rickgo

ASCA doesnt work when Volumetric cloud slider is set to low,med, and high setting and of course Ea is on.

Dave, Ill just wait for the next update as suggested. I did try the same route again but checked all atc options and still had the off course message after passing " Lewke". Rick

I had the same situation the other day..If you have none of the ATC options checked in "config" setting, then the p2a flt plan and the internal atc flight plan should be the same..If I understand this correctly. It obviously made a change (I flew it twice) but I dont know why. Rick

From Richard @navigraph: RE: Pilot2Atc by NAVDATA » Thu Jul 21, 2016 7:12 pm Hi Rick, that was our plan yes, but there are still bugs in the dataset sorry ... small one but still there. It makes no sense, to release a dataset, where I know that this is buggy ... sorry Rick. We do our best but the format is my death ... I´m still working on it, and it´s the only addon at the moment on which I work ...

There is a topic on this at the Navigraph forum. The latest is hopefully to have it included for the next cycle release... Rick

Hi Dave, KGNT Kabq ifr. I did not receive any tod instruction. Then I flew Kabq to Kgnt and the same happened. Rick Ver 2.013

Will Unicom be available at uncontrolled airports for announcing Taxi and takeoff in the future? I see nothing for say it and I usually will get unhandled exception if I try. RICK

Hi Clive,,I tried the kleb kcon as you suggested. I had a problem handing off from departure to Bos Center..Dep freq was 134.7 and Bos Ctr freq was also 134.7 ....at this point Bos Ctr would not Answer...and I kept getting prompted by Dept to contact Boss Ctr....Rick...Itried this flight twice and same results

hI Clive, KLEB- IF35 CO KCON 7000 ft..Im pretty sure the xponder was active..I will refly sometime soon. I think Dave sent yu the flightplan....Rick

Hi Arwen, this is my KLeb to KCON flight.(IFR) .Everything went well until I reached "TOD".. I passed this point by 5 miles and atc never contacted, so I asked for descent to 2500 and they replied...after this there was no further contact by ATC...so I just went ahead , jumped on ILS 35 and landed..So everything went well until TOD.. Atis for weather Contacts App for ifr clearance grd for taxi App for IFR release Tower for takeoff app for enroute Simulator Connected Recognition Engine Installed Grammars Loaded NextWpt: TOD Radio check lance One Victor Bravo; lance One Victor BravoYou are loud and clear. lance One Victor Bravo Ready to Copy IFR Clearance; lance One Victor Bravo, Contact Ground on One Two One Point Six enjoy your morning ~Contact Ground on One Two One Point Six lance One Victor Bravo lance One Victor Bravo Ready Taxi; lance One Victor Bravo, Contact Ground on One Two One Point Six enjoy your morning ~Contact Ground on One Two One Point Six lance One Victor Bravo lance One Victor Bravo; Ready Copy IFR Clearance; lance One Victor Bravo Request IFR Clearance and Release from ATC Center on One Three Four Point Seven, have a nice day ~Contact Center for IFR Clearance on One Three Four Point Seven lance One Victor Bravo lance One Victor Bravo Ready to Copy IFR Clearance; State Change to: FlightPlanDelivered lance One Victor Bravo is cleared to Kilo Charlie Oscar November as filed. Maintain , Seven Thousand feet . Departure on One Three Four Point Seven Squawk Five Two One Six ~lance One Victor Bravo is cleared to Kilo Charlie Oscar November as filed. Maintain , Seven Thousand feet . Departure on One Three Four Point Seven Squawk Five Two One Six lance One Victor Bravo is Cleared to Kilo Charlie Oscar November as filed Maintain Seven Thousand Feet Departure on One Three Four Point Seven Squawk Five Two One Six; lance One Victor Bravo Readback Correct. Call for IFR Release when number one for departure. lance One Victor Bravo Ready Taxi; lance One Victor Bravo Standby State Change to: TaxiOut lance One Victor Bravo Taxi to Runway Two Five Via Taxiways Bravo, Hold Short Runway One Eight, and Runway Two Five ~ Taxi to Runway Two Five Via Taxiways Bravo, Hold Short Runway One Eight, and Runway Two Five lance One Victor Bravo Taxi to Runway Two Five via Taxiways Bravo Hold Short Runway One Eight and Runway Two Five lance One Victor Bravo; lance One Victor Bravo Clear to cross runway One Eight ~Crossing Runway One Eight lance One Victor Bravo crossing Runway One Eight lance One Victor Bravo; State Change to: AtDepartureRunway lance One Victor Bravo Contact Tower on One Two Five Point Niner Five, enjoy your morning ~Tower on One Two Five Point Niner Five lance One Victor Bravo Tower on One Two Five Point Niner Five lance One Victor Bravo; ~lance One Victor Bravo is number one for departure runway Two Five at Kilo Lima Echo Bravo request IFR Release lance One Victor Bravo is Number One for Departure Runway Two Five at Kilo Lima Echo Bravo Request IFR Release; lance One Victor Bravo You are released for departure. Runway Two Five at Kilo Lima Echo Bravo After takeoff turn Left to heading One Four Seven Climb and maintain , Seven Thousand feet . Release for departure void at Sixteen Zero Five Zulu advise with alternate intentions no later than Sixteen Ten Zulu Time now is Fifteen Fifty Eight Zulu ~lance One Victor Bravo Released for departure Runway Two Five at Kilo Lima Echo Bravo After takeoff turn Left to heading One Four Seven Climb and maintain , Seven Thousand feet . Release for departure void at Sixteen Zero Five Zulu ~lance One Victor Bravo ready for departure runway Two Five lance One Victor Bravo Ready for Departure Runway Two Five; State Change to: TakeoffIFR lance One Victor Bravo Whinds are calm Altimeter is Three Zero Two Four Cleared for takeoff, Runway Two Five Squawk Five Two One Six ~Cleared for takeoff, Runway Two Five Squawking Five Two One Six lance One Victor Bravo lance One Victor Bravo Contact Departure on One Three Four Point Seven, have a good one ~Departure on One Three Four Point Seven, have a good morning lance One Victor Bravo Departure on One Three Four Point Seven; lance One Victor Bravo; lance One Victor Bravo At Four Thousand One Hundred Climbing to Seven Thousand; State Change to: DepartureIFR lance One Victor Bravo good morning . Squawk Five Two One Six ~Squawk Five Two One Six lance One Victor Bravo Squawk Five Two One Six lance One Victor Bravo; lance One Victor Bravo Contact BOSTON APP/DEP APPROACH on One Two Seven Point Three Five, enjoy your morning ~Approach on One Two Seven Point Three Five lance One Victor Bravo Approach on One Two Seven Point Three Five lance One Victor Bravo; lance One Victor Bravo At Five Thousand Three Hundred; Climbing to Seven Thousand; lance One Victor Bravo good morning . Squawk Five Two One Six Expect the ILS approach to runway Three Five ~Squawk Five Two One Six lance One Victor Bravo Squawk Five Two One Six lance One Victor Bravo; NextWpt: IF35 lance One Victor Bravo Request Descent to Two Thousand Five Hundred; lance One Victor Bravo stand by. lance One Victor Bravo Negative. Your requested altitude is below the minimum for your route. Descend and Maintain , Three Thousand , Five Hundred feet ~ Descend and Maintain Three Thousand Five Hundred feet lance One Victor Bravo lance One Victor Bravo Request Descent to Two Thousand Five Hundred Feet; lance One Victor Bravo stand by. lance One Victor Bravo Negative. Your requested altitude is below the minimum for your route. NextWpt: CO NextWpt: RW35 I hope this Helps....Rick Dave, Please take a look at this

Yesterday, I had 3 excellent Ifr flights with the last one terminating in a uncontrolled airport and I departed from kcae. Today I am grounded.I cant leave kcae. Any time I comm with clearance I get "unhandled exception" and then ATC stops. I also can go into config and invoke comms with clearance and all is ok..I then listen to atis and change freq to clearance make my request and "unhandled excetion" starts. I have tried with a previously saved flightplan generated by p2a and I have also created a new with same results...HTH Rick ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at P2AData.SIDPlan.get_SpokenName() at P2ASpeech.Controller.HandleIFRClearanceRequest(String& Rtn, SpeechInteraction SI, String& SugRes) at P2ASpeech.Controller.r(String& A_0, SpeechInteraction A_1, String& A_2) at P2ASpeech.Controller.RespondToPilot(SpeechInteraction SI) at P2ASpeech.ATCListener.HandleRecognizedSpeech() at P2ASpeech.ATCListener.a(Object A_0, RecognizeCompletedEventArgs A_1) at System.Speech.Recognition.SpeechRecognitionEngine.RecognizeCompletedProxy(Object sender, RecognizeCompletedEventArgs e) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- Pilot2ATC_200 Assembly Version: 2.0.0.1 Win32 Version: 2.0.0.1 ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.6.1068.2 built by: NETFXREL3STAGE ---------------------------------------- Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 14.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- P2A_Globals Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- P2AData Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- P2A_Controls Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.6.1067.0 built by: NETFXREL3STAGE ---------------------------------------- P2AFly Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- System.Management Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Deployment Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- EntityFramework Assembly Version: 6.0.0.0 Win32 Version: 6.0.20911.0 ---------------------------------------- GMap.NET.Core Assembly Version: 1.7.0.0 Win32 Version: 1.7 ---------------------------------------- System.Data Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.ServiceModel Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- EntityFramework.SqlServer Assembly Version: 6.0.0.0 Win32 Version: 6.0.20911.0 ---------------------------------------- Anonymously Hosted DynamicMethods Assembly Assembly Version: 0.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Transactions Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Numerics Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Data.OracleClient Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Web Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- P2ASim Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- SlimDX Assembly Version: 4.0.13.43 Win32 Version: ---------------------------------------- System.Speech Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- GMap.NET.WindowsForms Assembly Version: 1.7.0.0 Win32 Version: 1.7 ---------------------------------------- P2ASpeech Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- P2AWeather Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 ---------------------------------------- FSUIPCClient Assembly Version: 2.4.0.0 Win32 Version: 2.4.0.0 ---------------------------------------- System.Xml.Linq Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.EnterpriseServices Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- EntityFrameworkDynamicProxies-P2AData Assembly Version: 1.0.0.0 Win32 Version: 6.0.20911.0 ---------------------------------------- System.Runtime.Serialization Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Web.Extensions Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1067.0 built by: NETFXREL3STAGE ---------------------------------------- Accessibility Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1067.0 built by: NETFXREL3STAGE ---------------------------------------- System.Data.SQLite Assembly Version: 1.0.84.0 Win32 Version: 1.0.84.0 ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1067.0 built by: NETFXREL3STAGE ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1067.0 built by: NETFXREL3STAGE ---------------------------------------- NAudio Assembly Version: 1.6.0.0 Win32 Version: 1.6.0.0 ---------------------------------------- SMDiagnostics Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.ServiceModel.Internals Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.ServiceModel.Channels Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.ServiceModel.Web Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- System.Net.Http Assembly Version: 4.0.0.0 Win32 Version: 4.6.1055.0 built by: NETFXREL2 ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

If it works like V1, then yes it will work but speech training (windows) is advised. Rick

The" 7-11 Store" had me revisiting the past and of course the famous "Icee" drink, which could only be found at the 7-11...I guess the 1960's...good video Rick

Joe,I have the Asus z97 A... board and just decided to o'clock Using the EZ tune feature of bios...very simple..should only take about a minute..I now fly at 4.4 mhz vs 3.8 before RICK , I5 4690k)

Ok, I found the setting in my profile under setting..It was called the forum board face. even thoough I excluded on the forum page I think the only way to turn it back on was n the profile... Rick

Hi, I have managed to exclude the forums front page while trying to figure out why my "view more" forum topics are blank..Need some help here! Rick

Flight Sim planner.... Rick

- Did you install VC2013 C++ x86 libraries?

I ran into this problem also. I set so many exceptions , but it didnt work. I uninstalled AVG and installed Avast ..Problem solved Rick

Simmarket is 1.6 as of today...Rick

I guess youve heard of the silent majority...Metro with Mods is one of my favorites..Absolutely the best $20 I've ever spent on a plane.. Rick

I actually use the wndowpane view more than trackir... Rick

Hi, there is another thread in the fsx forum about the Metroliner...about 20 pages.. and dont forget the razbam forum...I got mine a couple of hours ago, been waiting on this sale for a few months... Rick

1

I think you ought to try the vfr-French bushie...After one short hop and this is my goto short hop bush..Im currently touring Norway and Mexico in this plane..a lot of fun.. http://frenchvfr.free.fr/ Rick