May 12, 20206 yr Just curious....what's your LONGEST flight in V5? I've tried some of the 737s, 757s, I've had and used in P3dv4.5 and in every case....the flight becomes a "stutterfest" before 100 miles from destination. I'm usually at Fl30 or so and everything looks great up until the last 1/3 of the flight. Say KPHL (Philly) to KDET (Detroit). Everything works great close to Erie (KERI) and then the "stuff hits the fan" and stuttering along with outside plane textures and VC start to deteriorate quickly. I usually have to end the flight. I love V5 but 4.5 never did this to me. Starting to get a little concerned. Stan
May 12, 20206 yr Moderator Took an 800 mile flight the other night Stan in the F35 - was testing AS weather - had no problems at all - with AS or P3D. Vic RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
May 12, 20206 yr Well. I too today the first time. TNCM to GCLP. 100NM before arriving textures at GCLP blurrie and very washed out. My 8 core 9700k ran hot as never before. Most cores above 80 degrees celsius. Never ever had this before. Had to end the flight to. Flew PMDG 748. This was very strange. Have to figure out what was the cause. Just installed SODE 1.7.0 before. Could that be the cause? OIther have issues too after longhaul flight? Regards, Marcus P.
May 12, 20206 yr Disregard. Edited May 12, 20206 yr by flyinpilot212121 Intel I7 12700KF / 32 GB Ram-3600mhz / Windows 11 - 64 bit / NVIDIA GeForce RTX 3060TI / 32" Acer Monitor, Honeycomb alpha/bravo, CH rudder pedals, Tobii 5, Buttkicker, Logitech radio panel.
May 12, 20206 yr Author 16 minutes ago, vgbaron said: Took an 800 mile flight the other night Stan in the F35 - was testing AS weather - had no problems at all - with AS or P3D. Vic Yes. P3d Default airplane. That figures. Mine were not default. Stan
May 12, 20206 yr CYVR-CYUL (FT)..... unload, fuel, load, push back....CYUL-EDDF(Aerosoft)....and haven't shut down or restarted ...so, close to 13 hrs, smooth like a butter... really nice....Night "drive" didn't like it, for some reason V4 is lighter, or moon is brighter or stars are brighter, not sure what it is. Today on way back had two CTD...looks like GSX2 since it happened exactly after request for "good engine start"...but again I am with Q787 which might not be compatible...so far only issue I had so far. Edited May 12, 20206 yr by cyyzrwy24 Alex
May 12, 20206 yr Today EHGG - BIKF - CYYT no problems at all, great flight! Flysimware Learjet and FSGRW, cockpit setup with Air Manager, Reality XP 750. Great Fps and visuals! Edited May 12, 20206 yr by rob0203
May 12, 20206 yr 455 mile cargo flight in a DC-3: EGCC to EDDK. Not a long way, but a long time in a DC-3. Alan Bradbury Check out my youtube flight sim videos: Here
May 13, 20206 yr Around 1400 nm. MMUN Cancun to TNCM Princess Juliana with a Modded Carenado FA50 + GTN750, at FL380. Using: HiFi ASP3D Beta. UTX Tropical America & Caribbean. ORBX Global. FSimStudios MMUN & FlyTampa StMaarten TNCM. Gorgeous Flight. Edited May 13, 20206 yr by RamonB Ramón. Time, is the one thing no one can buy.
May 13, 20206 yr I haven't flown much lately due to lack of both time and, frankly, interest. But yesterday I decided to reinstall V5 with the hotfix and then install PMDG 744 to do a test-flight. It was about 800NM. Only add-ons in my V5 right now are the aforementioned 744 and ORBX. Must say I was impressed. Smooth performance and no hiccups what so ever. My computer ran way cooler than on V4 for some reason. Only thing I kind of noticed was that the colors seem a tad too saturated..? My system: AMD3900X 32GB 2080Ti. Sim installed on M2 SSD. Richard 7950x3d | 32Gb 6000mHz RAM | 8Tb NVme | RTX 4090 | MSFS | P3D | XP12
May 13, 20206 yr Those having suddenly FPS problems while P3Dv5 is running for some time, try this: go in the menue, change any setting and then click on "cancel". It restored my FPS several times... Greetings, Chris AMD Ryzen 7 9800X3D, 2x32GB DDR5 6000MT/s RAM, MSI RTX 4090 Ventus 3X, Windows 11 Home, MSFS2024
May 13, 20206 yr Author I also found that REX SkyForce, which I was originally using for weather before Active Sky got updated, could be a culprit. I did stop using it for weather, but I was STILL USING IT FOR CLOUDS AND SKY. I believe that because it is NOT READY for V5, it caused stuttering as the flight moved on. I stopped using it last night and things became very smooth...so I think that may be the issue. BTW, what are you all using for skies and clouds? Are you just using the clouds that form in Active Sky and P3d? Stan Edited May 13, 20206 yr by spilok
May 13, 20206 yr Moderator I'm using ASCA with ASP3D Stan. RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
May 13, 20206 yr 3 hours ago, spilok said: I also found that REX SkyForce, which I was originally using for weather before Active Sky got updated, I am flying first time with SF and ASP and it works nicely for me...will see. WX gets injected properly.... Alex
May 13, 20206 yr Author 3 minutes ago, cyyzrwy24 said: I am flying first time with SF and ASP and it works nicely for me...will see. WX gets injected properly.... You're using SF for weather AND ASP for weather? Both? Stan
Archived
This topic is now archived and is closed to further replies.