July 12Jul 12 Commercial Member 2 hours ago, cyyzrwy24 said:Tried on Installer and also when I launch Sim.You can't do it from the installer anymore, it's done only from the menu, by double-click on the hotkey in the menu, left of the gsx logo in the black band. Umberto Colapicchioni http://www.fsdreamteam.com FSDT on Facebook
July 12Jul 12 4 hours ago, virtuali said:You can't do it from the installer anymore, it's done only from the menu, by double-click on the hotkey in the menu, left of the gsx logo in the black band.That's what I did.... not sure where is the issue.... Alex
July 13Jul 13 I discovered how to avoid the need to hit Continue Pushback and here it is: during the time when the tow connects to the plane and you are starting to wait for the Direction menu to appear one can hit the hotkey to bring up another menu which offers the user the option to Interrupt Pushback. If you choose NO to this option, invariably now the Direction menu appears. If I don't do this step, then must use the Continue Pushback option.Cheers NoelSystem: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Fenix A320, Aerosoft CRJs, I-Fly 737 MAX 8, PMDG 777-200LR, Citation Longitude. BATC, Self Loading Cargo, GSX, UltimateTurbulanceLive
July 13Jul 13 Commercial Member 2 hours ago, Noel said:I discovered how to avoid the need to hit Continue Pushback and here it is: during the time when the tow connects to the plane and you are starting to wait for the Direction menu to appear one can hit the hotkey to bring up another menu which offers the user the option to Interrupt Pushback. If you choose NO to this option, invariably now the Direction menu appears. If I don't do this step, then must use the Continue Pushback option.That's one method, but it's not the normal one and it's a side effect of the still unknown reason why on your system the direction menu doesn't auto-popup, which normally does if the toolbar menu is not completely closed. Umberto Colapicchioni http://www.fsdreamteam.com FSDT on Facebook
July 14Jul 14 20 hours ago, virtuali said:That's one method, but it's not the normal one and it's a side effect of the still unknown reason why on your system the direction menu doesn't auto-popup, which normally does if the toolbar menu is not completely closed.As you know I checked on SLC's Discord and others there reported they experience the same issue, so I shared this 'other method' there as well since quite clearly you don't understand why it behaves the way it does on some other systems. As my daughter says, it's 'all good' now that I can skip that annoyance. Thanks Umberto GSX is a great program and continues improving. Some day I would appreciate it greatly if you can re-enable the ability to open the main GSX menu when the plane spawns to its departure ramp. I used to be able to open the menu then, when I'm outside the plane (before hitting Shift-C), so I could walk up the lovely stairs and walk into the airplane, as would be done by real world pilots who can't simply 'Shift-C' to get into the plane. Here is a short video showing what I'm refering to, in the Fenix 320. Now, when you first launch to outside the plane, the GSX menu will not display--it appears briefly, then disappears when I attempted to open it. Edited July 14Jul 14 by Noel NoelSystem: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Fenix A320, Aerosoft CRJs, I-Fly 737 MAX 8, PMDG 777-200LR, Citation Longitude. BATC, Self Loading Cargo, GSX, UltimateTurbulanceLive
July 14Jul 14 5 hours ago, Noel said:Now, when you first launch to outside the plane, the GSX menu will not display--it appears briefly, then disappears when I attempted to open it.The GSX Menu opens fine for me in that situation, must be something specific to your setup Noel. Cheers, Søren DissingPC: i9-13900K @5.6-5.8 Ghz | ROG Astral RTX 5090 OC | 64 Gb DDR5 @5600 | 1Tb Samsung M.2 980 PRO (Win11), 1Tb Samsung M.2 980 PRO, | 32” ASUS PG32UCDM 240hz 4K | Chaseplane | TM TCA Captain's Edition, Winwing FCU + EFIS L/R, Tobii 5 | Win11 Pro | MSFS 2024 | BA Virtual | PSXT, RealTraffic w/ AIG modelsLaptop: Core Ultra 9 386H @4.9 Ghz | RTX 5090 | 64 Gb LPDDR5x @8533 | 2Tb Nvme | Win11 Pro | MSFS2024
July 14Jul 14 Commercial Member 9 hours ago, Noel said:Now, when you first launch to outside the plane, the GSX menu will not display--it appears briefly, then disappears when I attempted to open it.Yes, this is in fact a bug, it doesn't work on first spawn but if you press shift+c twice, it works. Will be fixed in the next update, of course. Edited July 15Jul 15 by virtuali Umberto Colapicchioni http://www.fsdreamteam.com FSDT on Facebook
July 15Jul 15 13 hours ago, virtuali said:Yes, this is in fact a bug, it doesn't work on first spawn but if you press shift+c twice, it works. Will be fixed in the next update, of course.Thank you for that and I actually noticed this as well. It is a problem though for how I use it and that is because as you may know when in the Fenix A320 the second time you hit shift+c a second time the plane does not respawn to the outside of the plane, you're essentially standing up still in the VC. However, and I hope this works again because it did today: I started at LIPZ and I had not yet updated Simbrief to the current plan, so GSX sees this and displays the red indication in the Simbrief button that the flight plan doesn't match the departure location. In other words, the menu did display on the first attempt, and I could summon stairs then, and did. Perhaps that is why SierraDelta above says it does stay open for him. NoelSystem: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Fenix A320, Aerosoft CRJs, I-Fly 737 MAX 8, PMDG 777-200LR, Citation Longitude. BATC, Self Loading Cargo, GSX, UltimateTurbulanceLive
July 15Jul 15 59 minutes ago, Noel said:Perhaps that is why SierraDelta above says it does stay open for him.Indeed, my test was just a quick load at EGLC with no matching Simbrief plan. Good catch, Noel!! Cheers, Søren DissingPC: i9-13900K @5.6-5.8 Ghz | ROG Astral RTX 5090 OC | 64 Gb DDR5 @5600 | 1Tb Samsung M.2 980 PRO (Win11), 1Tb Samsung M.2 980 PRO, | 32” ASUS PG32UCDM 240hz 4K | Chaseplane | TM TCA Captain's Edition, Winwing FCU + EFIS L/R, Tobii 5 | Win11 Pro | MSFS 2024 | BA Virtual | PSXT, RealTraffic w/ AIG modelsLaptop: Core Ultra 9 386H @4.9 Ghz | RTX 5090 | 64 Gb LPDDR5x @8533 | 2Tb Nvme | Win11 Pro | MSFS2024
July 25Jul 25 how can i stop fsdt live installer from trying to update GSX when i close MSFS 2024? its very annoying since i have a Firewall (Simplewall) it cannot update itself and gives out errors that i have to manually close everytime i close MSFS -.-ImgBB121 hosted at ImgBBImage 121 hosted on ImgBB Edited July 25Jul 25 by Bam2000
July 26Jul 26 18 hours ago, Bam2000 said:how can i stop fsdt live installer from trying to update GSX when i close MSFS 2024?Why have you even got the live installer open when running MSFS24?Live installer should be run let it do it's thing and then close it down. it's not needed when running the Sim. Brian Thomas MSFS2020/24, Intel i9-14900K, GeForce RTX 4070 Ti SUPER Panther OC 16GB GDDR6X, MSI MAG Z790 TOMAHAWK WIFI (LGA 1700) DDR5, Corsair Vengeance RGB 64GB (2X32GB) DDR5 5600MHz, BenQ PD3205U 32” UHD monitor, Win 11 Pro 64-bit,
July 26Jul 26 3 hours ago, BrianT said:Why have you even got the live installer open when running MSFS24?Live installer should be run let it do it's thing and then close it down. it's not needed when running the Sim.I'm not running it?! the window opens by itself when MSFS2024 closes. And then i have to click two times on "OK" and receive an error message that an Update was not possible. I dont use Live Updater at all, i just use the FSDT Installer, but this is now starting by itself when i close MSFS 2024..... Edited July 26Jul 26 by Bam2000
July 27Jul 27 21 hours ago, Bam2000 said:I'm not running it?! the window opens by itself when MSFS2024 closes. And then i have to click two times on "OK" and receive an error message that an Update was not possible. I dont use Live Updater at all, i just use the FSDT Installer, but this is now starting by itself when i close MSFS 2024.....From my admitedly limited knowledge when 2024 is running the only GSX thing running is couatl.exe in the system tray.When you run the FSTD installer (not the live updater) it should say you are on V4.0.9. I would do this after a fresh restart of your PC and without running any other Sim related apps/software. If it's not on v4.0.9 then update it. if it is then click the check button and let it finish it's check it will update anything that wasn't on your local node when it last ran. If you use the seated passengers option you will need to click "Config" then "Disable all" and then "Enable All making sure to use the close button at the bottom of this page. Exit the FSTD installer. Once that's all done you should now at least be upto date and no need for live updater to kick in when you close MSFS24.I've never had this happen and as far as I can tell there is nothing in GSX that would command an update on closing. The hotfixes carried out in sim are literarly just that, small fixes that don't need a full installer.Fire up the sim and before closing, look to see if anything other than coutatl is running if either of the ghsx installers are running then you have something starting them up with MSFS24. Brian Thomas MSFS2020/24, Intel i9-14900K, GeForce RTX 4070 Ti SUPER Panther OC 16GB GDDR6X, MSI MAG Z790 TOMAHAWK WIFI (LGA 1700) DDR5, Corsair Vengeance RGB 64GB (2X32GB) DDR5 5600MHz, BenQ PD3205U 32” UHD monitor, Win 11 Pro 64-bit,
July 27Jul 27 On 7/26/2026 at 10:31 PM, Bam2000 said:I'm not running it?! the window opens by itself when MSFS2024 closes. And then i have to click two times on "OK" and receive an error message that an Update was not possible. I dont use Live Updater at all, i just use the FSDT Installer, but this is now starting by itself when i close MSFS 2024.....you solution is on the fdst forum https://www.fsdreamteam.com/forum/index.php/topic,34450.0.html I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
July 27Jul 27 39 minutes ago, pete_auau said:you solution is on the fdst forumhttps://www.fsdreamteam.com/forum/index.php/topic,34450.0.htmlThanks, but I don't have or had p3d or sode installed on my PC ever, so it seems like I have a different message
Create an account or sign in to comment