February 20, 201610 yr I checked in my P3D.cfg to make sure UT2 Aircraft is in [Main] SimObjectPaths - it is as .1. I made sure of that I am reasonably certain that this needs to be .0 I seem to remember having to manually change it in my own Prepar3d.cfg file. Christopher Low AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme UK2000 Beta Tester
February 20, 201610 yr I have taken control of Chucks computer and didnt blow it up - its all set hes up and running Rich Sennett
February 20, 201610 yr I apologize for the various nm's, etc.. on the posts. Rich was kind enough to connect remotely to my machine. What he found was that the migration tool needs to stay enabled for the UT shortcut/manager to work. I had been disabling it immediately after the install of UT2. That seems to have been the problem. A big thanks to everyone, and Rich especially, for working with me to figure it out.
March 6, 201610 yr There was me thinking that I had eventually put to bed, my UT2 installation into P3Dv3.1 woes and indeed all worked splendidly for a week or so, until suddenly, no traffic on one P3D start up. I quit P3D, opened the UT traffic program to be faced with "Error loading default UT2 or FSX settings", There are multiple root elements, Line 11, position 2". Whilst I can open the UT2 interface, I'm not getting traffic. I have uninstalled, reinstalled UT2 several times, using the Estonia Migration Tool. I have checked and doubled checked the procedure that I'd used successfully, including all naming conventions (see page 5 of this topic) without success. Any ideas anyone? I'm going nuts!! Windows 10 (x64) Intel Core i7-7700K - 8.00G NVIDIA GeForce GT 1080ti NVIDIA GeForce GTX 970 2 x Iiyama 23" + 3 x NEC 27" Monitors Flight sim from AlpineSystems Prepar3D v4 ORBX PMDG737 PMDG777 ActiveSky REX A2A Cessna 172 Pro-ATC
March 6, 201610 yr There was me thinking that I had eventually put to bed, my UT2 installation into P3Dv3.1 woes and indeed all worked splendidly for a week or so, until suddenly, no traffic on one P3D start up. I quit P3D, opened the UT traffic program to be faced with "Error loading default UT2 or FSX settings", There are multiple root elements, Line 11, position 2". Whilst I can open the UT2 interface, I'm not getting traffic. I have uninstalled, reinstalled UT2 several times, using the Estonia Migration Tool. I have checked and doubled checked the procedure that I'd used successfully, including all naming conventions (see page 5 of this topic) without success. Any ideas anyone? I'm going nuts!! Ah yes that because you didnt have EMT enabled it will not work if its not thats reason or all of the problems you had - keep in mind you have to set traffic density in ut2 gui - you cant do it in p3d - keep it enabled all the time unless you are installing a native p3d program then re-enable as yo can forget and have this problem you speak of Rich Sennett
March 6, 201610 yr Thank you Richard. I did indeed have EMT enabled, but didn't set the traffic density in UT2. However, having checked, it seems to be set at 100% by default. Still no joy though. For the life of me I cannot see what on earth I could have done. One thing I didn't mention in my earlier post is that I got so frustrated, I uninstalled everything, cleaned the registry etc, so I'm starting with an effectively new PC (I only use it for P3D). I reinstalled P3D (no weather/rex/orbx etc.. etc..), then UT2, but I'm getting the same issue. Windows 10 (x64) Intel Core i7-7700K - 8.00G NVIDIA GeForce GT 1080ti NVIDIA GeForce GTX 970 2 x Iiyama 23" + 3 x NEC 27" Monitors Flight sim from AlpineSystems Prepar3D v4 ORBX PMDG737 PMDG777 ActiveSky REX A2A Cessna 172 Pro-ATC
March 6, 201610 yr Thank you Richard. I did indeed have EMT enabled, but didn't set the traffic density in UT2. However, having checked, it seems to be set at 100% by default. Still no joy though. For the life of me I cannot see what on earth I could have done. One thing I didn't mention in my earlier post is that I got so frustrated, I uninstalled everything, cleaned the registry etc, so I'm starting with an effectively new PC (I only use it for P3D). I reinstalled P3D (no weather/rex/orbx etc.. etc..), then UT2, but I'm getting the same issue. Stupid question you are using the latest developer version from site its the last one down on that webpage ? You still getting that Error message after new install of sim ? Did you apply the schedule date - also did you turn down ai sliders in ut2 gui maybe it needs to be changed to something else for it to take Is the ut2 menu in your addons pull down menu in P3D ? Rich Sennett
March 6, 201610 yr Did you link back up your Simobjects.cfg In ProgrmaData Hello Elaine, thanks.. Yes, I have this entry: Active=True Path=SimObjects\UT2 Aircraft Required=True Stupid question you are using the latest developer version from site its the last one down on that webpage ? You still getting that Error message after new install of sim ? Did you apply the schedule date - also did you turn down ai sliders in ut2 gui maybe it needs to be changed to something else for it to take Is the ut2 menu in your addons pull down menu in P3D ? I didn't use the developer version of EMT, although I believe that I have the latest version - 3.0.3. 1000 ?? Yes, same error as before Yes, I applied the schedule date and turned the sliders down after I checked it earlier No, the UT2 menu does not appear in P3D addons Windows 10 (x64) Intel Core i7-7700K - 8.00G NVIDIA GeForce GT 1080ti NVIDIA GeForce GTX 970 2 x Iiyama 23" + 3 x NEC 27" Monitors Flight sim from AlpineSystems Prepar3D v4 ORBX PMDG737 PMDG777 ActiveSky REX A2A Cessna 172 Pro-ATC
March 6, 201610 yr Do you have the following entry in the [MAIN] section of your Prepar3d.cfg file? SimObjectPaths.0=SimObjects\UT2 Aircraft Christopher Low AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme UK2000 Beta Tester
March 6, 201610 yr And i take it you have checked to verify that the Aircraft Installed Ok into your Prepar3D Simobjects folder should be around 101 I think
March 6, 201610 yr Hello Elaine, thanks.. Yes, I have this entry: Active=True Path=SimObjects\UT2 Aircraft Required=True I didn't use the developer version of EMT, although I believe that I have the latest version - 3.0.3. 1000 ?? Yes, same error as before Yes, I applied the schedule date and turned the sliders down after I checked it earlier No, the UT2 menu does not appear in P3D addons You have to use that version or it will not work - it has more capability than the one you listed Last link down thats why its not working http://www.flightsim.ee/products/migration-tool#download I suggest you uninstall UT2 and EMT and start fresh - not sim just these two programs and you will be fine Disable tool before uninstalling - important Also tool must be enabled and open on desktop while installing UT2 or any other program you need to install Rich Sennett
March 6, 201610 yr Do you have the following entry in the [MAIN] section of your Prepar3d.cfg file? SimObjectPaths.0=SimObjects\UT2 Aircraft Hi Christopher, I added that line, but it's set at 1, not 0 - I'll change it and see what happens. You have to use that version or it will not work - it has more capability than the one you listed Last link down thats why its not working http://www.flightsim.ee/products/migration-tool#download I suggest you uninstall UT2 and EMT and start fresh - not sim just these two programs and you will be fine Disable tool before uninstalling - important Great! Thanks Richard. I'll do that and let you know (I'll also look out for the entry in MAIN (SimObjectPaths.0=SimObjects\UT2 Aircraft) and check the setting) Windows 10 (x64) Intel Core i7-7700K - 8.00G NVIDIA GeForce GT 1080ti NVIDIA GeForce GTX 970 2 x Iiyama 23" + 3 x NEC 27" Monitors Flight sim from AlpineSystems Prepar3D v4 ORBX PMDG737 PMDG777 ActiveSky REX A2A Cessna 172 Pro-ATC
March 6, 201610 yr I am reasonably certain that it is supposed to be "0". Christopher Low AMD Ryzen 7 9800X3D CPU / 64GB DDR5-6000 RAM / 12GB Nvidia RTX 4070 Super GPU / Gigabyte X870E Aorus Elite Wifi 7 / 1+2TB Samsung Evo Plus M2 Nvme UK2000 Beta Tester
Archived
This topic is now archived and is closed to further replies.