Jump to content
Sign in to follow this  
RXP

Official Panel Configuration Mods

Recommended Posts

On 11/14/2017 at 8:26 PM, ryanbatcund said:

I've now got a small mod that allows minimal VC button functionality for some addons.  This mod adds click functionality for the DirectTo and HOME single button press in the virtual cockpit on the GTN bezel.  Some users have reported the frequency knobs in the lower right work too.  I don't use those however.

Mod has been tested in Carenado Cheyenne III, PA31T, C550, PC12, the Alabeo Ovation and Saratoga TC.  A2A Comanche, Cherokee, C182 (I'll probably do a mod for the 650 for the Connie).  And Realair Legacy v2.  This is only for the single GTN 750.

Hi Ryan,

Could you re-share your solution for getting the DirectTo and HOME buttons to work?  The dropbox link shows a "Too many requests" message.  This is for the A2A Comanche using BillS511's files for the 750 integration.

Thanks!

Greg

Share this post


Link to post
Share on other sites
15 hours ago, gregda said:

Hi Ryan,

Could you re-share your solution for getting the DirectTo and HOME buttons to work?  The dropbox link shows a "Too many requests" message.  This is for the A2A Comanche using BillS511's files for the 750 integration.

Thanks!

Greg

Hi Greg,

This will work with any aircraft. Download this zip file: https://www.dropbox.com/s/8egnuc87fesggcb/rxpGTN.zip?dl=0 The download button is at upper right corner of page. It contains a folder rxpGTN inside that folder is a file f1vc.xml. Extract the folder into the panel folder. Open the panel.cfg file and add the following line below the RXP gauge; gauge01=rxpGTN!f1vc,0,0,1,1 to the appropriate VCockpit section.

Looks look this.

[VCockpit03]
size_mm=1024,1024
pixel_size=1024,1024
texture=$GTN750
background_color=0,0,0

gauge00=rxpGTN!GTN_750_1, 0,0,677,794,NO_BEZEL
gauge01=!f1vc,0,0,1,1

Lastly:
Flight Simulator GPS commands
The GTN may be configured to intercept all of the default FS GPS commands.
Open the settings panel then select "Use Default GPS Commands" advanced
gauge option.

Myself and others have to double click on the bezel buttons. A single click works for others. No one is sure why.

[added by fppilot]

Bill,
Per "works in any aircraft", please recall Line 17 of the f1vc.xml file contains a 4 digit code that varies based on what GTN gauges are in use in that aircraft. So if using a 650 instead of a 750, or using say 750_2 instead of 750_1 requires adjusting that code.

  • Like 1
  • Upvote 2

 

 

Share this post


Link to post
Share on other sites

GTN 750 and Carenado F50

this works for me , run f1 gtn 750F50 then copy this to panel

//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$Panel_5

gauge00=rxpGTN!GTN_750_1,0,0,667,794,NO_BEZEL



Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

 

and this to RealityXP.GTN config

[GTN_750_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; enable touch beyond screen bounds if true (2D only), clip if false (GTN native).
extendtouch = true
; auto-resize dimension (width,height)
refsize = 
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225) (requires SHIFT+left mouse button).
popleft = 
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =15751 
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GTN_750_1.NO_BEZEL]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; enable touch beyond screen bounds if true (2D only), clip if false (GTN native).
extendtouch = true
; auto-resize dimension (width,height)
refsize = 
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225) (requires SHIFT+left mouse button).
popleft = 
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =15751 
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0
 

 

Edited by RXP
  • Like 1

Share this post


Link to post
Share on other sites

GTN 750 integrated into Carenado E50P Phenom 100

Here is the panel.cfg that integrates the RXP GTN 750 into the Carenado Phenom 100 VC & pop up.. See credits to others in comments at top of panel.cfg.

This puts the GTN display on the MFD and keeps the engine etc data panel fully operational. The very top row of the GTN radio bar is not visible but there are click spots to swap Com 1 active / stby and call up the audio panel, etc. The click spot to pop up the G1000 MFD (which is fully functional to provide access to systems and checklists etc) is at the bottom of the VC MFD.  There are numerous files required for gauges and synching CDI from the GTN to the G1000.  AP etc all works perfectly in as much testing as I have done so far.

If anyone wants to implement, send me a PM and I can provide all the require files.

Bruce

EDIT:. I forgot to mention what I think is the best part of the mod: the G1000 MENU button and the DIRECT TO button in the VC have been reprogrammed to call up the RXP GTN HOME screen and DIRECT TO screens since those buttons are only visible in the pop up with bezel. 

Spoiler

//  Phenom 100 RXP GTN 750 panel
//  Panel cfg adapted by B. Buckley from work done by Bert Peike, Jiri Kocman & Jorge Rexach
//


[Window Titles]
Window00=PFD Panel
Window01=MFD Panel
Window02=RealityXP Garmin GTN 750
Window03=Garmin Autopilot
Window04=GFD Mode Controller
Window05=EFIS
Window06=ENGINE SETUP

[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000


//--------------------------------------------------------
[Window00]
Background_color=0,0,0 
size_mm=1400,969
window_size_ratio=1.000  
position=6
visible=0
ident=MAIN_PANEL
window_size= 0.330,0.400  //0.370, 0.600
//window_pos= 0.000, 0.400
no_luminous=1

gauge00=EMB500_G1000!G1000_configEMBP100,  0,0,5,5
gauge01=EMB500_G1000!G1000_PFDEMBP100,  0,0,1400,969
gauge02=EMB500CAR!ToggleCARG1000,  180,0,1000,64
gauge03=Synch_GPS_NAV!Synch_GPS_NAV,    0,0,1,1
///  xml gauge to synch G1000 CDI source to GTN selected source


//--------------------------------------------------------
[Window01]
Background_color=0,0,0 
size_mm=1400,969
window_size_ratio=1.000  
position=8
visible=0
ident=10010
window_size=0.330,0.400  //0.370, 0.600
//window_pos= 0.370, 0.400
no_luminous=1

gauge00=EMB500_G1000!G1000_configEMBP100,  0,0,1,1
gauge01=EMB500_G1000!G1000_MFDEMBP100,  0,0,1400,969
gauge02=EMB500CAR!ToggleCARG1100,  300,0,800,30


//--------------------------------------------------------
[Window02]
Background_color=0,0,0 
size_mm=937,887
window_size_ratio=1.000  
position=2
visible=1
ident=14401
window_size=0.255,0.390
//window_pos= 0.740, 0.400
zorder=99

gauge00=rxpGTN!GTN_750_1, 0, 0,937,887


//--------------------------------------------------------
[Window03]
Background_color=0,0,0 
size_mm=600,148
window_size_ratio=1.000  
position=2
visible=0
ident=10040
window_size= 0.260, 0.150
window_pos= 0.740, 0.250

gauge00=EMB500CAR!Toggle10030,  0,0,24,51
gauge01=EMB500_GAUGE!AUTOPILOT_GARMIN,  0,0,600,148


//--------------------------------------------------------
[Window04]
Background_color=0,0,0 
size_mm=550,417
window_size_ratio=1.000  
position=0
visible=0
ident=380
window_size= 0.260, 0.520
window_pos= 0.740, 0.400

gauge00=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_2DEMB100,  0,0,550,417
gauge01=EMB500CAR!ToggleCAR380,  188,0,200,10


//--------------------------------------------------------
[Window05]
Background_color=0,0,0 
size_mm=512,520
window_size_ratio=1.000  
position=6
visible=0
ident=10070
window_size= 0.140, 0.360
window_pos= 0.430, 0.050
no_luminous=1

gauge00=EFISEMB500!EFIS,  0,0,512,520


//--------------------------------------------------------
[Window06]
Background_color=0,0,0
size_mm=500,1400
window_size_ratio=1.000  
position=3
visible=1
ident=10060
nomenu=1
window_size= 0.200, 0.520
window_pos= 0.400, 0.035
zorder=5

gauge00=GAUGEEMB500!StartWindowsAircraft,  0,0,500,900
gauge01=EMB500CAR!Control_windows,  0,900,500,500


//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_1

gauge00=EMB500_G1000!G1000_configEMBP100,  0,0,1,1
gauge01=GAUGEEMB500!Gauge_CLOCK_DIG,  0,0,1,1
gauge02=EMB500_G1000!G1000_PFDEMBP100VC,  1,4,512,350
gauge03=EMB500CAR!ToggleCARG1000,  64,0,380,32
gauge04=EMB500_G1000!COMMON_UPDATE_G1000PFD,    0,  0,   1,  1
gauge05=Synch_GPS_NAV!Synch_GPS_NAV,            0,  0,   1,      1
///  xml gauge to synch G1000 CDI source to GTN selected source


//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge00=EMB500_G1000!G1000_configEMBP100,      0,0,1,1
gauge01=EMB500CAR!ToggleCARG1100,          72,318,368,12
gauge02=CAREMB500_G1000!GPS_Twas,          0,0,1,1
gauge03=EMB500_G1000!G1000_GTNMFDEMBP100,      0,1,172,357
gauge04=rxpGTN!GTN_750_1, 172,4,272,312,NO_BEZEL
gauge05=EMB500CAR!ToggleCOM_SWAP,              457,47,25,16
gauge06=EMB500CAR!GTN_RXP_DIRECTTO,          457,238,25,16
gauge07=EMB500CAR!GTN_RXP_HOME,              487,238,25,16
gauge08=EMB500_G1000!COMMON_UPDATE_G1000MFD,    0,  0,   1,  1


//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_3

gauge00=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_2DEMB100VC,  0,0,372,283
gauge01=EMB500_G1000!G1000_Audio,  437,0,75,423
gauge02=EMB500_GAUGE!AUTOPILOT_EMB100,  0,403,435,109
gauge03=CarSound_EMB500!CarSound,  2,2,5,5
gauge04=EMB500_Cabin_alt!C340_PRESS,  0,0,1,1
gauge05=EMB500CAR!Toggle10030,  0,0,373,5
gauge06=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_BTN_OUTER,  77,284,95,105
gauge07=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_BTN_INNER,  178,284,95,105


//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_4

gauge00=EMB500_G1000!G1000_PFDEMBP100VC2,  1,3,384,264


//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_5

gauge00=EFISEMB500!EFIS_VC,  0,0,504,508



Day=255,255,255
Night=255,255,255
Luminous=201,64,64

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

 

Edited by bbuckley
  • Like 2
  • Upvote 2

[CPL]  I9-9900K @5.0GHz HT ON, Maximus XI Hero, ASUS TUF RTX4080 OC, 32GB DDR4 3200 14, 1TB NVMe SSD, 500GB SSD, 1TB HDD, 40" Samsung 4K TV, Honeycomb Alpha & Bravo, Logitech Rudder Pedals, WIN11

Share this post


Link to post
Share on other sites

Hello.

I have a question about the RXP GTN750 and 650 for the RealAir Turbine Duke v2 (Prepar3D v4.4 version).

 

Is it possible to use both 750 and 650 ? The mod is for just the 750 and I thinking to buy the 650 also.

 

Thanks

 

Philippe M

Share this post


Link to post
Share on other sites
1 hour ago, PhilippeMendes said:

Is it possible to use both 750 and 650 ?

Yes indeed.

Go to C:\...Turbine Duke V2 P3D4\RealAir\duketv2p3d2\AutoPlay\Files. Open Config.ini. At the top under [App] Change the line; ignoreGtnDetect= to 1. If you also have the Reality XP GNS also change ignoreRxpDetect=1.

[App]
ignoreFsWarning=1
ignoreRxpDetect=1
ignoreGtnDetect=1
p3dVersion=4

Open the Duke configurator app and select the appropriate units.

Install the GTN's in sim the usual way. Menu|Add-ons|Reality XP GTN| Setup Aircraft. Also select the No Bezel option. I use the 750 as unit 1 & 650 as unit 2.

Edited by BillS511
  • Like 1
  • Upvote 1

 

 

Share this post


Link to post
Share on other sites

Thanks a lot ! I'll do it and tell you if it's ok or not.

Philippe M

Edit:

 

It's working ! Thanks for your help BillS511, Appreciate.

Philippe Mendes

 

Edited by PhilippeMendes
  • Like 2

Share this post


Link to post
Share on other sites

Alabeo Diamond DA40

Hi I have put the RXP GTN 750 into the A2A's but I also have an Alabeo  DA40 and tried to insert the 750 via the Xp in the game method. It allow you to custom size it but I tried many different resizes and just cannot get it to line up in the window of the GNS430 that is in the DA40. I got it to work pretty decently with this for gauge00 in the panel.cfg:

[Vcockpit01]
Background_color = 0,0,0
size_mm = 512,512
visible = 0
pixel_size = 513,513
texture = $Panel_1
gauge00 = rxpGTN!GTN_750_1, 73, 32,325,165
gauge01 = CarenadoG430_3D_DA40!GNS430_nc2,  0,257,512,256
gauge02 = DA40!ToggleCARG1000,     64,0, 256, 32
gauge03 = ALSound_PA32TC!CarSound,       0, 0,  1,  1
gauge04 = ALDA40!SYS_SMOKE,    0, 0, 1, 1

  • Like 1

Share this post


Link to post
Share on other sites

A2A Cherokee 180 configuration for the GTN 650/750.

First backup the panel_F1_650.cfg, panel_F1_750.cfg, and RealityXP.GTN.ini files. Use the Cherokee Aircraft Configurator P3D4 as usual to change gauges.

Download via Dropbox. A2A180_RXP_GTN.zip

To adjust the screen brightness open RealityXP.GTN.ini. Go to:

[GTN_750_1.NO_BEZEL] or [GTN_650_1.NO_BEZEL]
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright = 14403
; offset brightness (-100 to +100)
brightness.screen = 0
to make dimmer set to around -50, -40 etc.

Edited by BillS511
  • Like 5

 

 

Share this post


Link to post
Share on other sites
On 12/8/2018 at 3:20 PM, BillS511 said:

Hi Greg,

This will work with any aircraft. Download this zip file: https://www.dropbox.com/s/8egnuc87fesggcb/rxpGTN.zip?dl=0 The download button is at upper right corner of page. It contains a folder rxpGTN inside that folder is a file f1vc.xml. Extract the folder into the panel folder. Open the panel.cfg file and add the following line below the RXP gauge; gauge01=rxpGTN!f1vc,0,0,1,1 to the appropriate VCockpit section.

Looks look this.

[VCockpit03]
size_mm=1024,1024
pixel_size=1024,1024
texture=$GTN750
background_color=0,0,0

gauge00=rxpGTN!GTN_750_1, 0,0,677,794,NO_BEZEL
gauge01=!f1vc,0,0,1,1

Lastly:
Flight Simulator GPS commands
The GTN may be configured to intercept all of the default FS GPS commands.
Open the settings panel then select "Use Default GPS Commands" advanced
gauge option.

Myself and others have to double click on the bezel buttons. A single click works for others. No one is sure why.

[added by fppilot]

Bill,
Per "works in any aircraft", please recall Line 17 of the f1vc.xml file contains a 4 digit code that varies based on what GTN gauges are in use in that aircraft. So if using a 650 instead of a 750, or using say 750_2 instead of 750_1 requires adjusting that code.

Bill: Thank you for your help on this forum! I now have an operating RXP GTN 750 in my A2A Comanche, and RXP GTN 650 in my A2A Texan! One thing I noticed, however, which is that the mouse wheel frequency changes work in the opposite direction to that in the pop-up instrument. A tiny thing, but I fixed it by opening f1vc.xml with Notepad and changing the four lines in the main section as shown:

            l0 12 == l0 18 == or if{ l1 8 & (>K:GPS_GROUP_KNOB_DEC) }
            l0 14 == l0 19 == or if{ l1 8 & (>K:GPS_GROUP_KNOB_INC) }
            l0 20 == l0 26 == or if{ l1 8 & (>K:GPS_PAGE_KNOB_DEC) }
            l0 22 == l0 27 == or if{ l1 8 & (>K:GPS_PAGE_KNOB_INC) }

Maybe it's just a peculiarity of my computer, I dunno, but now I believe that's as close as I can get until A2A puts out an update with the RXP GTNs. 

Thank you!

Seeya
 ATB

  • Like 2

Share this post


Link to post
Share on other sites

Milviz PC6 with RXP GTN 750 & 650

GTN replace with addon menu, then, NO_BEZEL parameter and section added for perfect integration in 3D cockpit

panel.cfg

  Quote

[Window03]
Background_color=0,0,0 
size_mm=937,390
window_size_ratio=1.000  
position=7
visible=0
ident=14403
window_size= 0.340, 0.260
window_pos= 0.660, 0.728
zorder=99

gauge00=rxpGTN!GTN_650_1, 0, 0,937,390

[Window04]
Background_color=0,0,0 
size_mm=937,990
window_size_ratio=1.000  
position=7
visible=0
ident=14401
window_size= 0.340, 0.580
window_pos= 0.660, 0.160
zorder=99

gauge00=rxpGTN!GTN_750_1, 0, 0,937,990

 

[Vcockpit15]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$GTN750

gauge00=rxpGTN!GTN_750_1, 0, 0,677,794,NO_BEZEL

[Vcockpit16]
Background_color=0,0,0 
size_mm=1024,512
visible=1
pixel_size=1024,512
texture=$GTN650

gauge00=rxpGTN!GTN_650_1, 0, 0,677,297,NO_BEZEL

sections added to RealityXP.GTN.ini :

  Quote

[GTN_750_1.NO_BEZEL]
; is the master device if true.
MasterDevice = false
LinkVor = true
UseAudioPanel = false
UseRyanTcad = true
UseSimGpsCmds = true
FuelType = AVGAS
; TAWS approach air speed (knots) or -1 (auto detect Vref: 12300)
TawsApprSpeed = 79
; TAWS flap extension speed (knots) or -1 (auto detect Vfe: 95)
TawsFlapSpeed = 120
; TAWS gear extension speed (knots) or -1 (auto detect Vle: 0)
TawsGearSpeed = 150
VoicePref = MALE
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

 

[GTN_650_1.NO_BEZEL]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting percent (0 to 100) or index (-1) (using rxp.panel.rheostat_screen)
Rheostat.Display = 100
; integral lighting percent (0 to 100) or index (-1) (using rxp.panel.rheostat_integral)
Rheostat.Buttons = 75
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = true
; connects GPS to Autopilot if true.
LinkOto = true
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; enables automatic GPS/VLOC selection.
AutoSelect = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: 
; ALWAYS_ON,AVIONICS_ON,PANEL_ON,BUS_MAIN,BUS_AVIONICS,BUS_BATT,BUS_HOTBATT,BUS_1,BUS_2,BUS_3,BUS_4
PowerSource = AVIONICS_ON
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to Audio Panel if true.
UseAudioPanel = true
; connects GPS to Transponder if true.
UseTransponder = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = AVGAS
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), or -1 (auto detect Vref: 65)
TawsApprSpeed = 79
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 120)
TawsFlapSpeed = 120
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 0)
TawsGearSpeed = 150
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; use transponder VFR code: USE_CODE,VFR_US,VFR_EUR
VFRmode = VFR_US
; main: CDI Key
AFMS.cdi_key = 
; main: Selected Course for GPS
AFMS.sel_crs_gps = 
; main: Selected Course for VLOC
AFMS.sel_crs_vloc = 
; main: V-Flag State (1: declutter
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: Airspace Labels
AFMS.airspace_labels = 
; nav : Mark On Target
AFMS.mark_on_target = 
; nav : RF Procedure Legs
AFMS.rf_procedure_legs = 
; vnav: Vertical Navigation Type (0: VCALC, 1: VNAV)
AFMS.vnav_enabled = 
; vnav: Transition To Approach
AFMS.vnav_trans_to_appr = 
; vnav: VDI Scale (ft)
AFMS.vnav_vdi_scale_factor = 
; vnav: Transition Altitude (180 = FL180)
AFMS.vnav_trans_altitude = 

 

  • Like 2

Kevin Firth - i9 10850K @5.2; Asus Maximus XII Hero; 32Gb Cas14 3200 DDR4; RTX3090

Beta tester for: UK2000; JustFlight; VoxATC; FSReborn; //42

xaP1VAU.png

Share this post


Link to post
Share on other sites
On 7/8/2021 at 7:33 PM, kevinfirth said:

Milviz PC6 with RXP GTN 750 & 650

GTN replace with addon menu, then, NO_BEZEL parameter and section added for perfect integration in 3D cockpit

Note: Milviz PC6 also needs a slight additional mod to the panel.cfg if you want the bezel controls to work [see other thread for specifics about this]

For anyone using this you will need to also comment out the existing gauge which seems to be conflicting.

[Vcockpit02]
//gauge04=Console!console_GTN750_650,  0,0,1,1
gauge11=rxpGTN!f1vc,0,0,1,1

 

Edited by kevinfirth
  • Like 1

Kevin Firth - i9 10850K @5.2; Asus Maximus XII Hero; 32Gb Cas14 3200 DDR4; RTX3090

Beta tester for: UK2000; JustFlight; VoxATC; FSReborn; //42

xaP1VAU.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...