November 5, 201510 yr Do you make some changes to Prepar3D.cfg? Swap wait timeout should help, but in case of my rig it is opposite, when I try it I get stutters about 1-2s period as you. I remove it from cfg solved my problem. i7-8700k, RTX2070 Super, custom water cooling, 32GB RAM, 6TB SSD spacePrepar3D v4, X-Plane 11, 40" 4k TVRex, Active Sky, RealAir and A2A pilot, GTN, ORBX mostly everywhere
November 5, 201510 yr +1 . i almost forgot why i dont use EFB anymore . This was the reason Michael Moe Seems that I got efb and v3 along with the ngx running smoothly now (3 full flights). Only simconnnect version installed is the one from the FSX SP2 folder that ships with p3d. This is win10 with also fs2crew running. Furthermore I have vpilot and asnext running networked over simconnnect... It's all good... Martin Jensen
November 7, 201510 yr I had regular stutters in both FSX and P3Dv2.4 Tried all sorts of cfg tweaks, nothing worked. Then I turned off 'autosave' in FSUIPC and hey presto, no more stutters. So yes, something going on in the background.
November 10, 201510 yr Author Do you make some changes to Prepar3D.cfg? Swap wait timeout should help, but in case of my rig it is opposite, when I try it I get stutters about 1-2s period as you. I remove it from cfg solved my problem. Swap wait timeout in or out same prob
November 11, 201510 yr Another idea...try turning down the special effects detail and distance sliders. I ran into big trouble with stutters after installing my EU sceneries...reducing both sliders from high to medium cleared it all up like magic. Regards/good luck Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
November 15, 201510 yr Author Another idea...try turning down the special effects detail and distance sliders. I ran into big trouble with stutters after installing my EU sceneries...reducing both sliders from high to medium cleared it all up like magic. Regards/good luck tried that also. my gut is telling me it's my HDD...may need to upgrade to SSD idk
November 15, 201510 yr I have p3d installed on an ssd and I have the same vc stutters as long as I am using the 4 SGSS in NVI. Removing it makes the sim run smooth at the trade of poor image quality (AA). In my case, I find that the 4SGSS has greater performance impact in P3D v3 than in 2.5. Dragos I9-13900K/ Gigabyte RTX 4090 Gaming OC/ Aorus Master Z790/ Kingston 64GB@6000Mhz DDR 5/ 2TB nvme 0.2 Samsung 980 PRO/ Deepcool LS720
November 19, 201510 yr Author I have p3d installed on an ssd and I have the same vc stutters as long as I am using the 4 SGSS in NVI. Removing it makes the sim run smooth at the trade of poor image quality (AA). In my case, I find that the 4SGSS has greater performance impact in P3D v3 than in 2.5. NickN suggested not to use NVI with P3D as it's not needed...so i discontinued using it. So yeah no SGSS to remove for me. I've been doing some testing only to realize that I only get this 2-3 sec stutter... then smooth problem on/overland not flying over ocean. Something to do with slow loading textures on land?? One more trick, I'll just buy an 120GB SSD dedicated for P3D and see what happens...if not I'm done for good.
November 20, 201510 yr If you can only afford 1 SSD use it for you OS drive and not p3d drive for max benefit. Cause all the data requests still has to pass through the OS drive. when you have 2 ssd, then give one to p3d When you check task manager resource monitor disk page while p3d running, you see that the busiest drive always is the OS, thus the one most in need of SSD. you can also keep your old HDD to run addons like ASN. better to split stuff off into separate disks. in my case C:\= OS [3 x SSD in raid fastest] D:\ = p3d[2 xSSD in raid] E:\= Addons ASN Fscommander etc [single SSD] G:\= Scenery FsGlobalUltimate, Afcads etc[single SSD] F:\ Storage backup [HDD] No stutters here, Also very highly recommend ProcessLasso. Try not to install anything that's run while simming on your OS drive, windows alone consumes nealy full bandwidth on that drive while simming.
November 20, 201510 yr Author If you can only afford 1 SSD use it for you OS drive and not p3d drive for max benefit. Cause all the data requests still has to pass through the OS drive. when you have 2 ssd, then give one to p3d When you check task manager resource monitor disk page while p3d running, you see that the busiest drive always is the OS, thus the one most in need of SSD. you can also keep your old HDD to run addons like ASN. better to split stuff off into separate disks. in my case C:\= OS [3 x SSD in raid fastest] D:\ = p3d[2 xSSD in raid] E:\= Addons ASN Fscommander etc [single SSD] G:\= Scenery FsGlobalUltimate, Afcads etc[single SSD] F:\ Storage backup [HDD] No stutters here, Also very highly recommend ProcessLasso. Try not to install anything that's run while simming on your OS drive, windows alone consumes nealy full bandwidth on that drive while simming. Thx bro! Will give it a go :smile:
November 20, 201510 yr Commercial Member Try excluding the Lockheed Martin folder in your anti virus program. That worked for me. Michael Cependa Developer Aerosoft DC-8
December 24, 201510 yr Author well..well. I bought two 850 Samsung EVOs 250 Gb (OS) & 120Gb (P3D) to see what happens...guess what It still stutters............... Maybe it's my 960SSC 2Gb idk, maybe 2Gb is not enough
December 24, 201510 yr Stupid question have you tried to install the lds 767 using migration tool?? This caused microstutteers on mine
December 24, 201510 yr Author Stupid question have you tried to install the lds 767 using migration tool?? This caused microstutteers on mine no
Create an account or sign in to comment