May 2, 20206 yr This was working nicely in V5 RTM, but now it blows up my main memory when loading. Does this work for anyone? Bert
May 2, 20206 yr Hi Bert, It did crash once but not anymore since I deleted my shaders folder. Hope it helps. Edited May 2, 20206 yr by David Roch - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
May 2, 20206 yr 9 minutes ago, Bert Pieke said: This was working nicely in V5 RTM, but now it blows up my main memory when loading. Does this work for anyone? Tested extensively with no issues. It was a clean install of P3D v5 with a clean install of TNCM. MSFS
May 2, 20206 yr 11 minutes ago, Bert Pieke said: This was working nicely in V5 RTM, but now it blows up my main memory when loading. Does this work for anyone? Hi Bert working fine here (clean install) 🙂 Edited May 2, 20206 yr by awf André
May 2, 20206 yr Now that we are talking about Flytampa. Anyone to manage KLAS without CTD?( and the configurator?) Michael Moe Edited May 2, 20206 yr by Michael Moe Michael Moe
May 2, 20206 yr 2 minutes ago, Michael Moe said: Now that we are talking about Flytampa. Anyone to manage KLAS without CTD? Michael Moe Going to test now..., is it during load? Configurator working fine Edited May 2, 20206 yr by awf André
May 2, 20206 yr 1 minute ago, awf said: Going to test now..., is it during load? Yea and sometimes in flight driver error Michael Moe Edited May 2, 20206 yr by Michael Moe Michael Moe
May 2, 20206 yr I would be curious to see what happens when I attempt to land......Just took off from CYYZ to CYVR....vRAM in my case is 20% less so far...all ORBX etc. Interestingly FPS, while lower (but not much) at FT CYYZ is very smooth and fluid... which I haven't experienced in V4.5, never. Even with original V5 vRam was good and no CTD...but I hit a "wall" while landing...LSZH was ok but CYYZ @ 800 went down..... All what I want to know if "wall" disappeared in front of the runway! Alex
May 2, 20206 yr 11 minutes ago, Michael Moe said: Yea and sometimes in flight scripts driver error Michael Moe Michael what I noticed with some installations and the configurator, is that some options are double checked, What I do to solve it is edit by hand and disable the bgl file I don't need and run the configrator again and it's solved. Ok going to test maybe that's the reason for the crash that some bgl should be enabled, easy to check if there are both check box options enabled... Tested and loading fine no problems have to do some more testing but at this point all working fine Edited May 2, 20206 yr by awf André
May 2, 20206 yr 7 minutes ago, awf said: Michael what I noticed with some installations and the configurator, is that some options are double checked, What I do to solve it is edit by hand and disable the bgl file I don't need and run the configrator again and it's solved. Ok going to test maybe that's the reason for the crash that some bgl should be enabled, easy to check if there are both check box options enabled... Thanks make sense but my configurator is not working. It crashes in eventview. Only v4 is working. It worked in v5 just not 5.1 Michael Moe
May 2, 20206 yr 5 minutes ago, Michael Moe said: Thanks make sense but my configurator is not working. It crashes in eventview. Only v4 is working. It worked in v5 just not 5.1 Maybe to move all scenery out of the Flytampa folder to a temporary backup folder and start from there, to add one by one and test the configurator? Configurator works fine here with all Flytampa stuff installed Have only weird white flickers around autogen trees when enhanced atmospherics is enabled... But that is still a bug with the beta... Edited May 2, 20206 yr by awf André
May 2, 20206 yr 4 minutes ago, awf said: Maybe to move all scenery out of the Flytampa folder to a temporary backup folder and start from there, to add one by one and test the configurator? Configurator works fine here with all Flytampa stuff installed Thanks will try that Michael Moe Michael Moe
May 2, 20206 yr for me too. Configurator working and also KLAS. C. W. ,Ryzen 9 5950X @H2O , 32 GB RAM DDR4 3600 Mhz CL15 , Corsair MP600 Pro Watercooled 2 TB for P3D, Samsung SSD980 1 TB for Addons and Crucial MMX500, Red Devil Ultimate 6900 XT
May 2, 20206 yr 4 minutes ago, 331BK said: for me too. Configurator working and also KLAS. Strange i get a .nettime error in eventview , cant open the word not allowed thing (KERNELBASE.dll) Michael Moe Michael Moe
May 2, 20206 yr Author 1 hour ago, awf said: Hi Bert working fine here (clean install) 🙂 Thanks, Reinstalling.. will report back.. Edited May 2, 20206 yr by Bert Pieke Bert
Archived
This topic is now archived and is closed to further replies.