December 1, 20214 yr 4 hours ago, bugbee said: "Try to delete the "m" files.", Didn't work, same problem, some switches don't work, like battery. Try your mouse wheel to flip the switches. I also had the same issues until someone pointed this to me. Sincerely, Dennis D. Müllert System Specs: MoBo: MSI MAG X870 Tomahawk WiFi ATX AM5. CPU: AMD Ryzen 7 9800X3D. Memory: 128GB Corsair Vengeance DDR5-5600 CL-40. GPU: 24GB Asus TUF Gaming OC GeForce RTX 4090. Monitor: LG UltraGear+ 45" curved OLED. Power Supply: Corsair 1500 Watt 80+ Platinum ATX. HD: 2TB Sabrent Rocket NVME SSD. Windows 11 Pro. Flight Sim Hardware: Joystick: Thrustmaster T16000M. Rudder Pedals: Thrustmaster TPR Pendular Pedals. Yoke: Honeycomb Alpha. Throttles: Honeycomb Bravo. Controller: XBox Controller
December 1, 20214 yr The problem is known (and fixed) and affects only the marketplace version of the CRJ. https://forum.aerosoft.com/index.php?/topic/168475-dont-update-crj-until-new-fix-is-out/&do=findComment&comment=1064163 Edited December 1, 20214 yr by GEKtheReaper Gerald K. - Germany AMD 7800x3D / ASUS ROG X670E-Gaming / ASUS Strix RTX 3090 OC / 64 Gb RAM GSKILL. "Flightstick" = X56 HOTAS RGB Logitech
December 1, 20214 yr 1 hour ago, GEKtheReaper said: The problem is known (and fixed) and affects only the marketplace version of the CRJ. https://forum.aerosoft.com/index.php?/topic/168475-dont-update-crj-until-new-fix-is-out/&do=findComment&comment=1064163 It's not fixed? It will be fixed "soon".
December 1, 20214 yr 15 hours ago, rickjake said: After updating, some toggle switches are inop. Including the battery switch. Tried uninstalling and re-installing did not fix the problem. Everything was working before the update. except for the HUD, but I don't use it. Noticed at least one other person has the same issue on the Aerosoft Forum. Looks like this plane is grounded for a while. At least for me. Yes and rather than offer ANY insight or link another related topic, they close the thread. Some things never change and support for the CRJ is one of them! I managed to fix the inop switches by running a repair on my MSFS installation. They closed the thread too fast for me to even respond how I fixed it... Their loss.
December 1, 20214 yr 11 minutes ago, JasonPC said: Yes and rather than offer ANY insight or link another related topic, they close the thread. Some things never change and support for the CRJ is one of them! I managed to fix the inop switches by running a repair on my MSFS installation. They closed the thread too fast for me to even respond how I fixed it... Their loss. This post is a joke right? What more insides did you expect? I told you that the issue has been found, fixed and that it only affected the marketplace version. I then linked you also to the official statement where the DEV apologizes and takes all the blame on himself by mistakingly providing some wronge files to MS. And yes! of course the topic is closed because the issue has been identified and the fix has been already provided to MS. So what else did you expect to get: The exact files that were mixed up, the code lines or what? Jeez man..... Gerald K. - Germany AMD 7800x3D / ASUS ROG X670E-Gaming / ASUS Strix RTX 3090 OC / 64 Gb RAM GSKILL. "Flightstick" = X56 HOTAS RGB Logitech
December 1, 20214 yr 16 hours ago, flyblueskies said: When I press the SCROLL button to call ATC, I get the message "RADIO OFF" and "The electrical systems must be turned on in order to use the radio and speak to Air Traffic Control (ATC)." I am now using the Ready for Taxi mode. make sure you don't have a switch bound to the stock sim Avionics switch ... The Bravo has this in the default config on it's 7th rocker switch and this wreaks havoc on planes that do not have Avionics 🙂EDIT --- AND you found that :).. but on the alpha... Edited December 1, 20214 yr by LesOReilly Les O'Reilly
December 1, 20214 yr 14 minutes ago, GEKtheReaper said: This post is a joke right? What more insides did you expect? I told you that the issue has been found, fixed and that it only affected the marketplace version. I then linked you also to the official statement where the DEV apologizes and takes all the blame on himself by mistakingly providing some wronge files to MS. And yes! of course the topic is closed because the issue has been identified and the fix has been already provided to MS. So what else did you expect to get: The exact files that were mixed up, the code lines or what? Jeez man..... This was before the fix was published... The topic name did not at all reflect what the actual problem was just says "don't update"... It is fixed now yes. Edited December 1, 20214 yr by JasonPC
December 1, 20214 yr Author 19 minutes ago, GEKtheReaper said: This post is a joke right? What more insides did you expect? I told you that the issue has been found, fixed and that it only affected the marketplace version. I then linked you also to the official statement where the DEV apologizes and takes all the blame on himself by mistakingly providing some wronge files to MS. And yes! of course the topic is closed because the issue has been identified and the fix has been already provided to MS. So what else did you expect to get: The exact files that were mixed up, the code lines or what? Jeez man..... welcome to avsim... R9-9950X3D 32G | RTX5090 | 3T m.2 | Win11 | vkb-gf ultimate & pedals | virpil cm3 throttle | tm boeing yoke | pimax super uw | DCS
December 1, 20214 yr 2 hours ago, LesOReilly said: make sure you don't have a switch bound to the stock sim Avionics switch ... The Bravo has this in the default config on it's 7th rocker switch and this wreaks havoc on planes that do not have Avionics 🙂EDIT --- AND you found that :).. but on the alpha... Yep...I went through both the Alpha and Bravo to disable any rocker switches for the CRJ lights, avionics, etc. Then, of course, after words I found Aerosoft forum threads where they discuss the same solutions. Glad they confirmed what I found and, I definitely appreciate your help. PC: AMD 9850X3D, RAM 64GB, Geforce GTX 5090 (32GB), MSFS 2020, MSFS 2024, Pimax Super 50PPD, Quest 3
December 2, 20214 yr Is the CRJ generally working for everyone? Since 1.0.15, I get a CTD shortly after takeoff every single time. Both the 550 and 700. Starting in a ready for takeoff state. I removed all my scenery but it made no difference. [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
December 2, 20214 yr 1 hour ago, odourboy said: Is the CRJ generally working for everyone? Since 1.0.15, I get a CTD shortly after takeoff every single time. Both the 550 and 700. Starting in a ready for takeoff state. I removed all my scenery but it made no difference. 1.0.15 is working for me. I just completed a flight from KCLE to KCLT with both SIDS and STARS. I used the CRJ 550. PC: AMD 9850X3D, RAM 64GB, Geforce GTX 5090 (32GB), MSFS 2020, MSFS 2024, Pimax Super 50PPD, Quest 3
December 2, 20214 yr 6 hours ago, odourboy said: Is the CRJ generally working for everyone? Since 1.0.15, I get a CTD shortly after takeoff every single time. Both the 550 and 700. Starting in a ready for takeoff state. I removed all my scenery but it made no difference. Check the nVidia driver topic here on AVSIM. https://www.avsim.com/forums/topic/611235-warning-regarding-the-new-nvidia-49709-drivers/ Edited December 2, 20214 yr by GEKtheReaper Gerald K. - Germany AMD 7800x3D / ASUS ROG X670E-Gaming / ASUS Strix RTX 3090 OC / 64 Gb RAM GSKILL. "Flightstick" = X56 HOTAS RGB Logitech
December 2, 20214 yr 8 hours ago, odourboy said: Is the CRJ generally working for everyone? Since 1.0.15, I get a CTD shortly after takeoff every single time. Both the 550 and 700. Starting in a ready for takeoff state. I removed all my scenery but it made no difference. Yes all variants are working for me. Seems like a messed up installation for you, I'd say delete and reinstall the CRJ (make sure to also delete all "M"-files, I think someone on page 1 talked about where to find them). For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
December 2, 20214 yr 7 hours ago, GEKtheReaper said: Check the nVidia driver topic here on AVSIM. https://www.avsim.com/forums/topic/611235-warning-regarding-the-new-nvidia-49709-drivers/ Not using this driver, but thanks. [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
December 2, 20214 yr 5 hours ago, Fiorentoni said: Yes all variants are working for me. Seems like a messed up installation for you, I'd say delete and reinstall the CRJ (make sure to also delete all "M"-files, I think someone on page 1 talked about where to find them). I did a clean install of 1.0.15. The only 'm' files I have in the root crj directory is the manifest.json. Is that it or should there be more? [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
Archived
This topic is now archived and is closed to further replies.