February 7, 20179 yr I know what you mean Bob. VolFog was something I liked too. Perhaps someday in the future.. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 7, 20179 yr Edit: Ok, I wanted to try something in the middle, so this is the result with max upper vis @ 140 (that is actually quite convincing): Try 200 I did and it looks great and also help performance. At this point they recommand to turn VolFog off... At what point Gerard? David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
February 7, 20179 yr Try 200 I did and it looks great and also help performance. At what point Gerard? I'll give that a try. This setting removes the additional haze layer, right? Which max draw distance have you set for your clouds?
February 7, 20179 yr This setting removes the additional haze layer, right? Which max draw distance have you set for your clouds? min 90 max 120 yes but it still looks great. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
February 7, 20179 yr Try 200 I did and it looks great and also help performance. At what point Gerard? Damian and Jordan advise this at their forums.. The VolFog issue has improved but is far from solved. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 7, 20179 yr min 90 max 120 yes but it still looks great. My min and max drawing distances are both set to 90. More does hurt my performance pretty significantally. Thanks for you answer anyways, I'll give 200 a try tonight.
February 7, 20179 yr Author A few are reporting issues but HiFi cannot duplicate the problem and the beta team have not had any issues of that type at all. With PTA, Envtex and various cloud products there are quite a few combinations and variables outside of AS16/ASCA that could be the culprit, including video drivers. Vic This is what has me concerned, since a few other members are having issues with the latest update that AS 16 folks can't duplicate. Someone emailed me with the exact problem I was having with 6239, yesterday after he installed update. I got an email from the ticket that I filled out, and they told me to do a total uninstall of AS 16 and then reinstall it to see if I have an installation problem. Frankly I doubt that, because I installed the update three separate times with the same result. Again, nothing was changed in my system that was running perfectly except updating to 6239, and immediate problems. Undo update by rolling back to previous trouble free version , problems go away, reinstall update, problems return. At this point in time, I think I am just going to leave well enough alone.
February 7, 20179 yr Test version for use with Vol Fog On Try it and let them know your experience https://hifisimtech.com/forums/showthread.php?8049-AS16-for-P3D-Experimental-Vis-Handling-Builds 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
February 8, 20179 yr I had really bad performance yesterday evening on approach to EKCH ILS 04L in the clouds with snow. UTC 20.20-20.50. Using the FSL A320-X. FPS about 50% cut (15-18) through the clouds. as soon i was free FPS was back. Those landinglights and wing lights really light those clouds up. So many updates these days. Hard to find the culprit Thanks Michael Moe Michael Moe
February 8, 20179 yr So many updates these days. Hard to find the culprit +1 (100% agree) Massimo Burti Intel Core i9-13900K ¦ 64GB DDR4-3200 - 2x 32GB - Kingston Fury Beast - black ¦ 2x 2TB - m.2 NVMe Gen4 - Samsung 980 Pro ¦ Asus ROG Strix Z690-A Gaming WiFi D4 ¦ Asus TUF RTX 3080 Gaming OC LHR - 12GB ¦ 1000W - 80+ Platinum - Seasonic Prime PX
February 8, 20179 yr Reading through this thread is somehow confusing. Sorry for my incompetence, but what would be the best (performance-wise): In sim volumetric fog on or off? Fog layer in AS16 active or not? Max vis. 200 or less? - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
February 8, 20179 yr Author So many updates these days. Hard to find the culprit That is why I have made it a rule since the early days of FS9 to never install more than one update at a time, and then make about 1/2 dozen flights to see if there are any negative effects before installing another one.
February 8, 20179 yr That is why I have made it a rule since the early days of FS9 to never install more than one update at a time, and then make about 1/2 dozen flights to see if there are any negative effects before installing another one. But then i would be 50 instead of 45 Bob Michael Moe Michael Moe
February 8, 20179 yr Moderator I agree with Bob. Through no real fault of the developers, incompatibilities between add ons can be very difficult to track down. The last one added before a problem is the final straw but not necessarily the actual culprit. Adding two or three at once and then trying to isolate the problem becomes very difficult. Sure, it's a slow way to install add ons but how much time do you waste tracking down a problem after a multiple install? Some one once said " Sometimes it's faster to do it the hard way than to try and find the easy way". Vic RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
February 8, 20179 yr You are right offcause. We should slow down. Its just so damn hard with automatic updates from ORBX, Oldprop etc. Just for the record. Today my Windows 10 64 updated the Nvidia from 376.33 to 376.53 all by it self via Windows update. Since i am against all these automatic updates i thought why not just go back to 373.06 so my SLI will work with my 3.4.9.18400. Did the saved flight into EKCH ILS04L that troubled me yesterday and now it was perfect. So staying here for now Thanks Michael Moe Michael Moe
Archived
This topic is now archived and is closed to further replies.