August 3, 20214 yr Thanks Milviz, got the Ported flying again. Had to figure out how to get the RXP GTN's going as the MVAMS tool did not update the V5 Porter. Strange that the Milviz forum makes hardly any mention of the updates. Johan Pienaar
August 3, 20214 yr 20 minutes ago, pinepix62 said: Thanks Milviz, got the Ported flying again. Had to figure out how to get the RXP GTN's going as the MVAMS tool did not update the V5 Porter. Strange that the Milviz forum makes hardly any mention of the updates. Copy and paste to panel cfg. // This Panel.cfg file created by FS Panel Studio panel editor utility - http://www.fspanelstudio.com // Built Thursday, June 19, 2014 at 16:37 FSPS Build:22767 [Window Titles] Window00=Main Panel Window01=GPS Window02=Autopilot Window03=Reality XP GTN 650 Unit 1 (managed) Window04=Reality XP GTN 750 Unit 1 (managed) Window05=DME [VIEWS] VIEW_FORWARD_WINDOWS=MAIN_PANEL,GPS_PANEL VIEW_FORWARD_DIR=10.000, 0.000, 0.000 //-------------------------------------------------------- [Window00] Background_color=0,0,0 size_mm=1024,768 position=1 visible=0 ident=10 //-------------------------------------------------------- [Window01] Background_color=0,0,0 size_mm=1280,650 window_size_ratio=1.000 position=2 visible=0 ident=GPS_PANEL window_size= 0.710, 0.552 window_pos= 0.290, 0.480 gauge00=..\panel\PC6_XMLGauges!FBS_GNS430_2d, 640,0,640,268 gauge01=..\panel\PC6_XMLGauges!KR 87 ADF, 640,268,640,134 gauge02=..\panel\PC6_XMLGauges!FBS_GNS530_1d, 0,0,640,468 gauge03=..\panel\PC6_XMLGauges!FBS_GTX330, 0,468,640,170 [Window02] BACKGROUND_COLOR=1,1,1 size_mm=170,84 window_size_ratio=1.000 position=8 visible=0 ident=Autopilot window_size= 0.400, 0.128 window_pos= 0.500, 0.180 gauge00=..\panel\KAP140_HSI!MV_KAP140_PopupDisplay, 0,0,170,84 [Window03] Background_color=0,0,0 size_mm=937,390 window_size_ratio=1.000 position=7 visible=0 ident=14403 window_size= 0.340, 0.260 window_pos= 0.660, 0.728 zorder=99 gauge00=rxpGTN!GTN_650_1, 0, 0,937,390 //-------------------------------------------------------- [Window04] Background_color=0,0,0 size_mm=937,990 window_size_ratio=1.000 position=7 visible=0 ident=14401 window_size= 0.340, 0.580 window_pos= 0.660, 0.160 zorder=99 gauge00=rxpGTN!GTN_750_1, 0, 0,937,990 //-------------------------------------------------------- [Window05] Background_color=8,8,8 size_mm=504,237 window_size_ratio=1.000 position=7 visible=0 ident=10030 window_size= 0.173, 0.070 window_pos= 0.240, 0.630 no_luminous=1 zorder=7 type=special gauge00=Bendix_King_Radio!Bendix-King Radio DME,0,-6,503,243 //-------------------------------------------------------- [Vcockpit01] Background_color=0,0,0 size_mm=256,256 visible=0 pixel_size=1024,1024 texture=$vpanel gauge00=..\panel\PC6!PC6_Controllers,1,1,1,1 gauge01=..\panel\PC6!PC6_SysEvents,1,1,1,1 gauge02=..\panel\PorterSystems!PorterSystems, 0,0,1,1 gauge04=..\panel\amsinterop!amsinterop,1,1,1,1 gauge05=..\panel\MV3DSound!MV3DS, 0,0,1,1,SimObjects\\Airplanes\\MV_PC-6_Base\\PC6_XML_Sounds#80 gauge06=TrueGlass!Core,0,0,1,1 gauge07=RealLight!Core,0,0,1,1 [Vcockpit02] Background_color=20,20,20 size_mm=1024,1024 visible=0 pixel_size=1024,1024 texture=$C310_VC_01 gauge00=..\panel\Milviz_GPS!FBS_GNS430_2, 0,451,640,262 gauge01=..\panel\KAP140_HSI!MV_KAP140Display, 0,852,640,163 gauge02=..\panel\KAP140_HSI!MV_KAP140Servos, 0,0,1,1 gauge03=..\panel\PC6_XMLGauges!KR 87 ADF, 0,715,640,134 gauge04=Console!console_GTN750_650, 0,0,1,1 gauge07=..\panel\PC6_XMLGauges!n1_2, 822,105,200,81 gauge08=..\panel\PC6_XMLGauges!n1, 823,225,200,81 gauge09=..\panel\PC6_XMLGauges!egt1, 822,376,200,81 gauge10=..\panel\PC6_XMLGauges!np1, 822,860,200,81 //--------------------------------------------------------- [Vcockpit03] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_01 texture00=RL_1, 0,0,2048,2048 [Vcockpit04] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_02 texture00=RL_2, 0,0,2048,2048 [Vcockpit05] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_03 texture00=RL_3, 0,0,2048,2048 [Vcockpit06] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_04 texture00=RL_4, 0,0,2048,2048 [Vcockpit07] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_05 texture00=RL_5, 0,0,2048,2048 [Vcockpit08] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_06 texture00=RL_6, 0,0,2048,2048 [Vcockpit09] Background_color=0,0,0 size_mm=2048,2048 visible=1 pixel_size=2048,2048 texture=$VC_07 texture00=RL_7, 0,0,2048,2048 [Vcockpit10] Background_color=0,0,0 size_mm=4096,4096 visible=1 pixel_size=4096,4096 texture=$VC_08 texture00=RL_8, 0,0,4096,4096 [Vcockpit11] Background_color=0,0,0 size_mm=4096,4096 visible=1 pixel_size=4096,4096 texture=$VC_09 texture00=RL_9, 0,0,4096,4096 //-------------------------------------------------------- [Vcockpit12] background_color=0,0,0 size_mm=2048,2048 pixel_size=2048,2048 texture=$Int_TG_0 texture00=TG_0, 0,0,2048,2048 //-------------------------------------------------------- [Vcockpit13] background_color=0,0,0 size_mm=2048,2048 pixel_size=2048,2048 texture=$Int_TG_1 texture00=TG_1, 0,0,2048,2048 [Vcockpit14] Background_color=0,0,0 size_mm=1024,1024 visible=1 pixel_size=1024,1024 texture=$Bell_407 gauge01=..\panel\PC6_XMLGauges!Chronometer, 270,410,630,630 gauge02=..\panel\PC6_XMLGauges!C310_DME, 10, 0,300,80 [Vcockpit15] Background_color=0,0,0 size_mm=1024,1024 visible=1 pixel_size=1024,1024 texture=$GTN750 gauge00=rxpGTN!GTN_750_1, 0, 0,677,794,NO_BEZEL //-------------------------------------------------------- [Vcockpit16] Background_color=0,0,0 size_mm=1024,512 visible=1 pixel_size=1024,512 texture=$GTN650 gauge00=rxpGTN!GTN_650_1, 0, 0,677,297,NO_BEZEL [Default View] X=0 Y=0 SIZE_X=8192 SIZE_Y=6143 Greg Greg Morin Commercial ASMEL Instrument CFI Beta Tester i Blue Yonder, Flightbeam and Milviz
August 3, 20214 yr 2 hours ago, blaunarwal said: As a registered user with access to the respective support forum I could download the updated installers. I don´t know when they update the shop. I mailed them today to ask if the 737 is v5 or not. I got quick answer. Dan Are you downloading a 'fix' for each aircraft or its a complete download for each aircraft? T45
August 3, 20214 yr 1 hour ago, gregmorin said: Copy and paste to panel cfg. Thanks for the info. The Porter is surprisingly demanding on VRAM (had to dial back some graphics settings) and I am getting CTD's after a couple of minutes of flying. Will have to do some digging.😡 Johan Pienaar
August 3, 20214 yr 2 minutes ago, pinepix62 said: Thanks for the info. The Porter is surprisingly demanding on VRAM (had to dial back some graphics settings) and I am getting CTD's after a couple of minutes of flying. Will have to do some digging.😡 Im also having a ctd when entering flightplan on gtn750 I5 9600k@ 4.8ghz rx580 limping-along 2x 23" 1080P Monitors
August 3, 20214 yr 57 minutes ago, btacon said: Full install new v5 installers. Are they identified as v5? I went into my account & d/l the Beaver. Install was looking for P3D v4, however got it into v5. But I can't get the AP to work, so not sure if I got the v5. T45
August 4, 20214 yr Just looked. The filename does not mention v5 but the installer does. I've not checked yet as I've been flying my KA350i using the new simbrief integration. Very cool. I will test on my rig and report back. -btacon
August 4, 20214 yr All updates good but the Porter causes CTDs with me Reasons? Will try dialling back graphics xxd09
August 4, 20214 yr 2 hours ago, xxd09 said: All updates good but the Porter causes CTDs with me Reasons? Will try dialling back graphics I have a RTX3090 with 24 GB and didn't have problems. Seems to be a VRAM problem then. I think you can set different GPS in MVAMS app. Otherwise only reducing the texture size could help. This had to be done manually. I did things like this bevore with mit 8GB 2080. I have a good tool for this called XnView and XnConvert. Of course the look will be less good but maybe neglectable. OS=WIN11 Home, Sim=P3D5 5.3 (P3D4 and FSX for install reasons) Addons=ORBX, ASCA, AS, TOGA and tons of sceneries, aircraft MB=Gigabyte AORUS Z790 Elite AX, CPU=i13900K, Cooling=Be quiet! Pure Loop II FX GPU=KFA2 RTX3090 24 GB, RAM=64 GB DDR5-5600, HOTAS=Logitech G Saitek X52 Pro Visit my website for fixes and addons: https://sites.google.com/view/dans-p3d-mods
August 4, 20214 yr 12 hours ago, btacon said: Just looked. The filename does not mention v5 but the installer does. I've not checked yet as I've been flying my KA350i using the new simbrief integration. Very cool. I will test on my rig and report back. -btacon After the d/l, during the install process, there was a screen where you needed to 'tick a box' for which version of the aircraft you wanted to install. I only saw v2 & v4. Did you see v5 as a choice at that screen? Thanks T45
August 4, 20214 yr V5 was in all my installers but I got them from the support forum. Each of the four are clearly identified as version five installers. Hope this helps Edited August 4, 20214 yr by btacon
August 4, 20214 yr 18 hours ago, blaunarwal said: Didn´t fly the Turbo Otter yet Did a short flight of this too, beeing cautios with rpm and staying in the green and it was a successful flight. It works well in v5.2 HF1. I wonder, why in the world did Milviz not made these installers before, selling many more of these wonderful models during the past year. I'm glad it's working now and hope LM does not brake these planes with the next upgrade. OS=WIN11 Home, Sim=P3D5 5.3 (P3D4 and FSX for install reasons) Addons=ORBX, ASCA, AS, TOGA and tons of sceneries, aircraft MB=Gigabyte AORUS Z790 Elite AX, CPU=i13900K, Cooling=Be quiet! Pure Loop II FX GPU=KFA2 RTX3090 24 GB, RAM=64 GB DDR5-5600, HOTAS=Logitech G Saitek X52 Pro Visit my website for fixes and addons: https://sites.google.com/view/dans-p3d-mods
August 4, 20214 yr Commercial Member It needs to be made 100% clear: This is the last update on these products (with the exception of the WX fix when/if it comes)… unless LM comes out with a sim that is close to or better than msfs in terms of looks… we’re not coming back (except for Milsim)… also, I’ll ask Osh to put the new installers up on the sales page soon. Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
Archived
This topic is now archived and is closed to further replies.