February 3, 20179 yr Weill, My first flight, which I use for every new aircraft I get, is from KEDW to KLAX. I did manage to land before the memory crash, but just barely. I only have this issue at KLAX with the PMDG 777 and now the 744V3. I do wish someone he would listen to would tell Umberto there is something wrong with KLAX. I have tried, but it is NEVER an FSDT issue. Sigh........... Scott Kendall S Mann Still Telling Pilots Where To Go!!
February 3, 20179 yr Do you have ORBX SoCal? I have to turn off the ORBX scenery when operating out of KLAX, or I'll OOM. IMHO, it's every bit as much about ORBX and the load of massive amounts of AI traffic in the LA basin as it is about the FSDT scenery. KLAX with SCA (and possibly other nearby add-ons like LatinVFR KSNA) are a bridge too far. With ORBX SCA disabled (using Scenery Config Editor) I can get in and out of there in FSX and P3D without an OOM. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
February 3, 20179 yr Hey everyone,Whenever using PMDG T7/747 coming to land at any airport, whenever flying between large airports, I restart FSX:SE before reaching TOD to refresh VAS. I only use FTX Global and AS16+ASCA, limit traffic to 10 only. Not only with FSDT airports. I know, it is a pain but if not I might get the ding ding dong sound about VAS usage, might not get OOM but close to. Cheers.Hoang Le Hoang Le i7 13700k - Sapphire Nitro+ AMD RX 7900 XT - Asus TUF Z790 PLUS D4 - Gskill Trident 32GB DDR4-3600 LG 34GP63A-B Ultrawide - ASUS VG259QM MSFS2020
February 3, 20179 yr Hello Have you installed Orbx Global Vector? It shielded it, it is very accounting for resources.
February 3, 20179 yr My initial test flight with any new aircraft is very similar - except from Victorville (KVCV) instead of Edwards. I fly to HEC to intercept the RIVVR STAR, to an ILS 25L approach at FSDT KLAX. I have no VAS issues doing this with the new 747. I land with about 900 MB free VAS remaining, which is actually better than the 777 on the same flight. I use Vector and OpenLC NA, along with the new version of FS Global Ultimate mesh. Jim BarrettLicensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.
February 3, 20179 yr Moderator Weill, I do wish someone he would listen to would tell Umberto there is something wrong with KLAX. I have tried, but it is NEVER an FSDT issue. Sigh........... Scott Well, it's not an FSDT issue. I've flow into FSDT LAX hundreds of times in the T7 and NGX and always have around 1gb of VAS left. I only run 1024 textures on scenery, clouds and water which provides ample space for complex addons. Maybe check your texture settings in the Addon Manager and use 1024 rather than 2048 or 4096 if you haven't already. Next is to turn down some settings like cloud draw distances, reduce autogen a tad, cut out some options in Orbx Vector if you use that, and use DXT format clouds at 1024 rather than 32bit cloud sets. You only have so much available space that you need to manage it better to avoid OOMS. Sean Campbell Avsim Board of Directors | Avsim Forums Moderator
February 3, 20179 yr Commercial Member "cmpbellsjc" Do I really get to issue a verbal warning to an AVSim mod for not signing his posts on the PMDG forum? Can I PUHLEEEEEZ just slip a 2 day access ban in there for fun? Pay me $50 i'll make it 3 days so you can have the WHOLE weekend off from moderator duties. Robert S. Randazzo PLEASE NOTE THAT PMDG HAS DEPARTED AVSIM You can find us at: http://forum.pmdg.com
February 3, 20179 yr Author Well, If no one else is having issues with FSDT LAX, then I owe Umberto an apology. I do not have the above mentioned items on my computer. I suppose its time to do a search of SoCal and find the culprit. Scott Kendall S Mann Still Telling Pilots Where To Go!!
February 3, 20179 yr Moderator "cmpbellsjc" Do I really get to issue a verbal warning to an AVSim mod for not signing his posts on the PMDG forum? Can I PUHLEEEEEZ just slip a 2 day access ban in there for fun? Pay me $50 i'll make it 3 days so you can have the WHOLE weekend off from moderator duties. Lol, sorry about that. I can't believe I forgot as I thought it was in my sig. Ironic because I'm usually reminding people to sign their name in the PMDG section. I went back and edited the post for good measure. Btw, I can't give the $50 since I need to use it to by the Queen :-) Avsim Board of Directors | Avsim Forums Moderator
February 4, 20179 yr what i find helps a bit is if i stay inside the airplane during the entire FSX session. i believe that when you change to the outside view it increases VAS use. a lot of times that is (especially at FSDT KLAX) when the sim is showing high VAS symptoms or even crashes, when i change to outside view at LAX. so from the moment you load the sim until you are parked at the LAX gate, do not go to outside view. then, when you do that after you park, you can probably change the view and have no problems at all. (tested this just today, EDDF-KLAX yesterday: with outside views at departure gate, taxi out, cruise, approach, and then at KLAX the plane was a skeleton when i arrived - so i must have been very close to 4GB; today: no outside view until arrival, switching to outside view at KLAX, and no problems with that. i could watch GSX get to work; both flight with same parameters including wx.) Denis Kosbeck KPHX
February 4, 20179 yr Lol, sorry about that. I can't believe I forgot as I thought it was in my sig. Ironic because I'm usually reminding people to sign their name in the PMDG section. I went back and edited the post for good measure. see that you need some help in your signature , best bet is to set in your settings saves you typing it in all the time I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
February 4, 20179 yr Commercial Member Peter, see that you need some help in your signature , best bet is to set in your settings saves you typing it in all the time We should put him on Double Secret Forum Probation, eh? Robert S. Randazzo PLEASE NOTE THAT PMDG HAS DEPARTED AVSIM You can find us at: http://forum.pmdg.com
February 4, 20179 yr We should put him on Double Secret Forum Probation sounds good to me :wink: I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
Archived
This topic is now archived and is closed to further replies.