April 15, 20206 yr Just got the v5 ready to run. Everything works on v4. V5 keep Crashing after loading screen is finished at 100%. Also something strange is happening every start of the app makes the sim generate scenery things ( I can't recall the name sorry ). Everything is out of the box. Regards S.
April 15, 20206 yr 1 minute ago, Samany69 said: Just got the v5 ready to run. Everything works on v4. V5 keep Crashing after loading screen is finished at 100%. Also something strange is happening every start of the app makes the sim generate scenery things ( I can't recall the name sorry ). Everything is out of the box. Regards S. I've read a dozen other comments on various websites detailing the identical problem with v5 that you're suffering: CTD after loading. So you're not alone. Processor: Intel i9-13900KF 5.8GHz 24-Core, Graphics Processor: Nvidia RTX 4090 24GB GDDR6, System Memory: 64GB High Performance DDR5 SDRAM 5600MHz, Operating System: Windows 11 Home Edition, Motherboard: Gigabyte Z790 Aorus Elite AX, LGA 1700, CPU Cooling: Corsair H100i Elite 240mm Liquid Cooling, RGB and LCD Display, Chassis Fans: Corsair Low Decibel, Addressable RGB Fans, Power Supply: Corsair HX1000i Fully Modular Ultra-Low-Noise Platinum ATX 1000 Watt, Primary Storage: 2TB Samsung Gen 4 NVMe SSD, Secondary Storage: 1TB Samsung Gen 4 NVMe SSD, VR Headset: Meta Quest 2, Primary Display: SONY 4K Bravia 75-inch, 2nd Display: SONY 4K Bravia 43-inch, 3rd Display: Vizio 28-inch, 1920x1080. Controller: Xbox Controller attached to PC via USB.
April 15, 20206 yr By chance do you have an AMD graphics card? Curious because I am having problems. I5-9600k, Radeon RX 5700XT on the most recent WHQL driver. V4.5 runs great. However with the same settings in v5 I get a CTD whenever I switch to a cockpit view. Runs fine as long as I stay in the cockpit initially, but if I change seats, or switch to an external view and then back to the cockpit I get a CTD with a graphics card hang. I have tried multiple aircraft and airports and I've put all the sliders left, right and default. Makes no difference. Graphics card is not overclocked and I turned off my CPU overclock to test and no change. On a positive note, LVFR KMIA looks great (from the cockpit) and performance is much better than in v4.5 even with the Aerosoft A330. I should note that this problem is independent of both the LVFR scenery and the A330 as the problem existed before I installed KMIA or mapped my A330 add on (which does have some glitches). Edited April 15, 20206 yr by cwburnett 5800X3D | Radeon RX 6900XT
April 15, 20206 yr Author Thanks all for response. Now I feel better with what I heard from you guys. My best regards
April 15, 20206 yr 5 minutes ago, Samany69 said: Thanks all for response. Now I feel better with what I heard from you guys. My best regards What graphics card do you have? 5800X3D | Radeon RX 6900XT
April 15, 20206 yr Author 4 hours ago, cwburnett said: By chance do you have an AMD graphics card? Nah, it's a 1070 Ti ... Asus ROG Strix 1070Ti A8G .
April 15, 20206 yr Author 5 minutes ago, cwburnett said: What graphics card do you have? Nvidia 1070 Ti
April 15, 20206 yr Have you made any changes to the Prepar3d.exe profile in either nVidia Control Panel or with another utility like nVidia Inspector? Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
April 15, 20206 yr I had a good fly around last night with V5, but this morning, I loaded up the default airport with the default aircraft and I had some issues with CTD due to VRAM. It showed as 4.9/5.0mb in the frame rate counter, then it crashed. It was dusk/morning so this might have been a bit too much for my card. It is only a GTX1060 which is 6gb and my settings were pretty high so I will have to play with these a little now. I get a new 1080ti at the end of this week so I really cannot wait for this to come now. FS PC - AMD7900X3D / MSI RTX 4090 24gb / 32gb Ram / Varjo Aero / Bravo Quadrant / Thrustmaster HOTAS Warthog / Yoke / TPR Pedals UK Skytours - http://www.ukskytours.co.uk
April 15, 20206 yr I had the same ctd but after turning off the new beta atmosphere, all was ok. Dragos I9-13900K/ Gigabyte RTX 4090 Gaming OC/ Aorus Master Z790/ Kingston 64GB@6000Mhz DDR 5/ 2TB nvme 0.2 Samsung 980 PRO/ Deepcool LS720
April 15, 20206 yr Author 2 hours ago, w6kd said: Have you made any changes to the Prepar3d.exe profile in either nVidia Control Panel or with another utility like nVidia Inspector? Turned down every single setting to the least, turned everything off, used DDU and reinstall many different versions of Nvidia driver version. Still not working. After loading to 100% , it just crashes.
April 15, 20206 yr Commercial Member 37 minutes ago, Samany69 said: After loading to 100% , it just crashes. I had the same problem. I deleted the shader cache and the Prepar3D.cfg, that fixed it. Shader cache is here: C:\Users\...\AppData\Local\Lockheed Martin\Prepar3D v5\Shaders Config file is here: C:\Users\...\AppData\Roaming\Lockheed Martin\Prepar3D v5 Best regards Edited April 15, 20206 yr by Lorby_SI LORBY-SI
April 15, 20206 yr Mine also did that at the beginning. Then I discovered it was because of my RTSS profile, to get the overlay going. Removed that and it loaded up fine. (EDIT: Simply removed the P3D profile within RTSS, to clarify. Not RTSS itself.) Edited April 15, 20206 yr by Sethos [MSI MPG X870E Carbon | 9800X3D (PBO +200Mhz / -20 Offset) | Corsair 64GB DDR5 (Custom Timings) | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 4TB + 4TB | Antec Flux Pro]
Archived
This topic is now archived and is closed to further replies.