November 26, 201213 yr Would any one know why an aircraft wont line up with runway using the FMZ and LOC and APP all three dont line up with runway Firas Salim"The joy of being is the joy of being conscious. Uploaded with ImageShack.us
November 27, 201213 yr And the course heading was set? The NAV1 frequency was set? Best regards, Jim Jim Young | AVSIM Online! - Simming's Premier Resource! Member, AVSIM Board of Directors - Serving AVSIM since 2001 Submit News to AVSIMImportant other links: Basic FSX Configuration Guide | AVSIM CTD Guide | AVSIM Prepar3D Guide | Help with AVSIM Site | Signature Rules | Screen Shot Rule | AVSIM Terms of Service (ToS) I7 8086K 5.0GHz | GTX 1080 TI OC Edition | Dell 34" and 24" Monitors | ASUS Maximus X Hero MB Z370 | Samsung M.2 NVMe 500GB and 1TB | Samsung SSD 500GB x2 | Toshiba HDD 1TB | WDC HDD 1TB | Corsair H115i Pro | 16GB DDR4 3600C17 | Windows 10
November 27, 201213 yr use the flight 1 registy repair option should fix your issue I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
November 27, 201213 yr Some ILS beacons are offset from the runway. Victoria is one IIRC. The course setting is not used in ILS Mode. Dave
November 27, 201213 yr use the flight 1 registy repair option should fix your issue I'm a little confused. How can the Flight One registry repair tool fix runway alignments? I'm thinking you posted this in the wrong thread.... Maybe the one where the member refreshed Windows 8 and wiped out his registry settings for FSX. Best regards, Jim Jim Young | AVSIM Online! - Simming's Premier Resource! Member, AVSIM Board of Directors - Serving AVSIM since 2001 Submit News to AVSIMImportant other links: Basic FSX Configuration Guide | AVSIM CTD Guide | AVSIM Prepar3D Guide | Help with AVSIM Site | Signature Rules | Screen Shot Rule | AVSIM Terms of Service (ToS) I7 8086K 5.0GHz | GTX 1080 TI OC Edition | Dell 34" and 24" Monitors | ASUS Maximus X Hero MB Z370 | Samsung M.2 NVMe 500GB and 1TB | Samsung SSD 500GB x2 | Toshiba HDD 1TB | WDC HDD 1TB | Corsair H115i Pro | 16GB DDR4 3600C17 | Windows 10
November 27, 201213 yr To me this is a bug in FSX. I encounter it commonly. Sometimes it's to the right and sometimes to the left. The degrees vary from instance to instance. I've not used large commercial aircraft but GA type and light executive no matter the software. Most of the time it lines up fine and I know there are some legitimate offsets but it's always the same airports and the offsets are the same at those same places all of the time. "Why, he just jumped into the air and kept right on going."
November 27, 201213 yr Some ILS beacons are offset from the runway. Victoria is one IIRC. The course setting is not used in ILS Mode. Dave There is a fix for the CYYJ ILS, so it does line up with the runway. Download the freeware CYYJ airport, it has the fix included. Bert
November 27, 201213 yr To me this is a bug in FSX. I encounter it commonly. Sometimes it's to the right and sometimes to the left. The degrees vary from instance to instance. I've not used large commercial aircraft but GA type and light executive no matter the software. Most of the time it lines up fine and I know there are some legitimate offsets but it's always the same airports and the offsets are the same at those same places all of the time. Yes, some of the original FSX airports had Localisers that were several degrees out of alignment with their runways. I use AFX or AFCAD to fix these easily when I find them. John Rig: Gigabyte B550 AORUS Master Motherboard, AMD Ryzen 7 3800XT CPU, 32GB DDR4 Ram, Gigabyte RTX 2070 Super Graphics, Samsung Odyssey wide view display (5120 x 1440 pixels) with VSYNC on.
November 28, 201213 yr I'm a little confused. How can the Flight One registry repair tool fix runway alignments? I'm thinking you posted this in the wrong thread.... Maybe the one where the member refreshed Windows 8 and wiped out his registry settings for FSX. Best regards, Jim Was thinking off the offset on the nd display where its misaligned not in the above pic which looks like an offset ils approach I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
November 28, 201213 yr I'm a little confused. How can the Flight One registry repair tool fix runway alignments? I'm thinking you posted this in the wrong thread.... Maybe the one where the member refreshed Windows 8 and wiped out his registry settings for FSX. Best regards, Jim I am not sure of why but it has to do with how the add on processes the airport data. People have found the issue commonly with the PMDg md11 and 747 yet the NGX doesn't have it. The registry tool fixes the problem and it is recommended by the support forums as well. It certainly worked for me. Will Reynolds Flight Sim Addict
November 28, 201213 yr I am not sure of why but it has to do with how the add on processes the airport data. People have found the issue commonly with the PMDg md11 and 747 yet the NGX doesn't have it. The registry tool fixes the problem and it is recommended by the support forums as well. It certainly worked for me. Hi Will, I'm still very confused about your comments and I don't want other members here to think your "solution" fixes the problem in the OP. The Flight One Registry tool only repairs the path in the system registry to the FSX program and has nothing to do with alignments to runways or addon processing of airport data. Best regards, Jim Jim Young | AVSIM Online! - Simming's Premier Resource! Member, AVSIM Board of Directors - Serving AVSIM since 2001 Submit News to AVSIMImportant other links: Basic FSX Configuration Guide | AVSIM CTD Guide | AVSIM Prepar3D Guide | Help with AVSIM Site | Signature Rules | Screen Shot Rule | AVSIM Terms of Service (ToS) I7 8086K 5.0GHz | GTX 1080 TI OC Edition | Dell 34" and 24" Monitors | ASUS Maximus X Hero MB Z370 | Samsung M.2 NVMe 500GB and 1TB | Samsung SSD 500GB x2 | Toshiba HDD 1TB | WDC HDD 1TB | Corsair H115i Pro | 16GB DDR4 3600C17 | Windows 10
November 28, 201213 yr Jim, I know the feeling, but it worked for me and also works for quite a few people..see here http://forum.avsim.net/topic/390963-app-to-pafa-ils-20r/#entry2531820 Will Reynolds Flight Sim Addict
November 29, 201213 yr I am not sure of why but it has to do with how the add on processes the airport data. People have found the issue commonly with the PMDg md11 and 747 yet the NGX doesn't have it. The registry tool fixes the problem and it is recommended by the support forums as well. It certainly worked for me. yea the fix also fixed my offset problem as well so it must work since its been used by quite a few already to solve their offset problems I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
November 29, 201213 yr Author So thanks guys for all this info ,, i ended up reinstalling every thing from scratch windows and all .. not only because of this alignment but i was running out of space on my SSD , and i have added a few addons with out being carfull to run each one at a time .. Other people told me it was my navidata was out dated , the Quality wings website told me the navdata that came with the Aircraft is good to go i have tested it yesterday it does the job but still a little out dated sence every thing is running smooth except the FMC data ,, what is your recommendation on what good navdata should i get ??? i am thinking about the Navdatapro from Aerosoft what do you guys thing about this ?? Thanks Much sorry for the delay my PC was down hhh Firas Salim"The joy of being is the joy of being conscious. Uploaded with ImageShack.us
Create an account or sign in to comment