RobbSpeed

Aerosoft airports not specifically released for P3Dv2 have the problem. Read this post carefully from start to finish. It will put you in the right direction if you decide having the lights is worth it to you. Best regards.

Very impressive what the PMDG team has accomplished. Congratulations and thanks for all of your hard work. Time for me to pick up the P3D 300ER from the shop :smile:

Hey Gérard, Thoughts out to you and country as you face difficult times. I experience the exact same issues you are having with the trim. It was good to see RSR acknowledge it. Hopefully the soon released fix will help us out. Cheers.

Thanks so much for confirming this. Looking forward to the update.

Still didn't get over to the Orbx site, I guess. So far, I have gathered that you have Vector, which got deleted. You updated FTX Global, which means you've had prior versions, and you have PNW. I have those three products, amongst others, and nothing has been deleted when I run updates. So again, my suggestion would be to reinstall what got deleted, or create a new topic in the Orbx support forum on their site. They are very cool over there and will help you to the end, as long as you show them proof of purchase. My curiosity is satisfied. I do hope you get it solved.

You can tell I'm not a frequent poster but this has my curiosity for some odd reason. To be clear... What did you buy last week? And what exactly got deleted? My only suggestion would be reinstall whatever got deleted. However, as stated previously, you will get more definitive answers from the Orbx forums on their own site. I would link it here but I'm not sure if that's allowed.

I haven't been on the Orbx forums lately. So I don't know if you posted there as of yet... But you're more likely to find quicker answers there, provided you have your proof of purchases ready.

+1 I'll admit I was confused on the wording, too. In the end, don't think about the 3hour limit too much. If you're P3D only, then get only the P3D version (pro, academic, etc). I did that and got my rebate in under 30 minutes. If you're sticking with fsx in addition to p3d, then get the bundle and choose the $30 rebate option. The process was so smooth... I'll buy the Cherokee when it is released, just because I want A2A to have my full support now.

Yes, it has the ability to speed up the fsx atc voice sets... If that's your question, it works perfectly.

You have to edit any rte files that departs from EHAM. Open the rte with notepad. Near the top there will be two values associated with EHAM saying -11. Just edit so that the - isn't there. I just make it 11, but I guess any number higher than 0 will do.

+1,000,000

Better to post this on the PFPX forums at Aerosoft. I don't have it in front of me but PFPX has two export options for PMDG. The PMDG simulations option will result with rt2. If you select PMDG simulations NGX, then it will be rte.

https://pilotweb.nas.faa.gov/common/nat.html

So your problem is solved then. Cool.

Read the manual. And by chance you did read it, you missed the part where it tells you can click and hold the Menu button on the CDU and that will bring up the FS Actions where you can connect external power.

Load the cold and dark. Power it up, delete the ILS entry, shut it down. Save that panel state. And define the new panel as your start-up.

Nice job, Elliot!

No user here is going to be able to help your issue. If you're constantly getting activation errors, you need to submit a ticket request at the pmdg website and have your purchase info ready.

Load cold-dark... On the cdu, click and hold the Menu button. FS Actions, connect your power. PMDG Setup, save a new panel state. Make that new panel state to be your start-up. Done.

This post is about your upcoming family addition. First, I offer you congrats on that aspect. Since you wrote it, you can make a case it is about the 777 because you use the word 'release'. I see it is as you and gf arguing about finances. Those are two opinions that don't really matter. The mods made a decision and it is their house where they can make that decision. The PMDG forum is full of useless posts. Yours got targeted. Deal with it. Making a new post there to address this one won't help, as you have probably seen by now. I've lasted 10 years here on less than 100 posts because I know how to search and can keep my opinion to myself amongst members who have an absolute need to be right and heard. But tonight I have lost... Lol A serious congrats again on your coming baby. That's a life changer for sure. Good luck! Rob Sent from my iPad using Tapatalk HD

That was the trick! The reflections... Embarrassed that I skipped over that small detail. Thanks! Sent from my iPad using Tapatalk HD

Hey Bert, I thought my knowledge on gauge edits had improved but I'm stumped. I haven't flown the C90 in a while but recently installed it again and applied your xml tweaks which make it possible to select HDG and CRS changes on the EHSI. I edited the B200 panel.cfg to use the C90 EHSI guage but I'm not able to change the HDG or CRS in the same manner. I don't fly in 2D or use any pop-ups, so many of your edits for Carenado stuff, I only actually make changes to the VC sections. So in this case, the original B200 is: [Vcockpit05] Background_color=0,0,0 size_mm=1024,1024 visible=0 pixel_size=1024,1024 texture=$Panel_5 gauge00=EX500_B200!EX500_config, 0, 0, 1, 1 gauge01=EX500_B200!EX500_3D, 0,512, 513, 411 gauge02=B200KA!ToggleCARG500, 64,512, 448, 64 gauge03=EFISB200!EFIS_3D, 0, 0, 512,512 gauge04=GAUGEB200EFIS!Gauge_EFIS84_EHSI_3D, 512, 0, 512,512 gauge05=B200KA!ToggleEFIS, 0, 0, 512, 512 gauge06=B200KA!ToggleAUTOPILOT, 512, 0, 512, 512 gauge07=GAUGEB200!Gauge_VSI_DIGITAL, 514, 513, 320,320 gauge08=B200KA!ToggleAUTOPILOT, 515, 513, 64, 64 and I have edited it to: [Vcockpit05] Background_color=0,0,0 size_mm=1024,1024 visible=0 pixel_size=1024,1024 texture=$Panel_5 gauge00=EX500_B200!EX500_config, 0, 0, 1, 1 gauge01=EX500_B200!EX500_3D, 0,512, 513, 411 //gauge02=B200KA!ToggleCARG500, 64,512, 448, 64 gauge03=EFISB200!EFIS_3D, 0, 0, 512,512 gauge04=GAUGEC90EFIS!Gauge_EFIS84_EHSI_3D, 512, 0, 512,512 //gauge05=B200KA!ToggleEFIS, 0, 0, 512, 512 //gauge06=B200KA!ToggleAUTOPILOT, 512, 0, 512, 512 gauge07=GAUGEB200!Gauge_VSI_DIGITAL, 514, 513, 320,320 //gauge08=B200KA!ToggleAUTOPILOT, 515, 513, 64, 64 In gauge03, I also tried to use the C90 EFIS but neither option works. I get no click spots when trying to adjust the heading or course. I disabled "//" the toggles in the 2D sections just to be sure. It works correct when I'm the the C90 but not in the B200. Any thoughts? Thanks!

Thanks again for your help!

Thanks for the lighting edits. Will give it a try shortly. I noticed you added the gma340 comm. I wondered silently how come you didn't put it in the first time. But that was an easy entry when I was entering your other RXP edits. Today was the first time using the STEC. Took a bit to get the hang of it but now I'm in love hahaha... The F33 is now my favorite single engine; thanks to your efforts. Sent from my iPad using Tapatalk HD I studied your pic closer. I see now how you placed the fuel flow gauge in higher view. So yes, if you don't mind sharing the code, I will be in debt to you. Sent from my iPad using Tapatalk HD

It certainly helped me out. Just wanted to say thanks!