Digial Aviation Do-27 is working.

>PMDG are working on upgrades for the 737 and 747, but have not>said if this will be free. Apparently there is a lot of>re-coding required to get these planes working in FSX.>>I have the 747, but I would hesitate to pay for an upgrade for>FSX because I don't think I could push my rig to drive FSX and>the PMDG 747 at the same time. I think I will keep FS9 for>flying the big jets, and use FSX for low'n'slow VFR.Not only you have to pay for the upgrade,but if you had bought the Aerosoft boxed version you probably had to pay the full price for a new product!.Look at their forum

Hello,I have two working - what I did was:1: create a new temp folder2. Install the addon to the TEMP folder3. Move the items in the temp folder (All of them) to the proper folders in FSX. When I am done, there is no data in the TEMP folder. My installs - the 182Q mainly - works great in FSXCheersRon Sagel

>VoiceBuddy worked without any changes. Just fired it up and>it happily did its thing, even with the heavily modified>profile that I used for FS9. Now I need to scrutinize the FSX>keyboard controls for new/changed items and make a new profile>for FSX.>>Traffic 2005 working, mostly. Takes a few steps. You'll need>to to be comfortable copying files around:>>- Copied all the AI aircraft folders (JFAI*) to a new folder>under SimObjects (I named it AIAirplanes.)>- Added the new SimObjects folder to the MAIN section of>fsx.cfg (SimObjectPaths.6=SimObjectsAIAirplanes.)>(Incidently, the SimObjectPaths can be anywhere, even another>drive. Just specify the full path.)>- Copied the traffic.bgl from fs9sceneryworldscenery to>fsxsceneryworldscenery.>- Renamed existing>fsxsceneryworldscenerytrafficAircraft.bgl to>trafficAircraft.bgl.original (gets rid of FSX AI traffic.)>- Renamed fsxairlines.cfg to airlines.cfg.original>- Copied airlines.cfg from fs9aircraft to fsx (note new>location!)>- Copied my EditVoicePack edited voice file>fs9soundevp_Accelerated.gvp to fsxsoundATC (note new>location!)>- Renamed existing fsxsoundATCUSEnglishBig.gvp to>USEnglishBig.gvp.orginal.>>If you want to make any changes to Traffic 2005, they will>need to be done in FS9, then the changed files copied over to>FSX.>>TrackIR4 is working fine with the new drivers from>NaturalPoint.>>...jim>Contacted edimentional about voice buddy, a fsx profile will be online for download in about a week from today.

How did you manage that? I got a warning saying it couldn't find Flight Simulator?

Actually you have an interim/prerelease Liberty XL2 FSX model that went to the wrong spot and is no longer available....if you notice it has a number of "broken" issues.All of those are fixed in the Release Liberty XL2 FSX model:-)

I can confirm that the FS9 version of Liberty XL2 does not port over to FSX well... I tried before the Eaglesoft update was released. The VC didn't show, many of the animated parts didn't show on the exterior. If someone had a version that did port over it probably was this interim/prerelease version Ron mentioned.

>I can confirm that the FS9 version of Liberty XL2 does not>port over to FSX well... I tried before the Eaglesoft update>was released. The VC didn't show, many of the animated parts>didn't show on the exterior. If someone had a version that>did port over it probably was this interim/prerelease version>Ron mentioned.Exactly Zane. In the fog of late night development a pre beta version got shuffled as an FS9 zip and a few downloaded it before it was corrected.What they have is a buggy version with a known list of "broken" items and must purchase if they wish to have a working FSX Version.:-)

FSD C115 looks and flew well in FSX.

I have the FSD Cessna O-2 imported. however, there's some editing required.If you go into regedit, you have to rename Flight Simulator10.0 to 9.0HKEY_LOCAL_MACHINESOFTWAREMICROSOFTMICROSOFT GAMESFLIGHT SIMULATOR10.0rename 10.0 to 9.0install packagename it back to 10.0This puts it in Flight Simulator Xaircraft. So you either move it to SimObjectsairplanes or add that directory to FSX.cfg[Main]SimObjectPaths.6=Aircraft I found the only problem with the import is the panel switching by its icons don't quite work like they should. So I removed em, and installed some default ones. Unfortunately I had to create one to make the panel work like it did in FS9. I had to add in zorder= entries and rearrange the windows a bit. I can't say how to do that part, as different FSD aircraft will be different. But if you have the O-2 I could send you the files. I haven't tried the Load Manager, it didn't work right on my machine for some reason, so you'll have to check it on your system, or do what I do and edit the aircraft.cfg [email protected]

Does anyone know if current PMDG 737NG and 747 works in FSX or if there is going to be a update for such. Besides them, I want to know if CLS A340-600, FeelThere 737Pic and Erj145, FlySeattle, FlyVienna, FlySanFrancisco, Eaglesoft CitationX, LevelD 767 and others work.No offense to the poster but you can try or test them as well as the next guy.Many times its a trial and error endeavor.The good news is that the Eaglesoft CitationX works fine for me.You do have to have a good working knowledge of the FSX file structure(s) and naming conventions.Craig

"Eaglesoft CitationX works fine for me."No side windows though right :-hmmm You'll find a few other issues over time.

I have windows on the starboard side but not the port. I took a flight of approx. 1 1/2 hours with it yesterday and put it thru its paces and found no other problems yet. Would you be kind enough to enlighten us all what other issues might be encountered? Perhaps other readers may have some type of fix. Thanks, Craig

To quote you..."No offense to the poster but you can try or test them as well as the next guy." Eaglesoft has been totally rebuilding the Cessna Citation X in 3D Studio Max for months and the Avionics are being totally rebuilt in GDI+ with an eye to the future...The current FS9 CX will be replaced by the new Cessna Citation X for FS9 and FSX. More on that when we have more to say.:-)

>I have the FSD Cessna O-2 imported. however, there's some>editing required.>>If you go into regedit, you have to rename Flight>Simulator10.0 to 9.0>>HKEY_LOCAL_MACHINESOFTWAREMICROSOFTMICROSOFT GAMESFLIGHT>SIMULATOR10.0>>rename 10.0 to 9.0>install package>name it back to 10.0>>This puts it in Flight Simulator Xaircraft. So you either>move it to SimObjectsairplanes or add that directory to>FSX.cfg>>[Main]>SimObjectPaths.6=Aircraft >>I found the only problem with the import is the panel>switching by its icons don't quite work like they should. So>I removed em, and installed some default ones. Unfortunately>I had to create one to make the panel work like it did in FS9.> I had to add in zorder= entries and rearrange the windows a>bit. >>I can't say how to do that part, as different FSD aircraft>will be different. But if you have the O-2 I could send you>the files. I haven't tried the Load Manager, it didn't work>right on my machine for some reason, so you'll have to check>it on your system, or do what I do and edit the aircraft.cfg>manually.>>[email protected]>>>Here's how I did both the C115 & C337 without modifying my registry:I just used the original installation files and pointed them to the FSX directory...if fs9 is still installed you'll need to temporarily rename it during installation so the planes aren't automatically reinstalled into fs9. After installation a new AIRCRAFT folder will be created within FSX so you'll need to add the following line to FSX.cfg under the section User Objects=Airplane, Helicopter:SimObjectPaths.6=Aircraft Your path number might be higher if you've already added another folder like AI_Aircraft.So far I haven't discovered any problems or anomalies...both planes look and fly just like they did in FS9..in fact they look better! Also the Load Manager is working and I was able to install new textures or make any other changes using this utility.