31 minutes ago, BU830 said:

I have a 5080

why use the mod then when the 5080 has 4x MultiFrameGen built-in already?

Edited April 5Apr 5 by turbomax

Greetings everyone 

I have seen a lot of comments  with people who do not suffer from this issue obviously this post is for the people who does and naturally as human beings if you have this issue, you would comment and try to fix if it works for you then OK if it doesn’t then that’s it..

But commenting the following like “no need for this mod” and “I couldn’t care less about this issue” and “ I don’t have this issue” 

all stem from the core problem of those who didn’t read the post and maybe stop for a minute and thought maybe I should skip instead of filling the post with comments and related to the issue and then putting words into my mouth like calling them dummies and handicap which I didn’t I simply asked for them to read the post and see if they are the target audience for this fix.. 

now, even when sharing the original thread about this issue in the MSFS forums people are still convinced that is insignificant issue.. when in fact it’s a major issue and it’s going to get worse if it didn’t get reported, but thankfully, the devs have the bug logged 

Not to mention that this issue has been brought up, although in other ways, and yet they still think that the post intended for everyone when it’s intended for a small group of people that are facing the problem.. 

READ THE POST CAREFULLY IF YOU DO NOY HAVE THIS ISSUE THIS SKIP AS IF YOU DID NOT EVEN SEE IT

This mod is a game changer from my side, because with 9800x3d, 5090 and 64 gb of ram, i wasn't able to fly without stutters 

I ve tried all i found on YouTube, Facebook without good result 

Since yesterday evening when i installed it i flown twice and that was perfect. 

Thanks 

On 4/5/2026 at 11:51 AM, turbomax said:

why use the mod then when the 5080 has 4x MultiFrameGen built-in already?

Here are some users who used this mod with a 5080 or 5090. 
But this is not answer to my question

Edited April 6Apr 6 by BU830

So does this only work in 2024? I have a 4070 ti super and only use TAA, DLSS is too blurry for me, can this be used with TAA?

2 hours ago, Danthepilot77 said:

So does this only work in 2024? I have a 4070 ti super and only use TAA, DLSS is too blurry for me, can this be used with TAA?

Well, I've done only one flight with it but that was very positive. I'm also using TAA. As I understand it, it replaces the default frame generation (among other things I don't quite understand so far), which has problems with performance getting worse over the course of the flight.

The only negative thing is, you have to set up an account for download, but it's free.

On 4/3/2026 at 10:06 AM, Aboodyking said:

 

I found a solution for this problem

After searching for over a month and a half I finally concluded that installing DLSS enabler by Nexus mods

https://www.nexusmods.com/site/mods/757

It removed the strange anomaly associated with the frame generation making your mainthread load up to the point it causes your frames to drop beyond recovery.. this issue was first observed in SU3 beta and somehow made its way to the main release and then was fixed temporarily in SU4Beta but then appeared more aggressively in main release SU4! and was fixed temporarily in the first 2 SU5 Betas and its back in SU5 beta.. it’s safe to say asobo is ignoring it and it baffles me as is to why the wouldn’t fix it.. 

I tested this for about a week and a half with multiple aircraft and multiple scenery add-ons

my testing included: 

PMDG 777 family + inibuilds a350/a340/L1011 tristar + ifly 737 max + fenix a320 family…

——

all considered to be heavy on the performance from a vram and cpu standpoint, after installing the mod somehow KJFK to EHAM and VHHH to KSFO and OMDB to LSZH and KLAS to KSEA and EGLL to EGPF became possible with performance never dropping at all a stable FPS no matter the conditions.. I simply could not believe my eyes but after a week and a half I would say that this is a great solution and a work around it, depending on your understanding of it and it could be a great thing to carry over an SU5.. 

—

installation instructions

just paste the version.dll into your content folder for MSFS 2024

—

i hope this fixes the issue for everyone it’s been a headache

Forgive me if my knowledge of graphics cards isn't quite up to snuff. Do you know if the overloading of the main thread can cause stuttering at the edges of the screen when frame gen is selected. I have a 3080 card and haven't been able to frame gen in some time now due to the side of the screen stuttering weirdly when I "turn my head" of do a walk around. Thanks in advance

I've tried this and it works.  However,  if you happen to use pop out windows - it will CTD.  

Does Alt tabbing work? Because if not, this would be a showstopper for me...

EDIT: it does work. And it is nice to have 4x FG option, but no surprise, it did not fully eliminate any stutter that is there with nVIDIA basic 2x FG. How could it, the stutters are due to CPU load spikes and they are still there even with 4x FG. They would still be there with 100x FG. But of course, they are slightly alleviated, because of the higher overall FPS slightly less noticeable. So for the moment, it is a keeper for me, lets see for how long 😉 

Edited April 6Apr 6 by AnkH

Will this work in 2020?

On 4/6/2026 at 3:51 PM, BU830 said:

Here are some users who used this mod with a 5080 or 5090. 
But this is not answer to my question

The reason for this has been explained like 3 times and the simple answer is 

asobo’s implementation in SU4 sucks.

it cause your mainthread to load up which in turn causes your fps to drastically crash this mod had the positive side effect to fix this issue.. while not primarily aimed for the 50xx or the 40xx series of cards since they have a native FG functionality 

Edited April 8Apr 8 by Aboodyking

On 4/5/2026 at 12:24 PM, BU830 said:

If I put the version.dll file in the exe folder, I can no longer select DLSS FG in MSFS. I only have FSR FG as an option. What's the problem? I have a 5080

That shouldn’t happen either you did something wrong or you used an older version i recommend version 4.3.0 or 4.3.1