vision controller driver, stereoscopic 3D driver, along with HD Audio driver. Do i need these 😀 ? I do not install the experience thing...

OK, thank you Dan I'm not really interested in creating projects, but only want ADE to adapt or do small mod's to an airport if needed. Thanks again👍

Any solution for this? I have +/- the same behaviour; I'm not using the boarding features, but while deboarding no door wil be opened, i have to do it manually... This is for PMDG B747, on the PMDG B737 all works fine!

I plan to install the SDK in order to work with ADE. I still use P3Dv4.3, but I just today downloaded the latest version of SDK. That does not pose a problem as P3D v4.4 is released. There is no other version of SDK interfering with olders versions of P3D? Furthermore, is there anything special that I have to pay attention to when I install SDK? Certain folders? Thanks,

Did you by any chance assigned an axis for slew? Because when modifiing GSX you are in slew-mode! If you axis are spiking or null-tolerantion is to small, you can get movements in slew-mode