4 hours ago, Christopher Low said:

I guess that I must be doing something wrong, but I will have to wait and see what the JustFlight guys suggest.

You've had this on ILS approaches?

From memory the RJ doesn't have auto throttle. Does the bouncing follow manual throttle adjustments won approach to the runway>

T45

Yes, I have experienced it on ILS approaches. The Avro RJ does have an autothrottle.

Can you post a video of what it looks like?

I flew into CYYJ last night (2020) and the descent felt fine. A little bouncy but about what I'd expect from a small plane.

What are your turbulence settings at?

Turbulence is basically non existent on my flights, and the winds are very light. I prefer nice, relaxed flying

Well, this was an interesting response to my support ticket @ JustFlight.....

"This issue is currently under investigation by our development team. We believe something has happened within the System.cfg which is causing this. Hopefully a fix will become available soon, and you will receive an email about any updates to the RJ Professional".

 

I guess this must mean that other users are suffering from the same problem. The question is.....why are you guys not experiencing the same?

Edited April 1, 20251 yr by Christopher Low

1 minute ago, Christopher Low said:

The question is.....why are you guys not experiencing the same?

It may be like the arrow in the FedEx logo. Once you see it, you can't unsee it. But until you see it 🙂

Hi, no bouncing here at landing all models. Do you set airbrake out 50ft before tochdown, and also smooth reduce power to idle?
Set airbrakes out at landing is really a "must have" with the avros.
Planes will bounce at landing when speed ist to high, or descend rate to high..

The "bounce" (serious up and down pitching) has nothing whatsoever to do with landing. I have only done short test circuits at a handful of airports, and this problem is evident at several thousand feet.

Oh, sorry, I recognize a “translation problem”: In German usage, “bouncing” is only used in the aircraft as I know it when rocking up during the landing process.
what you mean as "bounce" i also see in the Maddog. The Maddog also going up and down during cruise.

For those flying the Avro RJ in MSFS2024, do you face a problem sometimes where flicking the FMC buttons requires two or three clicks to register? I started learning and flying this place 2 weeks ago and I notice sometimes that the first click does not register.
The same applies when using the WebFMC provided by AAO. It takes more than one click for the input to register.
Anyone else facing the same issue?
Thanks.

3 hours ago, xsever said:

For those flying the Avro RJ in MSFS2024, do you face a problem sometimes where flicking the FMC buttons requires two or three clicks to register? I started learning and flying this place 2 weeks ago and I notice sometimes that the first click does not register.
The same applies when using the WebFMC provided by AAO. It takes more than one click for the input to register.
Anyone else facing the same issue?
Thanks.

you posted this elsewhere already, please see my answer there

I had something similar on a few aircraft. In my case it turned out to be a sort of trim feedback loop between the aircraft and my Brunner CLS software, cured with a simple tick box selection in the Brunner software.

I appreciate you may have a different control setup. But do you have any controller software at all running between your controllers and the aircraft ? My issue occurred at every phase of flight.

It sound like you have something very similar where there is a feedback loop of some description.

1 hour ago, jon b said:

I had something similar on a few aircraft. In my case it turned out to be a sort of trim feedback loop between the aircraft and my Brunner CLS software, cured with a simple tick box selection in the Brunner software.

I appreciate you may have a different control setup. But do you have any controller software at all running between your controllers and the aircraft ? My issue occurred at every phase of flight.

It sound like you have something very similar where there is a feedback loop of some description.

Thank you for the input. The controller software I have running is MobiFlight so I can use my WINCTRL PAP3 to control the autopilot and AAO to control buttons using my Stream Deck XL. That's it.

3 hours ago, xsever said:

Thank you for the input. The controller software I have running is MobiFlight so I can use my WINCTRL PAP3 to control the autopilot and AAO to control buttons using my Stream Deck XL. That's it.

please pick 1 topic or the other. It's annoying to post the same thing in two different topics.