simbio

I will buy it instantly as I miss ready for pushback, but quality speaking the external model and also the cockpit is not at today standard IHMO. But flying VOR and INS need more concentration on flying skills then enjoy graphic detail.

since fs9 things as change on a small detail. First you need the sdk of fsx you can find on gold release or a friend 😂 The sdk brings proper shader for fsx so you must use it on material panel. You need to create the x file from max using the sdk plugin then create the mdl and final the bgl. So on the folder of the plugin open cmd XTOMDL NAME.X /XMLSAMPLE you will get and name.mdl and name.xml on the xml write latitude an longitude https://www.fsdeveloper.com/wiki/index.php?title=XtoMDL then BGLCOMP NAME.XML then you will have the bgl to place on scenery folder . On fsdeveloper there is a tool call MCX that can do all the work for you. https://www.fsdeveloper.com/forum/resources/modelconverterx.92/ If you need help just pm me! have fun

Me toooooooo even IXEG 733 did not take so long! I believe that we will see Airfoil in XP11 platform before Milviz! check this out https://www.airfoillabs.com/

I try to update CYYZ but got a message "installer integrity check has failed" http://www.flytampa.org/forum5745/viewtopic.php?p=60622#p60622

Look, 04R is used for takeoff this explains the lacks of DME info check always charts, normally runway 04L got DME reading for landing same for the opposite runway.

Sorry, Is this is the video you are talking about?

Take this as an opinion for what I have learned, I am not a pilot. Orbit is used in GA and in VFR condition and is normally a circle within the airport area over reporting point or in downwind phase. With a 737 it's mandatory to use holding procedure but you train to do circuit pattern by following Flight crew training Manual that came with the documentation from PMDG. I never heard of a 737 flying in VFR procedure but only on visual for circuit pattern or landing. Here the step for touch & go landings. Atc will instruct you to maintain speed just for separation but once you are cleared for visual or ILS you stick with procedure speed as flap step requirement.

Hi Is there a tool that can broadcast user flight so we can see is landing rate and deviation from localizer for a virtual school. I imagine a tool that needs to be installed and can send to a web browser the behave of multiple pilots. Thank's

I love this message

And me on the list using Activesky on same PC. It happen after the updating to last version and I reistalled it from scratch, it works fine for some time but then came windows update that trigger back with this annoing error. Lately with PMDG going freezed and Activesky with this error you are hour to fix install etc. Do they have betatester? becuse apparently we are the only one with this error.

If you already been working with photoshop you are familiar to paint I would imagine. So to create an alpha channel is like painting, or make gradient but in gray style, where withe show the material and black hide. Let's says you select a portion of image that shows the shiny and the rest will be matt, from the selection menu you save as mask. On channel tab you will see RGB channel if you saved a mask you will see anothe channel call Alpha1. here a tube that explain what is an alpha channel

For me since this update, nothing works, now even after reinstall upon downloaded. The other aircraft like the 777 and the 737 are fine. night

The 747-8F was working fine in 4.3, I disable the antivirus proceded with OC to update. Upon lunch P3d the -8F didn't shows the landing gear and all the panel completly freezed, then I did another update that came for the rain effect. Same situation after the update. So need to reinstall everithing from scratch, can't imagine how much I love this.

Nope I will try next time. Thank for your imput and everybody who help.

I enjoy a lot, flying from EHAM-HECA HECA-HKJK and now back to EHAM A nice VA for Heavy cargo https://virtualcargo.international/

Today no more red line, here an image about what was like

ok, but this is my second flight with this state, need I to send to a check?

It's the second flight, that I have this red line on N1 value, but can't find a a solution. On the QRH I find the condition but not the solution on page 173. Any advice?

Users of the original version will be pleased to know this is a free upgrade and the original serial will work

Hope this help Unfortunately is the way that is loaded in P3D and FT install in old method using scenery.cfg, I had problem myself If you have orbx it can happen as the scenery method sometime conflict with XML method. Set with the control panel ADEX_FLYTAMPA_EHAM_2016_ALLRWYSOPEN.bgl all runway in use. Try to use AddonOrganizer_P3D_V4 from lorby and move from scenery to addon.xml method. Or use the code below in a xml file and manually place in Documents\Prepar3D v4 Add-ons\Flytampa folder respect that order. Don't forget to remove in C:\ProgramData\Lockheed Martin\Prepar3D v4\scenery.cfg. <AddOn.Component> <Category>Scenery</Category> <Path>x:\FlyTampa\Amsterdam_LC</Path> <Name>EHAM Amsterdam Schiphol - Landclass</Name> <Layer>253</Layer> </AddOn.Component> <AddOn.Component> <Category>Scenery</Category> <Path>x:\FlyTampa\Amsterdam</Path> <Name>EHAM Amsterdam Schiphol - Airport</Name> <Layer>255</Layer> </AddOn.Component> This one should be there. C:\Program Files\Lockheed Martin\Prepar3D v4\Scenery\World\scenery AFX_EHAM_flytampa_dummy.bgl

This is mean that there is an addon that isn't compatible maybe FSlabs. I advice to disable any AddonXML in documents folder inside Prepar3D v4 Add-ons. Then one by one reinstall them check wich one doesn't work! By the way, you can't pretend that all will works at first as long as you use vanilla installation, this time it will take time before to catch up with this new version. It will take more time then going from 32 bit to 64bit

It's strange that they don't delight us with some screenshot in PBR style!

I have an M.2 ssd as a boot drive and want to clone over a new larger one's. Is there any trouble in doing so, can I use the software from Samsung as the ssd are the same 970 Evo m.2 ? Any experience and advice?

Thank you for share this work, for better and easy implementation I would create two or three field with a puch button to choose the UTLand FLAI folder to eliminate the editing of jason file for noob people. In my side the test works weell I injected some 747 cargo complately missing from UTL I also add this for airframe selection where I know that Flai have some MD11 cargo repaint { "UtlCode": "M11", "AiCode": "MD11", "SearchIn": "FLai;MISC" }, { "UtlCode": "M1F", "AiCode": "MD11", "SearchIn": "FLai;MISC" }, But unfortunately it didn't give me any new replacement On the result of repaint no FLAI mention on the repaint.xml just the dedalus <repaint_fleet> <equip>M11</equip> <car>SBO</car> <oper>SBO</oper> <vis> <repaint_visual> <title>UTLive_M11_Daedalus</title> <val>100</val> <useOnce>false</useOnce> </repaint_visual> </vis> </repaint_fleet>. Any hint how can I fix that ?

I open quite frequently p3d and the Immersion Manager windows pop even if i don't use the 747. Is it possible to close it for good and be opened only when we need it? thank's