October 27, 20205 yr Now a v5 version. Released. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 27, 20205 yr One crash due to VRAM starvation when I launched ActiveSky. One crash when I executed my flightplan city pair. (g2d.dll, version 5.0.31.35253) Not a good start for me.... EASA PPL SEPL + NQ / CB-IR in progress MSFS24 | X-Plane 12
October 27, 20205 yr Just now, SAS443 said: One crash due to VRAM starvation when I launched ActiveSky. One crash when I executed my flightplan city pair. (g2d.dll, version 5.0.31.35253) Not a good start for me.... You using the low res version? It still sucks up VRAM but maybe that would help. I don’t know why they set the high res version as default when it’s essentially unusable.
October 27, 20205 yr 24 minutes ago, Chapstick said: You using the low res version? It still sucks up VRAM but maybe that would help. I don’t know why they set the high res version as default when it’s essentially unusable. Will not bother with low res. It looks rather bad on a 4k screen. And I have 11gb vram. Being forced to use low res is ridiculous. Most of my gfx sliders are at 75%, so nothing maxed out, really. EASA PPL SEPL + NQ / CB-IR in progress MSFS24 | X-Plane 12
October 27, 20205 yr Have you disabled Trueglass? It still causes the dreaded DXGI hang for me in v5 HF2, and the KA350i uses it. If you've previously disabled it and then reinstalled the new 1.40 version (or another add-on that uses it, like the TFDi 717 or the QW787) it will re-install that Trueglass gauge dll. I haven't seen more than about 7-8 GB of VRAM committed on my 2080Ti, and I'm using the high res panel and 4096 max texture size. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
October 27, 20205 yr 31 minutes ago, w6kd said: Have you disabled Trueglass? It still causes the dreaded DXGI hang for me in v5 HF2, and the KA350i uses it. Thanks for the advice, I think it's activated on my setup. You can disable it via MVAMS menu, correct? EASA PPL SEPL + NQ / CB-IR in progress MSFS24 | X-Plane 12
October 27, 20205 yr 2 hours ago, w6kd said: Have you disabled Trueglass? It still causes the dreaded DXGI hang for me in v5 HF2, and the KA350i uses it. If you've previously disabled it and then reinstalled the new 1.40 version (or another add-on that uses it, like the TFDi 717 or the QW787) it will re-install that Trueglass gauge dll. I haven't seen more than about 7-8 GB of VRAM committed on my 2080Ti, and I'm using the high res panel and 4096 max texture size. Thanks for the tip about trueglass, I will give that a try. Whom are we waiting for an update, trueglass or LM? EDIT: Simbol said in another thread he believes TG is getting updated. so hopefully this will help with RAM consumption. Edited October 27, 20205 yr by TurboKen Flight Simulator's - Prepar3d V5/MSFS | Operating System - WIN 11 | Main Board - GIGABYTE X870E Aorus Elite WIFI7 | CPU - AMD 9800X3D | RAM - CORSAIR 64GB 6600Mhz | Video Card - EVGA RTX3090 FTW3 Ultra | Monitor - DELL 38" Ultrawide | Case - CORSAIR 750D Full Tower | CPU Cooling - CORSAIR H170i Elite LCD 420mm Push/Pull | Power Supply - EVGA 1000 G+ | Sound System - Definitive Technology ProMonitor 600 w/subwoofer
October 28, 20205 yr 3 hours ago, SAS443 said: Thanks for the advice, I think it's activated on my setup. You can disable it via MVAMS menu, correct? No, I don't think so. I disable it by renaming the trueglass.dll file in the P3Dv5 gauges folder. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
October 28, 20205 yr 8 hours ago, w6kd said: No, I don't think so. I disable it by renaming the trueglass.dll file in the P3Dv5 gauges folder. There is an option to disable 'TrueGlass' in the Add-ons menu. bob
October 28, 20205 yr 2 hours ago, onebob said: There is an option to disable 'TrueGlass' in the Add-ons menu. There appears to be a problem with disabling 'TrueGlass' from the Add-ons menu as on next start of Prepard3d I get a black screen outside of vc, ie no scenenery, however switching 'Truglass back on restored it., most odd bob
Archived
This topic is now archived and is closed to further replies.