1 hour ago, Chocorua said:

Hmmmm, Well here we go. I've used this method several times through P3D versions 3/4/5 and now MFS and its never failed. Same with my flying bud in Florida. Yes, using the latest software I got via the email notice that it supports MFS. Anyone have success with it?    

I get it. Here's what I do not understand. How did you assign the buttons and knobs when it doesn't have support for MSFS 2020?

Edited September 8, 20205 yr by DJJose

45 minutes ago, Dirk98 said:

Which versions of MSFS2020 do you and your flying friend from Florida have? 

Thanks

The updated version (I dont' recall the numbers) 

DJJose: Both of us have P3DV5 still installed and it's already configured for that. Actually I just allow all sims to use the same configuration. 

Question: do any of you have any other sims installed? I have P3D5 still...     

13 hours ago, Chocorua said:

Easy way to make GoFlight work:

Navigate to your C:\\Program Files (x86)\GoFlight\ folder (if that's

where it is) and make a shortcut on your desktop to the "GFDevFSXSE.exe"

in there.

 

2) Then after launching MSFS, run it and your hardware should light up! Working here and a friend of mine has it working also. 

Cheers!

Greg

"GFDevFSXSE.exe"

I only ask because I only have P3D v4 installed. Therefore I'll try "GFDevP3Dv4."

Let me try this.

Edited September 8, 20205 yr by DJJose

Just now, Chocorua said:

The updated version (I dont' recall the numbers) 

DJJose: Both of us have P3DV5 still installed and it's already configured for that. Actually I just allow all sims to use the same configuration. 

Question: do any of you have any other sims installed? I have P3D5 still...     

I'm going to try "GFDevP3Dv4."

13 minutes ago, Chocorua said:

The updated version (I dont' recall the numbers) 

DJJose: Both of us have P3DV5 still installed and it's already configured for that. Actually I just allow all sims to use the same configuration. 

Question: do any of you have any other sims installed? I have P3D5 still...     

I got the side by side error. I tried all the GFDev exec files none did anything except for the FSX SE version that you suggested which leads to an error. Dam!

19 minutes ago, Chocorua said:

The updated version (I dont' recall the numbers) 

DJJose: Both of us have P3DV5 still installed and it's already configured for that. Actually I just allow all sims to use the same configuration. 

Question: do any of you have any other sims installed? I have P3D5 still...     

I asked if it was Steam, MS, XB Pass?

Thanks.

9 minutes ago, DJJose said:

I got the side by side error. I tried all the GFDev exec files none did anything except for the FSX SE version that you suggested which leads to an error. Dam!

Same here.

14 hours ago, Chocorua said:

Easy way to make GoFlight work:

Navigate to your C:\\Program Files (x86)\GoFlight\ folder (if that's

where it is) and make a shortcut on your desktop to the "GFDevFSXSE.exe"

in there.

 

2) Then after launching MSFS, run it and your hardware should light up! Working here and a friend of mine has it working also. 

Cheers!

Greg

That does not work in my MSFS.

If I connect my Goflight modules (LG II and several NAV/COM devices etc.) the simulator crashes to desctop while launching.

Means for me : Wait until Goflight publishes a working version of their driver software.

What a bummer. Sorry to have raised some excitement about this. This trick has worked in the past for many others (in other sims) while waiting for GoFlight updates. Anyway, both of us purchased MFS2020 from the MS store. Still working OK here. I found this, fyi, but I imagine most of you have already searched the error:

https://answers.microsoft.com/en-us/windows/forum/windows_10-other_settings/windows-10-error-the-application-has-failed-to/5c6a015e-4162-491d-b7d9-f3b13612e304?page=17

Greg G   

Edited September 8, 20205 yr by Chocorua
added link

GoFlight have said they will support FS2020 in the past, so support will be coming. If you own GIT or are thinking about it, please see this post about feature status and usage in FS2020: https://www.pollypotsoftware.org.uk/support/forum.html

Best wishes

Steve

So it seems that I can't download the drivers anymore, the link doesn't work 😞 Does anyone had the zip? And also, has anyone gotten this to work with msfs 2020?

Hi,

I have the same problem trying to get my Goflight modules to work in MSFS, I have a RP48 and a GF46 module and have P3Dv5 installed and working, the  modules work OK with V5. I have Spad.next but no luck either, find it difficult to use and found no suitable

profile that works.

In the past GoFlight always produced a driver for each new version of FS, looks like no such luck this time.

Has anyone tried or is using Axis and Ohs and got it to work for GoFlight???

Thanks

 

I have GF-166 radio module and is finally working in MSFS without any external software. Not only buttons but displays aswell.

I don't have any other flight simulator installed. Just MSFS.

Instructions:

-Install Goflight software and put GFDevFSX.exe (*1) in main goflight software folder.

-Start MSFS and enter flight.

-When on cockpit, just manually start GFDevFSX.exe and thats it. Displays lights up with in game freqs and everything is working. I supose it should work with other modules.

 

(*1) I uploaded GFDevFSX.exe to mediafire. It should work because I had to external downloaded myself.

http://www.mediafire.com/file/swthkkaux30f8wu/GFDevFSX.exe/file

GFDevFSX.exe is installed when I run the GFConfigSetup_2_28_0.exe installer.
Why do you point to a separate download for it?

To me and a to alot of people that don't have FSX, the GpFflight software doesn't install GFDevFSX.exe and it took a long time for me to find a download link. For those who have GFDevFSX.exe, you obviously don't need my link.