11 minutes ago, N7470 said:

Just had my first flight in the cj4 mod after patch and it's working great (not other mods installed yet).  The autopilot does a much better job above 30k now.

I did notice the PPH on sys dispaly is showing zero when the "sys" button is pushed, but shows real values on the upper menu sys display.

Agreed however the AI still can't fly it properly. Unable to T/O (had to do manually) and it needed to manually be driven onto the magenta line in the climbout. on APP to ILS it took the ATC instruction and proceeded to drive itself slowly down into a mountain nowhere near the airport. So unable to join a APP course evidently.  Does the A/P do a better job when manually sequencing these?

3 hours ago, Flyfaster said:

Agreed however the AI still can't fly it properly.

Unfortunately, we will be unable to improve anything in this area from our end. The entire AI flight system is built in to the sim and there is no aircraft code for it that we can access. Until Asobo fixes this, it's going to be what it is.

-Matt

1 minute ago, MattNischan said:

Unfortunately, we will be unable to improve anything in this area from our end. The entire AI flight system is built in to the sim and there is no aircraft code for it that we can access. Until Asobo fixes this, it's going to be what it is.

-Matt

Understood and frustrating but it is great you are aware and looking into these things! Just tried putting community mods back into the folder including yours, but had some issues unfortunately.

Here is a draft interim SoP document for the CJ4: https://docs.google.com/document/d/15qb3g2ECsA8XH6gSbqbe5kGydNJ3Tj0j7vJPAWirwh4/edit?usp=sharing

Remember this is to be used in conjunction with the complete checklists we've implemented in the MFD.

Edited October 14, 20205 yr by cwburnett

Thanks for the SOP, greatly appreciated.

Ray

Geez, I don't know whats happening. Flying KSEZ to KLAS, FL280. I have tried this flight twice now. Get to cruise altitude LNAV, AP on, then all of a sudden she turns and dives to the left, then turns sharp right and just dives into the ground. Is the AP broke in MS2020? I am using latest patch of MS2020 and 0.4.1 update.In mt community folder is Buildings fix, liveries, tooltips see through, and working title - aircraft 0.4.1. Is there a different way to fly this without using MS2020 AP? 

Does anyone know how manually change course. I tried to change source from FMC to VOR, but course knob doesn't seem do anything

I was using FSUIPC last night in an attempt to decipher some buttons/switches and I noticed something strange that I haven't seen on the other planes I've used it with so far. 

 

The FSUIPC log files shows these events being thrown constantly. As in multiple times a second. I wonder if this is normal and/or could be the cause of any issues?

 

Quote

2793704 *** EVENT: Cntrl= 68067 (0x000109e3), Param= 0 (0x00000000) ALTITUDE_SLOT_INDEX_SET
  2794125 *** EVENT: Cntrl= 65962 (0x000101aa), Param= 19 (0x00000013) FUEL_SELECTOR_SET
  2794125 *** EVENT: Cntrl= 66523 (0x000103db), Param= 20 (0x00000014) FUEL_SELECTOR_2_SET
  2794219 *** EVENT: Cntrl= 68067 (0x000109e3), Param= 0 (0x00000000) ALTITUDE_SLOT_INDEX_SET
  2794657 *** EVENT: Cntrl= 65962 (0x000101aa), Param= 19 (0x00000013) FUEL_SELECTOR_SET
  2794657 *** EVENT: Cntrl= 66523 (0x000103db), Param= 20 (0x00000014) FUEL_SELECTOR_2_SET
  2794735 *** EVENT: Cntrl= 68067 (0x000109e3), Param= 0 (0x00000000) ALTITUDE_SLOT_INDEX_SET

 

3 hours ago, Dutch1 said:

Geez, I don't know whats happening. Flying KSEZ to KLAS, FL280. I have tried this flight twice now. Get to cruise altitude LNAV, AP on, then all of a sudden she turns and dives to the left, then turns sharp right and just dives into the ground. Is the AP broke in MS2020? I am using latest patch of MS2020 and 0.4.1 update.In mt community folder is Buildings fix, liveries, tooltips see through, and working title - aircraft 0.4.1. Is there a different way to fly this without using MS2020 AP? 

Yes. File a bug report on Zendesk and up vote the thread there on this.

On 10/12/2020 at 8:50 PM, cwburnett said:

Well, quick on the heels of v0.4.0, here is v0.4.1 of the Working Title CJ4. While we fully expect to have to release ANOTHER update after the impending Asobo update, this work was all done, so we figured we'd make it available anyhow...

I just want to say after using this update for the CJ4 it's really refined now.  I'm really loving what you guys have done.  This is all but finished but I know there's more to go.  Great Job!

Just did a nice flight with the latest MSFS update and new CJ update.  I used the Simbrief template that was provided and went from KSAN - KSMF.  SImbrief estimate was 1:10 of flight time.  I touched down and my flight was 1:10 to the minute!  This was using live WX so the winds aloft appear to be pretty accurate and the airports seemed to match current Metars pretty closely.  I meant to look at my fuel remaining to compare it to the FP but forgot.  The new CJ4 SOP that was posted is great as well. These guys are doing a great job. Best flight I have had yet!

Edited October 15, 20205 yr by Flic1

I have to figure out the FMS... I can't add waypoints? Probably user error! I also found some weird buggy stuff happening, the engine switches only were set to run, and would not change... I will try a return flight now and see whats going on. Starting to like this bird! I successfully flew an ILS.. that was a win.

6 hours ago, sd_flyer said:

Does anyone know how manually change course. I tried to change source from FMC to VOR, but course knob doesn't seem do anything

Right now you can't adjust CRS on NAV2, only NAV1. It's on the list to try and find a fix for.

If you have the PFD set to VOR1 and you have a VOR tuned (TUN Page on FMS) and it is in range, you should be able to adjust the CRS. It won't work if you're tuned to an ILS freq (even if not in range) or a VOR freq that is not in range.

If you still can't get it going, throw an issue into Github and we'll have a look, but I tuned a VOR a couple days ago because I was trying to fix VOR 2.

BTW, check out the latest release - the G3000 is in pre-release right now.

Also, sneak peak, Arrival and Departure Transitions are (FINALLY) coming to a PL21 FMS3000 near you 😉

 

I noticed tonight that when I went to fly the G36, it wouldn't move past the TAWS TEST on the screen (which caused nothing in the G1000 to work). The only thing I've added was the updated G3000. Removing it and loading back the G36 and all was fine. Can you please check this to make sure it's not conflicting? Or is there any certain way it needs to be loaded in the Community folder? I've made sure the Bonanza is after the Working Title mods.