September 12Sep 12 Umberto has been busy again...Next GSX update is here:Couatl™ Live update release notesVersion 4.0.22 – September 11th, 2026GSX (all versions) NEW: New gate profile option externaljetways = 1 for stands whose jetways are driven by third-party tech GSX cannot detect (such as iniBuilds KORD): boarding and deboarding run simulated at the jetway, without visible passengers, instead of falling back to stairs and bus.GSX (all versions) Fix: "Complete now" while cargo was still being moved made the loader count the unfinished trip as done and call for another train; it now just packs up.GSX (all versions) Fix: A vehicle leaving on a custom path whose first point sat just behind it drove a tight full loop through its own position before setting off - a baggage train doing this appeared to spin on itself.GSX Pro Fix: The cargo staircase platform stopped up to 20 cm above the door at mid-range door heights; it now stops at the door, and all staircases account for the apron slope between the airplane and the stairs.GSX (all versions) Fix: Several issues that could make ground vehicles either wait on each other forever or ignore each other while moving.GSX Pro Fix: In MSFS 2020, the keyboard hotkey could stay inactive for the whole session after a cold start of the simulator, until Couatl was restarted.GSX (all versions) Fix: A departing baggage train blocked by another vehicle now drives around it, instead of asking to remove passenger stairs it only needed to drive past. SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU7 & P3D v5.3 HF2
September 12Sep 12 Looks like Umberto is preparing for the multi- jetways from Inibuilds and not have the GSX stairs arrive instead.I would be interested in what your experience is now at Inibuilds airports such as KORD and OMDB? SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU7 & P3D v5.3 HF2
September 12Sep 12 4 hours ago, 787flyer said:Looks like Umberto is preparing for the multi- jetways from Inibuilds and not have the GSX stairs arrive instead.I would be interested in what your experience is now at Inibuilds airports such as KORD and OMDB?the airport profiles will need to be updated before it can be tested. Edited September 12Sep 12 by Tuskin38
September 13Sep 13 Just installed the update, and it's borked. Went to activate stairs and an error message pops up and won't proceed. Quite frankly rather than pushing out updates nearly weekly that take several minutes to process and essentially change nothing I ever experience except rarely, I'd much rather he did these less frequently.Addendum: just the install was borked hopefully as I ran the 'check' which appears to be another install and it seems okay so far now. Edited September 13Sep 13 by Noel NoelSystem: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Fenix A320, Aerosoft CRJs, I-Fly 737 MAX 8, PMDG 777-200LR, Citation Longitude. BATC, Self Loading Cargo, GSX, UltimateTurbulanceLive
September 14Sep 14 another update just been released 4.0.23 I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
September 14Sep 14 22 hours ago, Noel said:Just installed the update, and it's borked. Went to activate stairs and an error message pops up and won't proceed. Quite frankly rather than pushing out updates nearly weekly that take several minutes to process and essentially change nothing I ever experience except rarely, I'd much rather he did these less frequently.Addendum: just the install was borked hopefully as I ran the 'check' which appears to be another install and it seems okay so far now.It's beta testing. The good thing that those updates are not mandatory. Other than that I have to say that Fenix GSX integration that worked solid for many years, is broken after wave of the updates. Sometimes new update fixes issues, the other day breaks. 9950X3D, X870E ROG CROSSHAIR HERO, Corsair Dominator Titanium 64GB DDR5-6000 PC5-48000, ASUS RTX 5070Ti 16GB, 9100 PRO 4TB Samsung ,990 PRO 4TB Samsung, AX1600i 1600 Watt 80 Plus Titanium ATX, ASUS 360 ARGB EXTREME 360mm Liquid CPU Cooling Kit.
September 16Sep 16 I wish I could roll back. Now often jetways don't connect to my airliners like they always have. And yesterday stairs did not go all the way to the plane, just like the jetway today, at different airports, airplanes. I take it back again...it is borked! Edited September 16Sep 16 by Noel NoelSystem: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Fenix A320, Aerosoft CRJs, I-Fly 737 MAX 8, PMDG 777-200LR, Citation Longitude. BATC, Self Loading Cargo, GSX, UltimateTurbulanceLive
September 17Sep 17 5 hours ago, Noel said:I wish I could roll back. Now often jetways don't connect to my airliners like they always have. And yesterday stairs did not go all the way to the plane, just like the jetway today, at different airports, airplanes. I take it back again...it is borked!jetways are connecting fine here.
September 17Sep 17 On 5/21/2026 at 1:39 AM, qqwertz said:Can anyone tell me if GSX Pro now sets the number of passengers and crew correctly, according to, say, a Simbrief flight plan? I just don't want to see two pilots, four flight attendants, and 3 passengers board a Cessna.Why do you have Airliner crew and Pilots activated for a flight with a Cessna? You can turn that off in the settings part of the app. B450 Tomahawk Max / Ryzen 7 5800x3D / RTX 3060ti 8G / Noctua NH-UI21S Max Cooling / 32G Patriot RAM / 1TB NVME / 450G SSD / Thrustmaster TCA & Throttle Quadrant / Xiaomi 32" Wide Curved Monitor 1440p 144hz
September 17Sep 17 11 hours ago, Tuskin38 said:jetways are connecting fine here.Actually, I learned after that post why the jetway didn't connect, but this is a bug as well: you know the square you hit to use airstairs? Well, it stated STAIRS DISABLED, and yet a stair auto-connected to the aft door and it got in the way of the jetway connecting. I use the auto-connect option in GSX because I enjoy walking up stairs and into the Fenix. That was a SKRG, and maybe there is a GSX profile that would fix this: Edited September 17Sep 17 by Noel NoelSystem: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Fenix A320, Aerosoft CRJs, I-Fly 737 MAX 8, PMDG 777-200LR, Citation Longitude. BATC, Self Loading Cargo, GSX, UltimateTurbulanceLive
September 17Sep 17 31 minutes ago, Noel said: That was a SKRG, and maybe there is a GSX profile that would fix this:The parking spots don't look right - positioned too far forward in comparison to where the jetway is positioned, so with that length of jetway bridge i would bet the jetway isn't able to connect to 1L. Try moving the parking spots and stop signs backwards so the jetway has a chance to connect. SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU7 & P3D v5.3 HF2
September 17Sep 17 Jetways are connecting fine for me, but stairs are not. Often they stop a few feet away from the door, and sometimes they connect, but then disconnect and move away for no reason.
September 17Sep 17 yeah I'm having issues with the stairs as wellthey pull up, but don't extend. Edited September 17Sep 17 by Tuskin38
September 18Sep 18 As far as I know, stairs do only appear (when stairs are disabled), if GSX doesn't recognize that a jetway is available at that position. And that is often caused by a wrong/offset stop position - either by the pilot (stops at wrong point) or by the GSX profile (stop position is set wrong).
September 18Sep 18 1 hour ago, Watsi said:As far as I know, stairs do only appear (when stairs are disabled), if GSX doesn't recognize that a jetway is available at that position. And that is often caused by a wrong/offset stop position - either by the pilot (stops at wrong point) or by the GSX profile (stop position is set wrong).I'm talking about parking postions without jetways - the stairs often don't connect properly now, and it was working fine before the latest update.
Create an account or sign in to comment