September 17, 20214 yr On 9/16/2021 at 7:06 PM, MattNischan said: Thanks Bert, that's very kind! I'm actually somewhat amused as to how little traction or attention the NXi has gotten on these forums. I seem to recall this crowd yelling somewhat the loudest about how poor the original G1000 was, but relatively little fanfare about one that now does all the IFR stuff everyone wanted in the first place (and a good deal more). Of course, we're not powered by fanfare, so we'll keep on building the thing out, because we actually really enjoy flying it too! 😉 -Matt I love it!!! MS FS 2020/2024 | 9800X3D | 64GB DDR5 6000mhz | ASUS ROG ASTRAL RTX 5090 32GB GDDR7 OC EDITION | Varjo Aero | Navigraph | VATSIM | TPR Pedals | Virpil | Honeycomb | Winwing FCU + EFIS | Behringer X Touch Mini | SPAD.next
September 17, 20214 yr 13 minutes ago, Rene_Feijen said: I love it!!! I really like it too. 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
September 17, 20214 yr On 9/16/2021 at 1:06 PM, MattNischan said: Thanks Bert, that's very kind! I'm actually somewhat amused as to how little traction or attention the NXi has gotten on these forums. I seem to recall this crowd yelling somewhat the loudest about how poor the original G1000 was, but relatively little fanfare about one that now does all the IFR stuff everyone wanted in the first place (and a good deal more). Of course, we're not powered by fanfare, so we'll keep on building the thing out, because we actually really enjoy flying it too! 😉 -Matt I love your work! That's for sure! Are you going to improve the GNS units too? They need lots of love. I refuse to touch them Juan Ramos
September 17, 20214 yr Has any work started on the World Map Flight Planner? It would be great to get that fixed up and synced with the G1000. http://youtube.com/c/Greazer
September 18, 20214 yr On 9/16/2021 at 7:06 PM, captain420 said: MS/Asobo recocgnizes talent and was a very wise decision on their part. my feeling is this was rather MS/Jörg Neumanns "wise" decision 😊 AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
September 18, 20214 yr On 9/16/2021 at 1:12 PM, Waldo Pepper said: My favorite feature of the NXi (aside from keyboard input) is support for mapping G1000 controls like the FMS double encoder knob/pushbutton, and the MFD's range knob. Is there a G1000NXi document that describes the support for mapping the G1000NXi controls? I'm particularly interested in the AP buttons and the dual altitude knob on the MFD. Thx, Al
September 18, 20214 yr " support for mapping G1000 controls like the FMS double encoder knob/pushbutton, and the MFD's range knob." I use the external x-touch mini USB controller from Behringer (originally a midi input device only 55 € on Amazon) which has 8 external knobs and 16 buttons that can be programmed and mapped to MSFS aircraft with "Axis and Ohs" software (15 €) from Lorby. it is very helpful also for VR pilots as you don't see nor use the keyboard, and it is easier to touch and feel buttons and dials than mouse and keyboard. turning dials instead of hitting tiny mouse click spots in turbulence is much more intuitive. it requires some getting used to though, reading of manuals and watching youtube lessons helped me too. https://www.avsim.com/forums/topic/607192-axis-and-ohs-and-behringer-x-touch Edited September 18, 20214 yr by turbomax AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
September 18, 20214 yr 25 minutes ago, ark said: Is there a G1000NXi document that describes the support for mapping the G1000NXi controls? I'm particularly interested in the AP buttons and the dual altitude knob on the MFD. Al, we're trying to stay in total alignment with the base sim events, so you should be able to use all of the default AP controls for setting modes and values. If you find some that aren't working as expected please let us know so we can investigate. The only items of note have to do with panels or hardware that wants to READ the selected altitude for display purposes, and we've got a couple notes on that here:https://www.workingtitle.aero/packages/nxi/issues 5800X3D | Radeon RX 6900XT
September 19, 20214 yr 3 hours ago, Waldo Pepper said: Is it possible to map the CDI button? You can switch the CDI mode between GPS and VLOC using FSUIPC7 offset (0x132C). Al Edited September 19, 20214 yr by ark
September 19, 20214 yr 7 hours ago, Waldo Pepper said: Is it possible to map the CDI button? I did it in axis and ohs
September 19, 20214 yr 15 hours ago, devgrp said: I did it in axis and ohs What is the command called in Axis and Ohs?
September 19, 20214 yr On 9/17/2021 at 6:09 PM, xender said: I love your work! That's for sure! Are you going to improve the GNS units too? They need lots of love. I refuse to touch them There are mods for the GNS430 and GNS530 available, from pimarc/pmb. For example here is the github link for the 530: https://github.com/pimarc/pms50-gns530 Rhett 7800X3D ♣ 96 GB G.Skill Flare ♣ Gigabyte 4090 ♣ Crucial P5 Plus 2TB
September 20, 20214 yr 7 hours ago, Waldo Pepper said: What is the command called in Axis and Ohs? TOGGLE_GPS_DRIVES_NAV1
Archived
This topic is now archived and is closed to further replies.