Petr Bily

See this thread: http://forum.avsim.net/topic/343424-speed-bug-v2-20-error/ Petr

Hi, if you sent me your payload, number of passangers, metar, airport, runway, I can put it in my topcat and send you correct speeds. We can then compare if you have the same (plus minus) Petr Sent from my BlackBerry 9900 using Tapatalk

That is strange. Just try it with some simple name like "P" for example. Petr

Yes, you are right. But when you want to save the status of the plane, just shut it down. Hold button menu on CDU what will start FMS. Somewhere in FS menu is a possibility to load and save. You can also set what saved file should be loaded when you start PMDG737NGX. So I put there file called "last" and every time when I finish the flight I save it as "last" Petr

Start to fly VATSIM. You will have real ATC and you will not hear such nonsenses. Petr

Is not active the side with primary FD ? Petr

Good question will be also is there any good extension pack for the sound or PMDG is the best?

Hi Thomas, I fly only VATSIM so I get wind which can be 30 minutes delayed. Like in the real life. So put there information from ATIS because we want to fly like in reality. If you fly VATSIM you get wind info from ATC together with take off clearance. Petr

I understand. In fact in real wake turbulence you can loose your plane easily. That is why there are some minutes delay between t/o of havier plane in fromnt of you. But you are right that if FSX makes this from standing plane or from landing also it is nosence and switch it off. Nice landing ;-) Petr

Could be... Was your Vapp speed Vref + 5, better +10? Petr

Dear Gianluca, in your case I would not focus what it was (crosswind, wake turb, etc...) I will focus how it is possible that you landed out of the RWY! Do not turn it off and practise it more times. You should go arround immediately in such case. Petr

After next 5 hours I found the problem.When I use Track IR (version 5) and I want to extend flaps (F7) just one click does not work. When I hold F7 for a longer period (1sec for example) flaps are extended. It was strange to me but I was able to extend the flaps, so I did not care. But exactly in this time PTT button and also numbers from EZDock camera stopped to work. How did I solved it? I use other button to extend the flaps.Petr

Dears, I spent already hours and hours to solve my problem and I have no more ideas what to do. I have FSX, flying PMDG 737NGX connected to VATSIM, using FSINN. I also have ezdock camera and Track IR installed. When I start FSX, connect to VATSIM, everything works. I can transmit, I hear the beep when I click PTT and I hear beep, when I release the PTT also. Mostly when I start to move my plane on the ground, sometimes during taxi, sometines after airborne my PTT stops to work. I just do not hear the beep and ATC does not hear me :-( I tried to restart FSFDT during flight, it did not help. Only restarting FSX helps :-(If you have any idea how to solve my problem I will be happiest man on the world.Thank youPetr

Hello Jude,I will try it during weekend and send you some screenshots.Petr

Thank you Andrea. Sounds clear to me now.

Hi Guys, if you would read posts from PMDG you will know that SDK will be available after NGX will be finished completely.Best regards

Hi Bjorn,is not it like nengine test? 30%N2 should increase N2 and EGT?Petr

That is correct answer Jeff... I feel it the same way.

Thank you Craig,I will try it because my FPS is about 11 :-(I have i7 + GeForce 580... Not bad computer but seems very bad settings.Petr

Thank you, I have registered FSUIPC.Petr

Hi, can you please advise how to see my landing rate?Petr

It took me 4 hours :-) You are right. This helps. Thank you a lot. Seems it is some bug because you do not have to press EXEC on real B737Petr

Hi Chris, I have the same problem. I found out that the problem is that new graphics card does not meet the requirements. The question is why the FSX check this worse card even it is a second in the system (boot goes on the first card) When I disable it in driver windows, start FSX and enable, it works and I can use it.... But as you can see it is not very comfortable. If you have any other solution, please let me know. Petr

Dear Henk,it works perfectly. Thank you very much. I love this CDU II.I am just fighting with FSCrew Voice :-) But it is on another thread.Per

Dears, I think I did it.For those who will have the same problem...1) Install FS2Crew and set FS2Crew panel.cfg2) Install SerialFP2Go to the folder: C:\Program Files\SerialFP2\Aircraft\CDU2\PMDG_B744\FSX\PanelOpen file panel.cfg and put there this (rewrite all what is there)[Window Titles]Window06=CDU-II // zorder 10 VRinsight's CDU-IIWindow30=CDU Display // CDU Panel window for CDU-IIWindow31=CDU Keypad // CDU Panel window for CDU-II[Window06]//---------------------------------------------------------// PMDG_CDU_PANEL for VRinsight's CDU-II//---------------------------------------------------------file=747.CDU.bmpfile_1024=747.CDU.bmpsize_mm=385, 542position=8visible=0ident=25zorder=10window_pos= 0.000, 0.000//gauge00=PMDG_747400_Main!CDU, 0,0,385,542,L[Window30]//---------------------------------------------------------// PMDG_CDU_PANEL (Display for CDU-II)//---------------------------------------------------------file=747.CDU.bmpfile_1024=747.CDU.bmpsize_mm=400,350position=7visible=1ident=25zorder=10gauge00=PMDG_747400_Main!CDU, -55,-35,510,880,L[Window31]//---------------------------------------------------------// PMDG_CDU_PANEL (Keypad for CDU-II)//---------------------------------------------------------size_mm=400,542position=8visible=1ident=25zorder=10gauge00=PMDG_747400_Main!CDU, 0,0,400,542,L//---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Safe the file.Go to the folder C:\Program Files\SerialFP2\Aircraft\CDU2\PMDG_B744\FSX\panel.vcOpen file panel.cfgPaste there this (rewrite all what is there)[Window Titles]Window06=CDU-II // zorder 10 VRinsight's CDU-IIWindow30=CDU Display // CDU Panel window for CDU-IIWindow31=CDU Keypad // CDU Panel window for CDU-II[Window06]//---------------------------------------------------------// PMDG_CDU_PANEL for VRinsight's CDU-II//---------------------------------------------------------file=747.CDU.bmpfile_1024=747.CDU.bmpsize_mm=385, 542position=8visible=0ident=25zorder=10window_pos= 0.000, 0.000//gauge00=PMDG_747400_Main!CDU, 0,0,385,542,L[Window30]//---------------------------------------------------------// PMDG_CDU_PANEL (Display for CDU-II)//---------------------------------------------------------file=747.CDU.bmpfile_1024=747.CDU.bmpsize_mm=400,350position=7visible=1ident=25zorder=10gauge00=PMDG_747400_Main!CDU, -55,-35,510,880,L[Window31]//---------------------------------------------------------// PMDG_CDU_PANEL (Keypad for CDU-II)//---------------------------------------------------------size_mm=400,542position=8visible=1ident=25zorder=10gauge00=PMDG_747400_Main!CDU, 0,0,400,542,L//----------------------------------------------------------------------------------------------------------------------------------------------------------------------------Save the file and start SerialFP2 Panel Installer. Install PMDG 747 for FSX.Start FSX and if it helps you send me a mail ;-)Best regardsPetr