May 5, 20206 yr I would like to install the Real Air Turbine Duke into P3D v5, anybody done this yet, how can I do this ? I am a registered user of the Turbine Duke v2 and the Lancair Need some expert help please
May 5, 20206 yr If I recall, I ran the installer but it put the add-on.xml into documents\Prepar3D v4 Add-Ons and I had to move the folder over to my Prepar3D v5 Add-Ons folder, and that was it. 5800X3D | Radeon RX 6900XT
May 5, 20206 yr Author 1 hour ago, cwburnett said: If I recall, I ran the installer but it put the add-on.xml into documents\Prepar3D v4 Add-Ons and I had to move the folder over to my Prepar3D v5 Add-Ons folder, and that was it. this is how I did it, I originally had both aircraft in C/RASDuke/sim objects/Airplanes just copy the folder to v5 sim object/airplanes
May 5, 20206 yr I simply used the installer (P3D-V4) for Duke T, P, & Lanc, directed it to P3D-v5, works excellent for me. Great acft. Good luck!! High end with 5090, VR, 2020 & 2024.
May 5, 20206 yr works perfectly in v5 just point installer to v5 Colin hodds I7 9700K,nvidia 3090 ,ssd ,32gig 3200mhz ram ,win10,prep3d
May 5, 20206 yr One of my favorite planes so far in v5. ROG MAXIMUS X HERO, Intel Core i7 8700K, 32 GB's 3200 RAM, Gigabyte RTX3080,
May 5, 20206 yr Juste question, can we install in P3dv5 without having P3dv4. Guillaume ASUS ROG STRIX X870 ▪︎ AMD RYZEN 9950X OC 5.5 GHz▪︎ ASUS ROG ASTRAL RTX 5090 OC ▪︎ 32GB 6600 Crucial Ballistix ▪︎ Windows 11 Pro (25H2) ▪︎ 4x Samsung 990 Pro 2TB NVME SSD (OS Drive et MSFS) ▪︎ Corsair RMX 1000W 80 plus Gold PSU ▪︎ LIAN-LI ODYSSEY X black case
May 5, 20206 yr 31 minutes ago, guibru said: Juste question, can we install in P3dv5 without having P3dv4. I don't think so - when I tried that, the installer said that it could not find P3Dv4 and wouldn't let me proceed. Once I re-installed v4, I was able to then install into v4 and copy my RealAir add-ons folder from the v4 Addons folder to v5 Addons folder, and everything worked fine. Only issue is lights don't illuminate the ground, but other than that it seems to work OK. I had one DXGI_device_error_hung crash on a Turbine Duke flight when I had the F1 GTN popup window open and Alt-Tab'd to something else, but I can't necessarily pin that on the airplane or the F1 GTN... I think the way v5 interacts with the DX12 drivers with different windows open is still buggy even after the hotfix (at least, that is the common thread I see). Actually, one other issue I see with the Turbine Duke is that the weights and balances don't seem to be right; with loads that would have been fine in v4, the CG is way forward in v5. Anyone else seeing that? I had to compensate by pretending I had 300lb of baggage sitting in the rearmost passenger seats. Edited May 5, 20206 yr by PurdueKev - Kevin Windows 11 / Ryzen 7 9800X3D / MSI RTX-4080 Super 16G Ventus 3X / Gigabyte B850 Aorus Elite WiFi 7 / Arctic Liquid Freezer III Pro / 64GB Lexar ARES Gen2 RGB DDR5 6000Mhz CL30 RAM / Dell Alienware AW3418DW WQHD 3440x1440 GSync / Samsung 970 EVO Plus M.2 2TB (OS) & 860 EVO 4TB SDD / WD Caviar Black 4TB HDD / EVGA Supernova 850 G5 PSU / Be Quiet Light Base 600 LX case / Virpil Warbird base with Constellation Alpha grip / MFG Crosswind rudder pedals / Virtual-Fly TQ6+ throttle quadrant / Winwing Orion HOTAS F-18 Throttle / Virpil TCS+ collective base with Hawk-60 grip / Saitek Trim Wheel / Saitek Radio and Switch Panels / Winwing Combat Ready Panel / Tobii 5
May 5, 20206 yr 32 minutes ago, guibru said: Juste question, can we install in P3dv5 without having P3dv4. Yes, if you are comfortable editing the registry. I just made a dummy v4 registry entry that points to the my v5 installation location. The installer recognizes v4 being installed and worked without a hitch. 9800X3D | 5090 | 64GB DDR5 | LG C2 42"
May 5, 20206 yr I ran the installer when it got to the page of what sim to install to all options were greyed out so i clicked on next and was able to install into My P3d V5 folder. did that for Both Duke versions Been flying the Duke all day. Good Luck Brian
May 5, 20206 yr 6 hours ago, byronp said: I ran the installer when it got to the page of what sim to install to all options were greyed out so i clicked on next and was able to install into My P3d V5 folder. did that for Both Duke versions Been flying the Duke all day. Good Luck Brian This works but without the registry entry I don't think you are able to use the configuration utility. 9800X3D | 5090 | 64GB DDR5 | LG C2 42"
May 7, 20206 yr Don't mean to go off topic, but is there anyone who knows how to.... ADD AUTOTHROTTLE TO THE DUKE TURBINE? I've changed the 0 to 1 in the aircraft config for autothrottle, but that didn't work. I've read that a gauge is necessary, but maybe someone has done this successfully to any plane that didn't have it, and found a way to make it work. The autopilot on the Turbine works great, but the speed can easily get away from you if you're not "babysitting" the plane. Thanks in advance. Stan
May 7, 20206 yr 32 minutes ago, spilok said: Don't mean to go off topic, but is there anyone who knows how to.... ADD AUTOTHROTTLE TO THE DUKE TURBINE? I've changed the 0 to 1 in the aircraft config for autothrottle, but that didn't work. I've read that a gauge is necessary, but maybe someone has done this successfully to any plane that didn't have it, and found a way to make it work. The autopilot on the Turbine works great, but the speed can easily get away from you if you're not "babysitting" the plane. Thanks in advance. Stan You bring it back to the dealer where you bought the plane and pay him $80.000 This airplane needs pilot attention.. otherwise you might as well be flying the B60 Piston Duke. Bert
May 7, 20206 yr 2 hours ago, Bert Pieke said: You bring it back to the dealer where you bought the plane and pay him $80.000 This airplane needs pilot attention.. otherwise you might as well be flying the B60 Piston Duke. Yes. I figured that! Stan
May 13, 20206 yr On 5/5/2020 at 5:20 PM, vrdubin6 said: Yes, if you are comfortable editing the registry. I just made a dummy v4 registry entry that points to the my v5 installation location. The installer recognizes v4 being installed and worked without a hitch. hey, Would you please help me to do that ? I've just uninstall V4 to have all the space for a brand new clean V5 :) Dont really want to reinstall v4 :D
Archived
This topic is now archived and is closed to further replies.