Mikeingreen

Thanks Turbo for posting this. It helped with my decision on switching to an nVidia 4080 instead of waiting on an AND 7900XTX.

I finally made my purchase decision and went with nVidia this time. The heat problems with the 7900 XTX and being able to DLSS 3.0 by going to nVidia, plus the 4080 having much better VR performance than AMD cards made my decision for me. I might now maybe will try out my G2's in MSFS. I found an nVidia Titanium and Black 4080 at Bestbuy for $1199.00 so I am not going to complain about the cost either. It will be at my local BB store on Sunday. The 4080 should pair nicely with my 5800x3D.

Did we ever decide IF rhe extra vram of the 7900 XTX is worth it over the 4080 in MSFS? I have been patiently waitingand checking supplies and still can't find a 7900XTX. I can get my hands on a 4080 though. I am not interested in an AMD vs nVidia debate as I have used both and had good luck with both

I think this is what I rasn into on the last try as the next leg was the start of the Approach into KESS. I didn't have LNM installed yesterday to try to come up with my own Vector so I just exited out and flew something else. I have since installed LNM to help when needed.

I tried doing that but it gave me an error. I will get back to again this afternoon. I flew this aircraft some in the early days of MSFS and then kind of got away from it since back then my H/C Bravo was basically useless with it. I am now trying it out again but finding a few stones in the path to stumble over as I go.

Yes Ryan, that's what I meant. Not enough coffe this morning yet. I will go back later today and see if I can figure out what you are saying to do. Do you mean to click the button next to the Next waypoint and the click the button next to the error? I thin I tried doing that and got an error. I also tried to manually type the next fix in keyboard and then click the button next to the error.

Since the latest Beta I have wanted to get back to flying the CJ4. BUT, I am having issues with the FMS and can't figure out what I am missing. I have tried using the World Map and manually entering flight plans but both end up with Incontinuities, and then I cannot get rid of said Incontinuities. I have watched a couple of Youtube videos about the FMS but what they suggest doesn't seem to work on this version for some reason. I have also found that while trying to follow Jaydee's WT CJ 4 checklist FMS options differ from what is now available. Is there a newer Tutoral video since the latest CJ4 release?

I forgot to add that is running with FSR 2. Before they enabled that I was using FSR 1 at the driver level with basically the same results. I do admit I don't fly Tubes into big cities so that may contribute to my FPS.

I was checking on availability this morning and the scaplers cleaned out Newegg and Bestbuy as soon as they hit. In a way I am kind of glad they did. Right now with a 5800x3d and a 6800 XT I can run all Ultra 200/200 at 50% of my monitors refresh rate, 167, so get just over 80 fps in "most" places, in 2K, 2560x1440. That is my monitors max resolution. My mind tells me that the 7900 XTX is a waste of money for my system, but I stll kind of want one.

While not having Navigraph Maps in-game is not optimal, they are still just an Alt-Tab away. But not beiing able to transfer flightplans from the world map is a much worse problem IMO.

I guess I will stand corrected as I can't seem to find the site now. I am glad that is Gen 4 as I would rather have the 7900 anywy.

If you read the Specs, they say Gen 5. I could have used my 6800XT with my old Gen2 board but it wouldn't get the full performace from it. I figure the same using a Gen 5 card in a Gen 4 m/b.

I was going to wait for the AMD card until I found out I would need to replace my motherboard and probably ram as well for it. The 7900XTX will require pci-e ver 5 nd my current board only has ver 4. The 4080 works with ver 4. That said I am having a hard time pulling the trigger on the 4080, there is one In-Stock 2.5 hours away. My current system (5800 x3D, 6800 XT) runs MSFS in Ultra almost always at 82fps, 50% refresh rate @ 164mhz at 2560x1440 res, my monitors max. I keep thinking that's alot of $$$ for something I might not even see any difference with.

I am currently doing an ATW series of flights using the TBM and the WT3000. Today's flight was 970km, yesterdays was 907km, and Tueday was over 500km. I haven't had any issues at all.

Yes, they added the Presets for Heli's to all the major "stick" controllers.

I have the Airbus 320 stick from Thrustmaster and figured it can't be too hard, right. Changed the settings to Helicopter in Options and tried the G2 training. Boy, was I ever wrong. I can go up and down just fine. But if I twist the stick I spin and I cannot figure out how to go forward at all. I am also going to have to lower the Sensitivity a bunch.

Working fine here with a 6800XT, all Ultra 200/200 @ 2560x1440.

OK, here are my thoughts so far. I flew the Beaver a bit and it was fun. I then did a short flight in the TBM and all was fine with that too. Now my comment on performance. I had been using AMD's Super Resolution (driver level) before this update, setting the sim res to 1920x1080 which the AMD driver upscaled to 2560x1440, with monitor set to 164mhz and sim set to 50%. That always gave me a solid 82fps with settings on Ultra with LODS at 200. Everything was great as far as I was concerned. After the update I turned off Super Res and went with the FSR 2.0 and brought the sim res back up to 2560x1440, monitor and all other options the same. Framerates have fallen as far as into the high 40's now at the lowest but back to 82 fps depending on what was going on. I think the average was in high 60's for the flight, which is just fine. I never had any stuttering and the overall picture is better with much more depth than before. Mikey Likes It.

I am going to get in the Beaver and take off from Makatea in a rain storm headed towards Tahiti, and hope I make it.

FYI, you have to go to the Marketplace to download the A310 and the DC-3. They were the only 2 I saw.

That's what mine shows, wasn't on Beta. Now on to 1.16 GB in Content Manager

I was seeing this too. A reboot of my PC fixed it though and downloading now at 175 Mb/s

I was offered 22h2 a couple of weeks ago and tried to do the update but for some reason it Failed on me, That was a firdt for me on an update.I then went out of town for a few days and I have been waiting for it to show up again but so far nothing. I do not want to go through a reinstall of Win11 to get it but would like to get it again through Windows Update, but can't find a way to get it to trigger again. Any ideas?

Well, I can see that the 1st thing I am going to do when I get back home is opt out of this round BEFORE starting up MSFS.

FSR is the AMD version of DLSS. You will not see it with your nVidia card. I left home yesterday on a visit to Seattle and will not get back home until next Tuesday night. I hope you guys have found all the bugs and asobo has released an update by then. I cant wait to try FSR 2. I have been using FSR 1 with great results since they enabled it a few months ago.