Available on their forums for now, will arrive by email later. 

Milviz/Blackbird Simulations C310R SP1 Release Notes
----------------------------------------------------

[New Features]
- A new VOR2 gauge is added to the panel. The NAV1/2 switch now only affects the DME readout.

[Animations]
0009117: Fixed: with all Failures checked Left RPM stays at idle.
0009124: Adjusted: trim via button or hat switch resolution too high.
0009614: Fixed: in exterior view open door is also showing as closed.
0009616: Fixed: No animation on OBS knob.
0009617: Fixed: ADF heading knob animation jumps around.
0009621: Fixed: Storm window animation locked when double clicked rapidly.
0009625: Fixed: Props on ground windmilling and feathering/unfeathering in certain wind conditions.

[Avionics]
0008720: Fixed: GTN instrument test does not change HSI.
0009048: Fixed: Altimeter knob moves the mb but not the HGs.
0009111: Fixed: DME failure tip code not resetting after a repair.
0009119: Fixed: ADF indicator tooltip corrupted.
0009122: Fixed: ‘ADF Card’ now uses standard variables.
0009129: Fixed: Unable to click / drag ADF rotary.
0009157: Fixed: HSI Flag not working properly in GPS mode.
0009624: Fixed: PMS50 GTN750 not driving GSI in RNAV mode.

[Electrical]
0008782: Fixed: Right alternator circuit breaker toggles left alternator breaker.
0008870: Fixed: Circuit breakers that use the MSFS style aren't restoring to a pulled state.
0008929: Fixed: Electric trim on yoke inop without battery on.
0008930: Fixed: Separate the 4 PAX overhead lights on a separate electrical bus.
0009001: Fixed: Right alternator CB not working.
0009038: Fixed: CHT and oil temp gauges inop with battery off.
0009039: Fixed: Airspeed indicator inop with battery off.
0009045: Fixed: Ammeter errors.
0009057: Fixed: Clock breaker inop.
0009058: Fixed: The Dif temp value on the JPI is displayed in °F although all other temps are in °C
0009140: Fixed: Provision needed to repair/recharge battery. (Clicking on the repair icon for the battery will now recharge it.)
0009620: Fixed: Some circuit breakers not working or not working as intended

[External Lighting]
0008732: Fixed: Exterior light emissives are too dim
0009572: Fixed: Landing light glass texture wrong sequence of illumination

[FDE]
0008928: Fixed: Excessive Glide Performance.
0008926: Fixed: Unrealistic flight characteristics in high bank situations.

[Fuel]
0009622: Fixed: Fuel Burned by Gauge does not equal Fuel removed from tanks

[General]
0008730: Fixed: Engine pump failure not implemented properly.
0008731: Fixed: Tablet and payload manager not in sync under certain conditions.
0008834: Fixed: Engine cold start delays not functional.
0008835: Fixed: State of shades not being saved/restored.
0009120: Fixed: Trim Wheel Position Indication/ inop trim wheel with battery off.
0009126: Fixed: DME range incorrectly calculated.
0009128: Fixed: NAV1/NAV2 switching issue.
0009163: Fixed: Heater cools cabin.
0009282: Fixed: Failed engine "fixes" itself after several seconds.
0009623: Fixed: Cabin Heater OVHT light.

[Internal Lighting]
0008728: Adjusted: Post lights too dim.

[User Manual]
0008724: Fixed: Cowl flap operation.
0008783: Fixed: The manual referring to the wrong engine in some places.
0009615: Fixed: Nav1/Nav2 switch operation.

[Menu Systems]
0008725: Fixed: Unable to repair right magneto.
0008869: Fixed: Brakes deteriorating at an accelerated rate.

[Model]
0008757: Fixed: Emergency gear handle clickspot adjustment.
0008759: Fixed: Hole in nose is incorrectly a light.

[Other]
0009233: Added: Saved states for ADF NAV/COM frequencies.
0009618: Fixed: Aircraft selection screen specs are a copy of the DA-62.

[Sound]
0009052: Fixed: Scrapping metal sound when ditching into water.
0009619: Fixed: Repairing a failed engine does not get rid of the broken engine sound.

[Textures]
0008760: Adjusted: Dirt layers need adjustment.
0009394: Fixed: Typo on GNS430.

I’ve been waiting for this…. Thanks!

I couldn't find the SP on their support or forums pages. Could someone post a link or point to where it is?

Its here

https://milviz.com/forum/viewforum.php?f=253

 

Thank you!

I just downloaded the C310 but same version 0.1.0, has it been released?

Edited November 10, 20223 yr by dresoccer4

5 minutes ago, dresoccer4 said:

I just downloaded the C310 but same version 0.1.0, has it been released?

You have to go to their support forum. Instructions up in this thread. 

4 minutes ago, btacon said:

You have to go to their support forum. Instructions up in this thread. 

ah, strange. i assumed they'd have updated the main download file for such an important update. but i found the thread thanks

They do things.... differently. 

2 hours ago, jpe828 said:

They do things.... differently. 

Yes like releasing it one day before the biggest sim update to date without mass testing.

No improvements to the default and not very good KAP140 Auto Pilot System then. Pity.

 A reminder to anyone that was running the JPLogistics C152 KAP140 improvement in the C310, you will need to edit the aircrafts panel.cfg again as the update replaces that file so you end up with the half-baked Asobo unit again. 

FYI, if I choose the download button in the middle of the page I get a 147MB corrupt file. If I choose the upper left download button I get the entire 1.5GB download that works.

17 hours ago, RaptyrOne said:

No improvements to the default and not very good KAP140 Auto Pilot System then. Pity.

 A reminder to anyone that was running the JPLogistics C152 KAP140 improvement in the C310, you will need to edit the aircrafts panel.cfg again as the update replaces that file so you end up with the half-baked Asobo unit again. 

There's no need to do that just download the pms50 310R WTT "package"
 

Quote

 

This package comes with a more realistic KAP140 autopilot.

- Correct display of lateral and vertical active and armed modes.
- Auto arming to target altitude when engaging AP mode (when pressing the AP button).
- Arming button works (manual arming)
- HDG to NAV arming mode
- UP/DN buttons in ALT mode allows adjusting the managed altitude (+-20feets)
- Baro sync with the main altimeter.
- GS armed for both ILS and RNAV

 

I have it set up with my Mini + Spad and works great.

19 hours ago, RaptyrOne said:

No improvements to the default and not very good KAP140 Auto Pilot System then. Pity.

 A reminder to anyone that was running the JPLogistics C152 KAP140 improvement in the C310, you will need to edit the aircrafts panel.cfg again as the update replaces that file so you end up with the half-baked Asobo unit again. 

Also noticed they didn't fix the AP apparently. Using the JPL AP didn't help me either in the past because the plane still wouldn't intercept the current vs and dive down to level flight. It seems they also didn't fix that?

I regret buying this plane. I will keep on flying the JPL C152. How can Milviz release a payware plane with a word not allowed default AP and then don't even make it work properly? This update also took way too long imho. This was my first and last Milviz purchase.

Edited November 11, 20223 yr by tup61

17 minutes ago, tup61 said:

Also noticed they didn't fix the AP apparently.

They claim that it's beyond their "scope" to fix. but somehow the pms50 WTT package fixes it.

I have a feeling that, how should I put it, that it's beyond their self-modesty to admit that they either can't or don't care to fix.

Having said that and apart from the KAP (fix) the product is solid and I'm enjoying it very much.