MichaelMoe

Thanks. Maybe rather a everybody know post but I was thinking that if temp rises it clearly had some impact on the performance in P3DV4. If they optimised it for all cores including virtuals it should be down that road I was focusing.Maybee I need to lower some cores but I could benefit from it perhaps using more cores Thanks Michael Moe

I also getting the kernelbase. dll error with this great bird after 2-3 hours. Maybe it is Vpilot? Thanks Michael Moe

Hmm. I think it is resolved. Thanks Michael Moe

I am using Ultimate Traffic II with latest schedule update . Works fine Michael Moe

Try DX10 and steves DX10 Fixer. Michael Moe

Just a quick update. I have tested alot with Usepools=1 and poolsize=10000000 and the sim is smooth but for some reason FPS do drop around big cities like Rome and New york (FTXG+FSDT). No artifacts or black sqaures and FPS between 23-45 fps in the Lancair over Rome with Dense settings and clouds with thunderstorms occasionally. I am not sure what size this pool should be. Best was Usepools=0 i guess but whats the benefit lowering/increasing the poolsize? When i use Usepools=0 and locked the FPS the sim really isnt smooth so i will proberly stick to the above. Anyone else using Usepools=1 ? Michael Moe

My PFD/ND looks bad with low resolution when doing this (i am running 1900x1200) But increases FPS in OMDB from 45 to 54fps Michael Moe

Hi, I have issues with my throttletek during Takeoff ,TO/GA , FLCH where the throttle has its own life making it not so much fun to use. I have no issues with the NGX and only use FSX internal controls for calibrating and assigning the axis. When using FSUIPC for calibrating the axis i get CTD when i use the NGX and it still does not perform well in the T7. I know there is some forums on setting it up in FSUIPC to overcome these issues and i have taken that part about calibrating the axis in there. Plug and pray ? :-) Btw. Is it correct (normal) that A/T can re-engage itself during Approach? (I have not read the FCOM yet ,sorry) Michael Moe

Tweak tweak , thanks :-) Michael Moe

Why is it always that i get COUATL.EXE expected an error in the engine everytime i try install RadeonPro? It also says its not up to date but it is. I cannot continue because the popupkeeps coming every second when loading the aircraft :-) so i have to unstall RadeonPro and every thing is fine again Michael Moe

+1 Michael Moe

Hi, I was taking a trip from HongKong to Tokyo (VHHH-RJTT( and about 2.5 - three hours in the flight i was getting these artifacts with very very bad scrambled textures. Same thing happened after 3 hours during a EGLL-OMDB. The strange thing is that it´s occurring over water in FL390 were the "load" is pretty much low. I dont see this in heavy scenery (for now). Might be overclocking issue or RAM? The temp on the GPU is about 55-63c and 70-75c on the CPU (i7-4770k) Anyway saving the flight and just restart FSX and there is no problems. Heck the flight seems smoother anyway after this reload. Michael Moe

Is it correct that you have 3840x1080 but only 1280x720 on 0.1 and 0.2 ?? should this be 1280x1080? Michael Moe

Can you show your settings in RadeonPro.and in CCC? I have not installed it yet but is considering it. Another thing I had some problems with scenerys (EKCH) that would include CITY area and then on top of that FTXG. This would conflict but having reduced Autogen and trees pr cell to 1500 in fsx.cfg did the trick for me . Love DX10 :-)

Thanks for the reply - maybe i forgot to mention that its in the cloud layer (not on ground) when in climb over clouds i see these step which is not smooth but really in stages . I did have the line in my FSX.cfg. Maybe its REX handling who is to blame ?. DX10 optimized is also enabled in REX+ hmm Michael Moe

holy wow Alain. What is your water setup (REX and FSX settings ) ? Michael Moe

Might have been discussed elsewhere but there is a rather obvious issue when these transitions occure . It is in step and not very smooth at all. Is this also fixed with the DX10 Fixer ? Michael Moe

Thanks - Did not know that - how ever you know when your washer has a build in heater and something gets screwed ? :rolleyes: You loose and your wife starts to send you washing your clothes. Sometimes mixing things is not so good....ha ha Michael Moe

EZDOK is a must have . You can EVEN have a cinematic flow between your camera setups by for instance hitting the 1-9 on your keyboard and even the camera cinematic speed is adjustable. After learning it takes me 3 minutes to setup 15 cameras with this piece of software. Michael Moe

+1 and deaccelerate thrust after AGL800 A/P ON AT ON- and selecting FLCH 210 with Altitude FL100 coming from about 190knots no speed restrictions Michael Moe

Michael Moe

Sorry i dont have the solution but i have the same issue in DX9 with an ATI HD7970. NO AA what so ever. Thank god its soon all over with the DX10 Fixer. Hope you find the solution Michael Moee

Just a little heads up to my artifacts. I dont know why but my resolution in fsx.cfg did not match one of my LCD´s (for my FMC by CDUII) with actually windows setting. After correcting this to match windows resolution i am so far stable. Michael Moe

Hi Poul how did you port over the Leonardo Maddog to DX10 ? :huh: Thanks Michael

well it only takes a look in the PMDG NGX manual to realise they do know this common issues with FSX and sound so maybe some more qualified people would give a common on this ?. You know the thing in cold and dark were you would switch from outside view to inside VC would give you 100% engine sound or simular situation. Maybe this guy has found a solution to that in FSX thats all.... Michael Moe