Jump to content

Archived

This topic is now archived and is closed to further replies.

Nyxx

J41 CTD and fatal Error

Recommended Posts

HiHaving trouble with the J41.Install, Installed livery's, Activated on-line no problems. Loaded up to just look, All the gauges are showing and i clicked on the FMS and turned it on, again no problems and exited flight as it was 5AM, but as i did so fsx= "Fatal Error"Loaded up fsx ran a normal AC took off and no problems.Tyred loading the tutorial J41 "save"(from you) and CTD.The one strange thing is in the aircraft page, if I preview the J41 the rudder and ailerons are all fully deflected.????I use Vista 64 with all user admin turned off from the day i got vista 64 never had any problems with your MD 11 or any other payware AC.I hope you can help? I stayed up just about all night to get the J41 and this happening with a PMDG produced was the last thing I expected.I hope you can help asap.All the bestDavid Murden. UK

Share this post


Link to post
HiHaving trouble with the J41.Install, Installed livery's, Activated on-line no problems. Loaded up to just look, All the gauges are showing and i clicked on the FMS and turned it on, again no problems and exited flight as it was 5AM, but as i did so fsx= "Fatal Error"Loaded up fsx ran a normal AC took off and no problems.Tyred loading the tutorial J41 "save"(from you) and CTD.The one strange thing is in the aircraft page, if I preview the J41 the rudder and ailerons are all fully deflected.????I use Vista 64 with all user admin turned off from the day i got vista 64 never had any problems with your MD 11 or any other payware AC.I hope you can help? I stayed up just about all night to get the J41 and this happening with a PMDG produced was the last thing I expected.I hope you can help asap.All the bestDavid Murden. UK
Check the forums in a sticky perhaps. This was mentioned already. Sorry I can't be more specific because I don't run Vista I just glanced at it, but this has been covered.

Share this post


Link to post

Thanks Spaceman3 but thats topic is Windows 7 but seems it could be related. The one time it did load the gauges where not blank. I am so gutted, just hope PMDG can help.

Share this post


Link to post

Mine CTD's FSX everytime I exit!! Otherwise runs like a charm. right seat gauges turned down and fps is in the 20's. Very pleased!! No I need to go read that tutorial :D FRED

Share this post


Link to post
Mine CTD's FSX everytime I exit!! FRED
Glad its not just me and your happy with that?

Share this post


Link to post

I'm getting crashes to desktop every now and again just doing simple things like reloading the aircraft, I'm not happy with the aircraft to be honest especially when you cant control things like the heading and altitude bugs with key presses on a keyboard, I know this sounds crazy but I've put in a refund request already, I've not had one single crash in FSX for several months and I have many hours logged in many aircraft over that time too. This morning I've had 5 or more crashes already and I've had enough, the MD11 works perfectly on my system so I know its not my kit, so refund request it is then, I cant afford to throw money away at the moment and I'm certainly not paying to beta test this aircraft, sorry. Maybe I'll buy it again in the future when its been finished properly.

Share this post


Link to post

Andy I to have no problems with fsx or any AC add-on and i have a lot. I am gutted i have CTD/fatal errors never thought this from PMDG and like you my MD 11 runs like a dream.I will wait for a good reply from PMDG Fingers crossed its a none bug????

Share this post


Link to post

Hi,Running FSX in Vista 64-bit here - no probs.What add-ons do you have installed? I found a conflict between the LeonardoSH.dll module and the MD-11 autopilot (would result in a CTD when I pressed a key combination to disconnect the autopilot in the MD-11). Might be something funky like that.Best regards,Robin.

Share this post


Link to post

I'm using Vista 64 too and the only add-on aircraft I have installed at the moment on this PC are the MD-11, RealAir Duke and Lotus sim L-39. My main reason for wanting a refund though is the lack of key commanding for basic autopilot control, which I was lead to believe were available from reading posts made by beta testers.

Share this post


Link to post
Hi,Running FSX in Vista 64-bit here - no probs.What add-ons do you have installed? I found a conflict between the LeonardoSH.dll module and the MD-11 autopilot (would result in a CTD when I pressed a key combination to disconnect the autopilot in the MD-11). Might be something funky like that.Best regards,Robin.
My fsx has not crashed once in months and I use MD 11, Dodo Helli was last add-on and like all other NP. There is no Q the J41 is crashing the second i tyred loading the tutorial flight it CTD no other save has ever done that. But thx for the thought.

Share this post


Link to post

Can you guys with the CTDs try rebuilding your FSX.cfg file? Just rename it to FSX.cfg.bak or something like that and then run the sim, it'll create a new one.There definitely is not any inherent CTD issue with this aircraft, we'd have seen it in testing, which was extremely extensive over the past few weeks. No one saw anything of the sort. It's gotta be a localized issue on your machine somehow...

Share this post


Link to post

So why do no other aircraft suffer the issue? I will test it and make a back up of my original file, but it still doesn't explain why you didn't bother to tie up a basic dependencies between the autopilot bug adjustments and the default keyboard short cuts, even Carenado do this and they are not that good of a developer anymore in my opinion, come on please you guys are supposed to set an example.If you are using a custom autopilot again then you should have supplied a keyboard setup interface again like the MD11, its useless to me at the moment, I've got thousands invested in hardware that I cant use.

Share this post


Link to post
Glad its not just me and your happy with that?
I'm getting it as well. Also, when I reload the aircraft, I get this one almost every time. (Win7 64 RC) ---Problem signature: Problem Event Name: BEX Application Name: fsx.exe Application Version: 10.0.61637.0 Application Timestamp: 46fadb14 Fault Module Name: MSVCR80.dll Fault Module Version: 8.0.50727.4918 Fault Module Timestamp: 49d43de9 Exception Offset: 00008aa0 Exception Code: c000000d Exception Data: 00000000 OS Version: 6.1.7100.2.0.0.256.1 Locale ID: 1033 Additional Information 1: ab55 Additional Information 2: ab553ee1c6d15f31be416ab01bbcee7a Additional Information 3: 33a5 Additional Information 4: 33a5c8a58fe6bf7aa1a44192e4c60b72Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104...mp;clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt

Share this post


Link to post
Can you guys with the CTDs try rebuilding your FSX.cfg file? Just rename it to FSX.cfg.bak or something like that and then run the sim, it'll create a new one.There definitely is not any inherent CTD issue with this aircraft, we'd have seen it in testing, which was extremely extensive over the past few weeks. No one saw anything of the sort. It's gotta be a localized issue on your machine somehow...
Thx you for your reply and i will try that when i get home from work and hope it works.But I want to be very clear I have not had any problems of anything like this untill i loaded the J4100 started fsx 2 time to look/enjoy your amazing new AC and you see the result.

Share this post


Link to post

Andy, just so you know, we're talking about adding custom keyboard/control mapping in the first update - no promises yet, but it should be doable.

Share this post


Link to post

Thank God for that Ryan, fingers crossed you can do it, maybe I'll hold off on the refund then, I've not had a reply yet though other than the auto reply. Just to be clear I think most of my crashes were after reloading the plane after turning my engines to shiny pools of metal, I've not done it for a while yet, I'm running through the tute.

Share this post


Link to post
Thank God for that Ryan, fingers crossed you can do it, maybe I'll hold off on the refund then, I've not had a reply yet though other than the auto reply. Just to be clear I think most of my crashes were after reloading the plane after turning my engines to shiny pools of metal, I've not done it for a while yet, I'm running through the tute.
One of the ways I reset the flight during testing was to load from the free flight menu and then just use the reset flight option. Have you tried this?

Share this post


Link to post

Hi George, I use the failures reset trick now and that doesn't crash it so it shouldn't be a problem anymore for me, thanks anyway. Some of the other peoples crashes in here seem a lot more serious and may be fixed by the fsx.cfg deletion as mentioned earlier by Ryan.

Share this post


Link to post

I try a new fsx config.The J4100 is still not working the rudder and ailerons are full deflection even in the view before flight. post-101009-1251917955.jpgI try loading the MS 172 before even looking at the J4100.Tried loading the tutorial save and as it started to load fsx CTD.Error wasProblem signatureProblem Event Name: APPCRASHApplication Name: fsx.exeApplication Version: 10.0.61637.0Application Timestamp: 46fadb14Fault Module Name: PMDG_BAe_JS4100_3.DLLFault Module Version: 0.0.0.0Fault Module Timestamp: 4aa0604cException Code: c0000005Exception Offset: 00050dc7OS Version: 6.0.6002.2.2.0.768.3Locale ID: 2057Extra information about the problemLCID: 2057Bucket ID: 1447169416So where can we go from here?Look forward to your help in making this work.ThanksDavid Murden

Share this post


Link to post

Ive just done a un-install/ install reboot etc and just the same.

Share this post


Link to post
Mine CTD's FSX everytime I exit!! Otherwise runs like a charm. right seat gauges turned down and fps is in the 20's. Very pleased!! No I need to go read that tutorial :D FRED
Same here Fred but I'm not going to worry about it yet as my pc is awaiting a new O/S and then I'll have enough worries lolAgree with the rtfm too, but being me... if all else fails read the manual lolJohn Ellison

Share this post


Link to post

Yeah mine is acting up a bit, only managed one flight so far and destroyed about 20 engines.FSX will CTD whenever I try to exit, MD11 is flawless on my machine and I dont think I have ever had a CTD on FSX till now on my new HD. I also am pretty sure I have a bug of sorts when it comes to starting the engines. I know I may be wrong but I have read the OP guide, the Tutorial and seen and tried to copy the pinned video of start up but the engines never get past spooling up, no torque or much fuel flow.I also notice the engine shut down sound file being played after I exit a flight just before a CTD?Wierd? nice to fly though the one time I actually got it off the ramp.Any thoughts welcomeDan.

Share this post


Link to post

I didn't read through the whole thread so I don't know if it was mentioned already but if you are experiencing CTD's try loading a default plane first in the Free Flight window and THEN load the J41.Just a little tip.

Share this post


Link to post
×
×
  • Create New...