August 12, 201114 yr As I said in my post I already tried to map a key to the AT toggle and toga mode in the FMC, but still no luck unfortunately. Strange actually. Mike:Sounds like a good idea. Just gonna fire up FSX first, and I'll be back with a pic :)You can try mapping à key or button not in THE FMC, but via fsx ( options). That works for me.regardsEric Eric van Dorp
August 12, 201114 yr Im puzzled, in relation to the AT problem, I don't find anything wrong with the setup. I noticed some other matters though (these are not related to the AT): 1. LNAV/VNAV not engaged2. Altimeter setting 29.92 in (should be set to local as per ATIS)3. No VOR radios setup in ND Roy Joven T. Benzonan AS136 - AirSource Virtual Pilot Union Acer Aspire 5738G, Intel Core 2 Duo (2.2Ghz), 4GB RAM, ATI Mobility Radeon (512MB graphics), Windows 7 (64-bit) Add-ons: Radar Contact V4, Activesky Evolution, FDC Live Cockpit Flight Planning: FSBuild2, Navigraph nDAC3 Aircrafts: PMDG NGX/747-8i, LDS 767, CS C130
August 12, 201114 yr Try the hidden click spot right below the "Course" selector nob instead of trying to assign a key. Seems to always work for me. Dylan Charles "The aircraft G-limits are only there in case there is another flight by that particular airplane. If subsequent flights do not appear likely, there are no G-limits."
August 12, 201114 yr This is my cockpit just before i press the TO/GA hidden click spot as mentioned above. It works for me fine. See if this matches what your cockpit is like.Uploaded with ImageShack.us Anthony Jones Intel Core i5 750 2.66GHz 8MB L3 Cache Overclocked to 3.8GHz Gigabyte GA-P55A-UD5 P55 Gigabyte HD 5870 1GB GDDR5 Antec Nine Hundred Antec TruePower 750W Modular PSU Noctua NH-U12P SE2 Western Digital 1TB Hard Drive SATAII 7200rpm G-Skill 4GB (2x2GB) DDR3 1600MHz/PC3-12800 Ripjaw Memory Kit CL7(7-8-7-24) 1.65V Microsoft Windows 7 Home Premium 64-bit, REX, Radar Contact Saitek X65F Joystick and Throttle Saitek Rudder Pedals Track ir 5 with pro clip Zero Flight Experiance New to Flight Sims
August 12, 201114 yr Hi all thank you very much it 's ok for me It's the second F/D in F/O I dont activated this thanks all guy Plançon nicolas FSX win 7 x64 home : troyes
August 12, 201114 yr Commercial Member Anthony,Your fuel configuration is very wrong there - you never load the center tank first, always the wings full first and only then the center. Ryan MaziarzFor fastest support, please submit a ticket at http://support.precisionmanuals.com
August 12, 201114 yr Ryan There are a lot of things wrong in the picture i just loaded up the defualt set-up at gatwick 08R to test the TO/GA switch and get a picture so i could show both FD's for this forum post.It could have its own thread under the heading "what is wrong in this picture" In fact i think someone should start a thread like that. Anthony Jones Intel Core i5 750 2.66GHz 8MB L3 Cache Overclocked to 3.8GHz Gigabyte GA-P55A-UD5 P55 Gigabyte HD 5870 1GB GDDR5 Antec Nine Hundred Antec TruePower 750W Modular PSU Noctua NH-U12P SE2 Western Digital 1TB Hard Drive SATAII 7200rpm G-Skill 4GB (2x2GB) DDR3 1600MHz/PC3-12800 Ripjaw Memory Kit CL7(7-8-7-24) 1.65V Microsoft Windows 7 Home Premium 64-bit, REX, Radar Contact Saitek X65F Joystick and Throttle Saitek Rudder Pedals Track ir 5 with pro clip Zero Flight Experiance New to Flight Sims
August 12, 201114 yr Jan, your MCP speed is set to V2+20. The FD pitch cue will indicate the proper pitch for MCP speed +20, so your initial climb (if you follow the FD pitch cue) will be V2+40. That's too fast...should be V2+20 (plus or minus 5 knots). Best Regards, Kurt "Yoda" Kalbfleisch Pinner, Middx, UK Beta tester for PMDG J41, NGX, and GFO, Flight1 Super King Air B200, Flight1 Cessna Citation Mustang, Flight1 Cessna 182, Flight1 Cessna 177B, Aeroworx B200
August 12, 201114 yr Author You can try mapping à key or button not in THE FMC, but via fsx ( options). That works for me. regards EricI've already done that, but unfortunately it doesn't make much difference. If I set up a button via FSX, it will be overridden by the NGX when you have it loaded. --- MSFS | DCS | X-plane 12
August 13, 201114 yr I've already done that, but unfortunately it doesn't make much difference. If I set up a button via FSX, it will be overridden by the NGX when you have it loaded. Started the sim ready for take off and worked here. Took off, landed and it wouldn't work anymore.
August 13, 201114 yr Is there supose to be a hidden click spot for the TOGA button in the 2d panel? Or only in the 3d/virtual cockpit.
August 13, 201114 yr Hidden click spot for TOGA under the Course selector knob regardless if 2D or VC Dylan Charles "The aircraft G-limits are only there in case there is another flight by that particular airplane. If subsequent flights do not appear likely, there are no G-limits."
August 13, 201114 yr my A/T works but FD do not. when i depart the FD does not engage to provide pitch info. I have both FD engaged CAPT/FO Jamal Pratt Eastern Operations Manager| www.legend-virtual.org
August 14, 201114 yr The click spot works just fine .... When you go to click the hidden spot press and hold down the left mouse button for a second and a half or so .....I found if I just do a quick click A/T doesn't activate, but, if I press and hold down it does. Mike Brown
August 14, 201114 yr Just a shot in the dark... but VC click spot vs 2D panel click spot not functioning correctly?Paul
Create an account or sign in to comment