denny

after update 1880 the options across top left in sim no longer appear things like dev fps choices debug etc just not there any more , cannot get to any of those options cannot get a fps counter anyone else having this issue or is it being caused by the update not loading right on my computer

when usuing 2 monitors and changing the views on the second monitor in 2020 you could see the changes as you made them now on 2024 it is gues work because you cannot see the changes as you make but requires you to do over and over in the ad vanced settings

in 2020 running 2 monitors you go to experimental and add your new window on thw second monitor. then your choices are lateral,vertical,and roll to change the views on the second monitor and as you change them you can see the changes as you do them . but in 2024 that second monitor does not come back for viewing as you change the options , so you have to guess at changes over and over to get a perfect view on the second monitor

in 2020 running 2 monitors you go to experimental and add your new window on thw second monitor. then your choices are lateral,vertical,and roll to change the views on the second monitor and as you change them you can see the changes as you do them . but in 2024 that second monitor does not come back for viewing as you change the options , so you have to guess at changes over and over to get a perfect view on the second monitor

when usuing 2 monitors and changing the views on the second monitor in 2020 you could see the changes as you made them now on 2024 it is gues work because you cannot see the changes as you make but requires you to do over and over in the ad vanced settings

done will check when comes out

after last msfs2024 update. My alpha yoke settings no longer work correctly. I changed nothing. still usuing control setting i setup 9 months ago and never had control setting problems until after last update. anyone else , and dont really want to redo,as it took hours to do 9 months ago. Any help appreicated.

problem has been corrected flying at 2700 alt and leaving kdca now gettinh 80fps great job carenado

dont have internet problems iget 1300mps .have you tried flying this plane in msfs2040 all other planes great some even 120 fps with frame generation and a 4080super and a 7800x3d

is so bad on fps it will not fly. i have atop of the line computer and at quality setting usually get 50 to 60 fps with dakota i get 7 to 10 something is not right with this plane

su16 will not automatic load when i start when sim comes up my version is still 1.38.2 not 1.39.2 first time has not updated to newest update automaticly

i use both 2020 and 2024. does anyone know how to use the logitech guages in the2024 version . i own 8 of their guages but none work in the 2024 version . thanks for any help.

as of this am fs2040 takes 3 to 4 minutes to connect to my departure location initial loading for cloud is about 1 minute,and now all my control panel option for yoke and throttle have been set to the default and i cant fly any aircraft until i redo my control options. i am usuing the beta. it will take me at least 40 minutes to reset my controllers which are honeycomb yoke and throttles. this was fine until this am . i have been flying the 2040 after taking over a hour to set up initial controller options which now are gone, anyone else having these problems . i do still have 2020 on my computer which flys really good . i am so upset because when 2040 version works i love it. my internet speed is 12 to 13 hundreds mps , so i know that is not the issue

my cpu is amd 78003d video card is 4080 super resolution 4k on 2 65 inch tvs running frame generation in msfs2020 gpu 99% cpu 23% fps 50 to 51 flying at 6000 altitude over newcastle klig airport delaware. Love msfs2020. have msfs2024 also but it does not compare to this

all control settings are saved as a new master . sometimes it works and sometimes it reverts back to the default settings . have set to use in all planes. hoped msoft had corrected this with latest update

Please repair or if anyone can help everytime i set up controls and change to the sim my controls will not stay where i saved them

did not purchase 2024 no problems with 2020 until just 10 minutes ago when hit msfs2020 exe ,will not run and took me to need update and is now downloading 133 gbs but all files all folders have everything still showing in them ,including community and all other folders my exe is in e drive windows apps / "E:\WindowsApps\Microsoft.FlightSimulator_1.38.2.0_x64__8wekyb3d8bbwe" . this must have been caused by microsoft. will have to wait until the entire installation manager finishes downloading to see if my 2020 will run. i have the premium deluxe 2020 version and bought it the first day it came out, and this is first time in four tears i have been forced to download the entire sim again. my system is top of the line amd 7800x3d 4080super 64 gb ddr500 ram ,4ssd 1tb drives and my download speeds are 900 to 1200 . just have to wait but do have a fast download .microsoft needs to get their act together for sure . was planning on getting 2024 version but if i do, it wont be until next year. have been usuing flightsims for over 25 years and all versions including xplane . but never any problems before . have always updated hardware to what is needed in the past. simis run on 3 65 inch tvs and great frame rates . long comments but i hope microsoft somehow sees mine and others comments . thanks for hearing mt comments

i think folks who fly the big commercialr jets would have a hard time getting the results i have in small general aircraft. Few times i flew big jets my fps were way lower in the low 30s or high 20s but i do love that 7800x3d cpu and my motherboard is the asus 670e. I never overclock any ram or cpu i run 64gb gddr6 ram

Dont often post but monitor avism every day. been simming for 29 years. Went from a intel CPU to a 7800x3d and a 4080ti run on 60 mhz 3 screens 55inch samsung tvs at 3840x2160 resolution with all settings at ultra except level of detail at 300 and frame generation on dx12 dlss performance super resolution with bravo yoke and throttle and logitech rudder pedals. Have general options experimental main cockpit and left view from cockpit and right view from cockpit. Fly only general aircraft flightsim,carenado, justflight and aircraft included in msfs at 3000 to 5000 altitude most times. At large airports like klga,sanfrancisco, klax and ksea, get 32 to 49 fps and small airports like frederick md. norfolk va.and all over the east coast i get 65 to 80 fps. This is not meant to be bragging i have worked very hard to get these results in msfs but never used the amd cpus over the past 29 years but this 7800x3d in my research showed best performance in msfs and it shows in my results with proper tuning this performance is possible Dennis

do you use a receiver for your sound or the sound from the tv. I use a separate receiver and when the receiver went bad , I had the problem you are describing. Does not seem like a tv problem . try all tv connections and test all other devices connected to tv. Again I repeat run a direct hdmi from your computer to a direct hdmi on tv in several different hdmi connectios on tv. my Samsung has 3 hdmi connections on back ,try all of yours. Hope that helps . Dennis

I have a 65 inch Samsung . You might try a different Hdmi connection on rear of tv. Have found this is needed sometimes . How many choices for connection do you have.

clutch please advise how woai install in p3dv3. Have used in past but do not no how install into p3dv3. thanks ,denny

For Saitek panels to run in p3dv3.1 in windows 10 had to download a old panel driver 70471x64 . All the newest drivers would not work well with windows 10. .

None of the small Flight instrument panels can I get to work in pdv3.1 and windows 10. Have downloaded beta drivers for windows 10 but no go . The other Saitek , switch, multi, gauge , yoke ,and throttle all work good . IT seems the new emx and 1024 in direct output are not correct . Anyone have a solution ,please advise.

location is correct , but when clicked on the update will not allow to go there. just get the following error message runtime error '75': Path file access error then Please check the FSCDBMFS*. log file program will now abort Have tried everything I know . Guess will have to contact FSC website for help. As stated in last post ,been using fsc for years but cant solve this. Thanks for trying to help Denny