Tuesday at 06:29 PM3 days Microsoft Flight Simulator ForumsAircraft & Avionics Update 05 (AAU_05) Available NowATR 42-600 / 72-600 Changelist v1.1.40 Fixed negative trim setting when skipping to takeoff (career mode). Fixed engine shutting down for certain aircraft variants when skipping to takeoff (career m Edited Tuesday at 06:30 PM3 days by MPL Mikael Leinonen
Tuesday at 07:12 PM3 days 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
Tuesday at 07:33 PM3 days 49 minutes ago, humongodongo said:So the ATR 72 still can't climb to cruise? lmfaoPosts on the MSFS forums says it's climbing better.That post doesn't have the entire changelog for some reason. The full change log is in version info page in the content manager/library.https://forums.flightsimulator.com/t/msfs2024-atr-42-600-72-600/664587/1796?u=tuskin38 Edited Tuesday at 07:40 PM3 days by Tuskin38
Tuesday at 07:54 PM3 days Change log from ATR-42/72 Aug 18 2026- Fixed negative trim setting when skipping to takeoff (career mode) (#732818)- Fixed engine shutting down for certain aircraft variants when skipping to takeoff (career mode) (#689800)- Fixed engine not starting when skipping to taxi without entering aircraft (career mode)- Fixed nose-down attitude after using Back on Track and Back to Fly- Fixed generator switch logic- Fixed fuel hose and GPU cable positioning- Fixed artifacts of STEEP APPR button in 72 cockpit- Fixed ice probe not lighting up- Fixed floating seatbelts- Fixed white lines on fuel valve and xfeed buttons- Fixed exterior lights flickering after exiting slew mode- Fixed LOD issues- Fixed GPWS fault light on when it should be off- Fixed black areas on the left sides of display unit 1 and 2- Fixed landing elevation display- Fixed NAMS panel outflow light state- Fixed EFB Route Planner import when arrival airport has an approach assigned- Added workaround for propeller brake fuel usage- Fixed display glow visible when power is off- Multiple backlighting fixes- Fixed hardware interface packet size- Fixed VNAV arming in CRZ phase- Fixed swerve before switching to MANUAL legs- Fixed MIP/PED and OVHD lights preset on flight loading- Repositioned RTC nodes in navigation_graph_passenger.cfg for VIP charter missions (for smoother walk)- Added fuel hose- Added ground power cable- Added support for simulator ground power unit- Added support for PREV/NEXT key paging on LTRL REV and VERT REV pages- Fixed issue where Radius-to-Fix legs wouldn’t be drawn- Added sim rate indicator to EFB status bar- Added sim rate controls to EFB MAINT page- Fixed door animations and interactions- Improved route drawing- Improved overfly waypoint LNAV- Fixed button highlighting in the EFB Simbrief ID window- Fixed condition levers not movable after loading a .FLT file with running engines (#708416)- Updated initial elevator trim value in .FLT files- Changed IMPORT OFP button text to be clearer about MSFS 2024 flightplan or Simbrief import- Fixed gust lock initialization- Fixed flight recorder GND CTL button always lit- Fixed AUTO TEMP/MAN TEMP exchanged on SYS BLEED page- Fixed right engine ITT exceeding 680°C with prop brake on- Added residual ITT simulation when engines are shutdown- Added mech call horn plays when OVBD valve is reset- Fixed air condition ignoring ground cross feed valve- Removed all N2 references from the engines.cfg files (not applicable to a turboprop)- Retuned 42-600 engine; performance now matches manual charts- Increased reverse thrust power for all variants to match observed real aircraft performance- Set propeller pitch moment scalar to 1.00 (recommended default)- Fixed MSFS 2024 EFB Route Planner import- Fixed FD not active (= pitch bar at 0 degrees) under certain conditions (#708402)- Fixed FD reverting to standby when AP is disengaged on the ground- Added improved visual click feedback for EFB buttons- Added improved visuals for disabled EFB buttons- Added automatic power management setting according to .FLT file- Improved VNAV path calculation- Fixed VNAV PATH arming within 5 minutes of TOD- Added CAT1 and CAT2 indication into FMA
Tuesday at 08:48 PM3 days can confirm, the ATR-72 can climb and reach cruise speed now. Edited Tuesday at 08:58 PM3 days by Tuskin38
Tuesday at 09:30 PM3 days 42 minutes ago, Tuskin38 said:can confirm, the ATR-72 can climb and reach cruise speed now.That's great news. Cheers Steve Hall
Tuesday at 09:38 PM3 days Has anyone tried this with GSX yet? When trying to load aircraft with GSX my cargo and rear pax door opens and closes (flaps) repeatedly. If you load and go without GSX everything works just fine, for me at least. Anyone else? TIA,-B
Tuesday at 10:04 PM3 days Looks like the FF/LL Curtiss C46 and Boeing 307 which were originally Airplane Heaven models have been taken over by Inibuilds Edited Tuesday at 10:05 PM3 days by Matchstick
Tuesday at 10:16 PM3 days Is the prop brake bug fixed? 5800X3D. 32 GB RAM. 1TB SATA SSD. 3TB HDD. RX 9070XT.
Tuesday at 10:19 PM3 days 39 minutes ago, btacon said:Has anyone tried this with GSX yet? When trying to load aircraft with GSX my cargo and rear pax door opens and closes (flaps) repeatedly. If you load and go without GSX everything works just fine, for me at least. Anyone else? TIA,-Bsame here, the update must have changed how GSX checks for open doors.I just edited the profile to remove the open/closed door check and just manually controlled them via the ATR EFB Edited Tuesday at 10:21 PM3 days by Tuskin38
Wednesday at 01:42 AM3 days Can't find the ATR in career mode. Is it still not available ?? (PC)Achim Edited Wednesday at 01:43 AM3 days by fl95
Wednesday at 07:37 AM2 days Is the prop brake bug fixed?yes, I flew a VNY-SEA sector yesterday and everything worked as expected. Ramon De Valencia AMD 9950X3D / 64GB DDR5 6000MHz / RTX 5090 / 1200 watt PSU MSFS 2020 and 2024
Create an account or sign in to comment