December 5, 20205 yr Hi all, Trying to start a flight from SimWings EGLL with QW 787 that I've done a million times. Get to the menu screen, select aircraft, airport, click ok and then the whole programme crashes to desktop every single time. Please help! B AMD Ryzen™ 9 9900X3D, AM5, Zen 5, 12 Core, 24 Threads, 4.4GHz, 5.5GHz Turbo 64GB (2x32GB) DDR5 6000MHz Corsair Vengeance 32GB GeForce® RTX 5090 Graphics Card
December 5, 20205 yr Pretty sure this is about trueglass, have you tried disabling it in the main p3d folder?
December 5, 20205 yr I'd start by rebooting the computer and then try to start a flight with a default acft at a default airport. If that doesn't work, I restore my last good configuration snapshot using Lorby-SI's P3D Addon Organizer and try again after another reboot. P3D Addon Manager takes snapshots of your config files (all of them in one easy click), which can be used to rapidly restore things to working order after a disorderly shutdown or other glitch boogers-up a config file somewhere. Takes a lot less time than trying to troubleshoot where things might have gone wrong, or (horrors) having to delete your generated files and reinstall a bunch of add-ons. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
December 5, 20205 yr 1 hour ago, w6kd said: I'd start by rebooting the computer and then try to start a flight with a default acft at a default airport. If that doesn't work, I restore my last good configuration snapshot using Lorby-SI's P3D Addon Organizer and try again after another reboot. P3D Addon Manager takes snapshots of your config files (all of them in one easy click), which can be used to rapidly restore things to working order after a disorderly shutdown or other glitch boogers-up a config file somewhere. Takes a lot less time than trying to troubleshoot where things might have gone wrong, or (horrors) having to delete your generated files and reinstall a bunch of add-ons. Do we still have to set up our default flight with a default aircraft at a default airport? I asked this question when I ran FSX, but I didn't think it was necessary in P3d. Of course, if it means that everything that needs to "load" will load by doing that, I will change my default setup immediately. Would love to hear if others are doing that or if it's really recommended. Stan
December 6, 20205 yr 2 hours ago, BWBriscoe said: Hi all, Trying to start a flight from SimWings EGLL with QW 787 that I've done a million times. Get to the menu screen, select aircraft, airport, click ok and then the whole programme crashes to desktop every single time. Please help! B Maybe it is related, today I got my first CTD with 5.1HF1 while loading QWs 787. The CTD occurred after a "DXGI_ERROR_ACCESS_DENIED" message, which is obviously not the the often discussed "DEVICE HUNG" error. I call it DEAD error message, because things went even worse. After this, as you, I could not even load any flight any more. Starting P3D, I reached the Welcome Screen but then, always CTD with the DEAD message, no matter which a/c or saved flight I tried to load. To make a long and stressful story short: Uninstalled QW 787, run the P3D client repair function, re-installed QW 787. Pooh, all is good again (knock on wood ...) Edited December 6, 20205 yr by Nemo - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
December 6, 20205 yr Pretty sure its the trueglass dll in your P3D guages folder. I was getting DXGI and other crashes even with freeware/default aircraft at some airports. Chucked the trueglass dll out of the guages folder and I've been flying QW, PMDG, Majestic and Carenado for hours on end with no crashes.
December 6, 20205 yr I was getting DXGI crashes in the Maddog until I renamed the trueglass.dll file as @FrankSalo just mentioned. Magic cure. Enrique Vaamonde
December 6, 20205 yr All of a sudden I've been having the same issue. It started with the QW 757 and now it affects all aircraft, including Pmdg. I've been trying to figure it out for two days. I deleted trueglass.dll a long time ago and I made sure it's still not in the gauges folder. I've uninstalled everything and reinstalled them all. The issue remains.......very frustrating
December 6, 20205 yr Did you guys updated your nvidia drivers short before getting those crashes? If yes....it is the trueglass.dll. Because they seem related. If you turn trueglass.dll off. Stat P3D once. Start a flight. Stop P3D. Turn trueglass.dll on again. That should be it and working now. Sometimes I have to do this twice. After you update your nvidia driver, you have to do this again. There seem to be issues with this driver combined with trueglass.dll Marcua Edited December 6, 20205 yr by mpo910 Regards, Marcus P.
December 6, 20205 yr Marcua, I did update the driver but I was having the issue before the update. Not sure I follow...why would there be a conflict with trueglass.dll if it is no longer in the directory?
December 6, 20205 yr 1 hour ago, pads103 said: Marcua, I did update the driver but I was having the issue before the update. Not sure I follow...why would there be a conflict with trueglass.dll if it is no longer in the directory? OK. sorry for the misunderstanding. I thought you had trueglass.dll still "in there". Did you deactivate reallight also? Maybe it has it´s issues too (QW787.CFG tool). Regards, Marcus P.
Archived
This topic is now archived and is closed to further replies.