I am finding that MSFS 2024 is not 'Profile Following' my custom profiles for the Honeycomb Alpha and Bravo.  I set up my controls, after choosing say the 152 aircraft, creating duplicates for general and airplane as required.  

I save them and even press the "Set as Default" option.  As soon as I restart the sim the 152, 172, 737 etc all resort to using the default "Alpha Flight Controls 2024 Transversal" profile.  I have to always go into the controls and manually select the correct profile (which still shows as having the default option enabled).  Why on earth are they not linking to the aircraft?  Even if I do a test and select "Apply to all Aircraft" its the same problem.  Windows and the sim have been completely reinstalled a couple of days ago and it did not help.  No response to my post on the matter on the official forums.

Same here, seems to me like a new bug introduced with latest patch. Pre-flight checklist now starts with "correct controller profile loaded" 😁.

hi, same issue here with my Tobii profile... if anybody can help.

Same here, I have spent many, many hours trying to resolve this issue with Honeycomb products; a, b, c. What a pain & time killer. Must configure or select my profile each time boot computer or switch aircraft. I agree with some, work basic flight sim stuff first!!!!!!! Sorry, just venting!!!!!!!!!! 

Noticed 2 days ago my rudder all of sudden was really twitchy, as of the curve I had set was gone.
Went into controls only to find that MFG profile was replaced by the default Rudder profile (all other personal profiles were still there). The axis was still defined but the curve had gone.
Scrolled to the left and right through the profiles but no more MFG Rudder profile.
MS Asobo... what have you done with it?

1 hour ago, Lange_666 said:

Noticed 2 days ago my rudder all of sudden was really twitchy, as of the curve I had set was gone.
Went into controls only to find that MFG profile was replaced by the default Rudder profile (all other personal profiles were still there). The axis was still defined but the curve had gone.
Scrolled to the left and right through the profiles but no more MFG Rudder profile.
MS Asobo... what have you done with it?

My custom control profiles are still there, the problem is they are not loading alongside the aircraft which I had assigned them to.  I know immediately when I press the button on my Alpha to get into the cockpit, and it doesn't work.  Extremely frustrating constantly having to manually go to the controls menu and reselect the correct profile for all the controllers.  I know from watching 'Sim Hangers' tutorials on controller set up how it is supposedly meant to work.

Edited December 30, 20241 yr by cj-ibbotson

I think a problem arises when you try to make that profile the default profile. Just make a new profile for the specific aircraft and save it with that aircraft. Don't make it default, that seems to mess up the sim. I have created an airplane profile, a joystick profile and a throttle profile for my Fenix Airbus and save it only to those aircraft. and they load every time.

Lee

Edited December 30, 20241 yr by Midnight Music

2 hours ago, Midnight Music said:

I think a problem arises when you try to make that profile the default profile. Just make a new profile for the specific aircraft and save it with that aircraft. Don't make it default, that seems to mess up the sim. I have created an airplane profile, a joystick profile and a throttle profile for my Fenix Airbus and save it only to those aircraft. and they load every time.

Lee

I will give that a try though fairly sure I never set the profiles as default at first yet they never reloaded after a new sim start. I'll try making a duplicate and test it thanks

17 hours ago, Midnight Music said:

I think a problem arises when you try to make that profile the default profile. Just make a new profile for the specific aircraft and save it with that aircraft. Don't make it default, that seems to mess up the sim. I have created an airplane profile, a joystick profile and a throttle profile for my Fenix Airbus and save it only to those aircraft. and they load every time.

Lee

I did a test this morning setting up new profiles and NOT setting them as default.  Sadly it made no difference, the sim went back to the default profiles for all my controllers on a sim restart.  I have also noticed any sensitivity adjustments, especially essential on the rudders, gets reset after a sim restart.  All despite pressing the save button and waiting on the spinning circle to disappear.  Patience is starting to wear and enjoyment for 2024 is quickly disappearing.  

Then there's some other setting in your setup causing problems. I have nothing like that going on. I always get my selected settings loaded with each aircraft I select and load. I hope you can find what is causing it. It would certainly be good for all of us to know. 

Lee

31 minutes ago, Midnight Music said:

Then there's some other setting in your setup causing problems. I have nothing like that going on. I always get my selected settings loaded with each aircraft I select and load. I hope you can find what is causing it. It would certainly be good for all of us to know. 

Lee

I am seeing similar issues on the official forums with people who use very virtual controllers. Their issues are with very itself but profiles reverting to the standard msfs profiles on sim restarts. I need very and Authentakit to fix sloe elevator trim wheel on the Bravo. Will remove vJoy as a test

I have this same issue, but only on one controller, my Fulcrum One Yoke.  I learned how just to set up the controller on first flight of the day as part of pe flight.

I also noticed that my CH rudders pedals are not staying connected when I restart 2024. I have to constantly replug the USB connection and readjust the profile setting that I set as default before last update. I thought I had a connection issue until I tried 2020 and everything worked as should.

I confirm exactly the same problem. But in addition even when I select manually the previously saved profile several of the bindings have disappeared and I have to apply them again. Furthermore if I click "apply to all aircraft" on some of my bindings the sim immediately crashes.

I must say my dim view of these control setups have not changed, even if they worked within their own supposed rules. Having three separate layers of controls per aircraft is a sure way to create bugs and it's no wonder they are unreliable. I gave the system a reasonable time to adjust but I think it is delusional to think it better than in FS2020, where one line of controls is easily managed, easily edited, easily changed and less can go wrong. The elegant, simple solution is always the best.

Guys I think I have it sorted and have carried out many tests, selecting different aircrafts and configurations, plus restarting the sim many many times.

Help came from the official forums and a referral to a post saying to delete the Cloud Saves.  You will however loose your flight hours and all your settings including controllers.

It was worth the risk as I was getting fed up with the sim defaulting all the time to default profiles.

 

Instructions are here:

https://flightsimulator.zendesk.com/hc/en-us/articles/17060350083612-How-to-delete-a-cloud-save-to-fix-some-loading-or-crashing-issues-Crashing-on-the-identity-screen-spawning-inside-buildings

 

Chris