1 hour ago, flyingscampi said:

Unless you can't make the plane work any other way.

I've used it to fix a stuck cockpit (post last update), and the mouse problem (post this update), and it takes 5 minutes to delete the files.

 

Your solution has zero to do with this 737 Update or fixing it. Many have wasted a great deal of time after this update , deleting everything, and then realizing it accomplished nothing.

 

Edited October 26, 20241 yr by Bobsk8

1 hour ago, Bobsk8 said:

Back to Normal..

 

 

The -700 is also listed now.

However, it still gives the same problem (CDU navdata out of date) on my setup (-600 and -700).

2 minutes ago, vonmar said:

The -700 is also listed now.

However, it still gives the same problem (CDU navdata out of date) on my setup (-600 and -700).

Where did you see the navadata is out of date, the FMC or the Tablet. The fix said to ignore what the tablet says. 

I must have been lucky with this one, worked fine straight away. NavData downloaded through the tablet, didn't need to touch Navigraph one way or the other.

G

14 minutes ago, Bobsk8 said:

Where did you see the navadata is out of date, the FMC or the Tablet. The fix said to ignore what the tablet says. 

I followed the PMDG forum post which said not to use the Tablet.

Out of date was on the CDU.

 

Edit: Have you used the NG APP to remove / then Install the -700 Airac?

Do you know the Path to the Navdata?

 

Edited October 26, 20241 yr by vonmar

2 minutes ago, vonmar said:

I followed the PMDG forum post which said not to use the Tablet.

Out of date was on the CDU.

 

Did you update it with the Navigraph Hub after you installed the fixed version?

5 minutes ago, Bobsk8 said:

Did you update it with the Navigraph Hub after you installed the fixed version?

Thanks for the reply.

Here is what I did:

PMDG post:
https://forum.pmdg.com/forum/main-forum/general-discussion-news-and-announcements/333216-26oct24-emergency-737-notam-all-737-pilots-please-read/page2


Today, 16:00
I still have the problem.

What I did:
Full Uninstall/Install PMDG store purchase) resulting in all ok with cycle 2204 (PMDG737-600 and -700).

Now I seen Navigraph Hub is back for PMDG737-600 and -700.

So, I first Updated via PMDG Ops center for -600 and -700 (no errors).

Next I updated Airac using Navigraph Hub (no errors).

Started MSFS, checked the CDU and back to the same problem (navdata out of date).

At this point I would like to know the Path to where the NG Airac cycle went to so I can verify it loaded.
Vaughan Martell KDTW PP-ASEL

33 minutes ago, Bobsk8 said:

Your solution has zero to do with this 737 Update or fixing it. Many have wasted a great deal of time after this update , deleting everything, and then realizing it accomplished nothing.

 

Just trying to help someone who seemed to have tried everything. I won't bother in future if it's going to word not allowed you off.

14 minutes ago, vonmar said:

Thanks for the reply.

 

Here is what I did:

PMDG post:
https://forum.pmdg.com/forum/main-forum/general-discussion-news-and-announcements/333216-26oct24-emergency-737-notam-all-737-pilots-please-read/page2


Today, 16:00
I still have the problem.

What I did:
Full Uninstall/Install PMDG store purchase) resulting in all ok with cycle 2204 (PMDG737-600 and -700).

Now I seen Navigraph Hub is back for PMDG737-600 and -700.

So, I first Updated via PMDG Ops center for -600 and -700 (no errors).

Next I updated Airac using Navigraph Hub (no errors).

Started MSFS, checked the CDU and back to the same problem (navdata out of date).

At this point I would like to know the Path to where the NG Airac cycle went to so I can verify it loaded.
Vaughan Martell KDTW PP-ASEL

Try this.. Not sure if this is correct or not. 

 

C:\Users\users name \AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\pmdg-aircraft-738\work

Just now, flyingscampi said:

Just trying to help someone who seemed to have tried everything. I won't bother in future if it's going to word not allowed you off.

I read about 10 posts on the PMDG  forum that said they tried exactly what you stated and it did not work, and they wasted their time. Just trying to suggest folks don't waste their time, that's all, Sorry it bothers you. 

25 minutes ago, Bobsk8 said:

Try this.. Not sure if this is correct or not. 

 

C:\Users\users name \AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\pmdg-aircraft-738\work

I do not have the -800 (738)

However i see the correct Navdata files dated 10-24-24 with the correct cycle in this path:

AIRAC cycle    : 2410
Version        : 1
Valid (from/to): 03/OCT/2024 - 31/OCT/2024

 

C:\Users\Mynamehere\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\pmdg-aircraft-736\work\NavData

I have Unintalled the -600 and -700 to test again.

This time I will only install the PMDG-600 (cycle 2204) for further testing.

1 hour ago, Gazzareth said:

I must have been lucky with this one, worked fine straight away. NavData downloaded through the tablet, didn't need to touch Navigraph one way or the other.

G

Same here, no issues at all. Very strange.

1 minute ago, Simselli said:

Same here, no issues at all. Very strange.

The first three times I tried to update it through the tablet, it wouldn't update. The 4th time is worked. ?? Go figure.

 

1 minute ago, Bobsk8 said:

The first three times I tried to update it through the tablet, it wouldn't update. The 4th time is worked. ?? Go figure.

 

I updated the PMDG op's manager a few days before as they notified of the coming update, on release i just went into the EFB on each version of the 737, and they all updated fine. I then checked afterwards when folk started reporting issues to see if i still had listings in the Navigraph Hub, and they were gone as expected.

59 minutes ago, Bobsk8 said:

The first three times I tried to update it through the tablet, it wouldn't update. The 4th time is worked. ?? Go figure.

 

Quick update:

I have now Uninstalled -600 and -700 then installed -600 from PMDG.com Download

737-600 is working great (MSFS2020) with the old Navdata Airac2204
Old table v 1.6.0 working ok

What I see in the AIRAC Paths for Navdata:


Airac 2410 3/oct24 31oct24 was never removed when I uninstalled PMDG:
C:\Users\MyNameHere\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\pmdg-aircraft-736\work\NavData



Airac 2204 apr21 may19/22 from currently downloaded/installed PMDG737-600
This shows up on my CDU now and no problems.

D:\WpSystem\S-1-5-21-3919830846-3555096354-194503561-01\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Community\pmdg-aircraft-736\Config\NavData

I have not Updated PMDG to the new version via Ops Ccenter.
I have not touched Navigraph HUB.
The Tablet MAP and Simbrief are Ok.