Okay I tried using SimBrief to import flight plans and it works better in one of the two cases. Previous tests were done with the World map.

Edited August 18, 20214 yr by RobJC

I can't see any wind data? How to enable wind overlay? 

I have been trying to use the G1000NXi in the Baron58 but am having some issues.

1. After entering a FP the G1000NXi does fly the route correctly, but fails to capture the GS on an RNAV approach after approach activation.

2. After loading the FP (by hand), the FP display returns to a flashing Origin indication. It seems something is ALWAYS flashing -- is that normal? I expected flashing to stop after loading the approach. I had specified the departure and destination runways, the Baro minimuns, the approach and approach transition, etc.

3. When setting the Baro minimums I can only seem to increment the desired altitude in 10ft steps -- could not find any 'bigger' click spots. This is frustrating at a high altitude airport like KCOS where the mins are about 6300ft.

4. I am not using any other G1000 mods, Community folder is empty.

I realize the G1000NXi is still under development, and perhaps that explains some of the above.

Thanks for any advice,

Al

Edited August 18, 20214 yr by ark

19 hours ago, Alvega said:

Did you reduce your selected altitude?

Just reporting back that that was what I was missing, thanks again, VNV working now.

1 hour ago, spitzer45 said:

I can't see any wind data? How to enable wind overlay? 

On the PFD options / Wind / option 2

On 8/14/2021 at 4:45 PM, dga711 said:

I have a problem with v0.3.0. If I start entering the flight plan with the keyboard I then can't move the flaps or the trim or hide the yokes anymore. Everything stops working

Same thing for me. I tried restarting the sim a few times  -- locked up every time. I also tried clicking on the screen in different places but it didn't seem to make any difference.

Al

16 minutes ago, ark said:

Same thing for me. I tried restarting the sim a few times  -- locked up every time. I also tried clicking on the screen in different places but it didn't seem to make any difference.

Al

Yeah, I already reported that is this thread too. Looks like sometimes it works and other tines it doesn't.

5 hours ago, ark said:

2. After loading the FP (by hand), the FP display returns to a flashing Origin indication. It seems something is ALWAYS flashing -- is that normal? I expected flashing to stop after loading the approach. I had specified the departure and destination runways, the Baro minimuns, the approach and approach transition, etc.

I've noticed this too, I think the flashing should stop by pressing the bottom right knob, but it doesn't do anything.

Really enjoying this update, the more I use it and learn it, the better it gets and improves my entire flight experience.

Thanks to Matt and the WT team, look forward to the next update with even more improved features! 😊