jonny

I think it is something wrong with lever 1 and 2 at my CH throttle quadrant. When I use lever 5 and 6 as throttles it works OK. Lever 1 and 2 is used a lot more than lever 5 and 6. I have to find spare pots for lever 1 and 2! Thank's for all help!

The method you describe is the same as John Cook's and I have done exactly as descibes but reverse engine does not works. I am using P3Dv2 and KingAir 350. Are you using P3Dv2? I have done the settings as you have and it works OK with King Air 350 in P3Dv2. But the way 'Pivot' and John Cook describe don't work for me in P3D!

I am using zone of the throttle lever at the throttle quadrant. Trying to use the FSUIPC Joystick Calibration page and page 3 of 11: separate throttles per engine, and set Reverse - Idle (2 values) - Max values. Reverse engine doesn't works. I have it to works by not use of the Idle settings in Joystick calibration and set up a range for action at the page Axis Assignment. At the very back position of the lever I sent control Throttle1dec when range is entered and send Throttle1Cut when exited range. It works in my Learjet45 in FSX. It seems very hard to get the throttle lever to handle reverse engine by use of Idle values at the page Joystick Calibration only. Mybe it depends on the aircraft?

Hi, I am trying to get reverse throttle at my CH Throttle Quadrant for the default aircraft Beech King Air 350 but it fails all the time. I follow the: Configuring FSUIPC with CH USB Yoke ... ... .. by John Cook but it fails all the time. Reverse will not works otherwise the throttle works OK. What am I doing wrong?? Is there any flightsimmer who has done this settings and with luck? If so will you present part of your FSUIPC4.ini file!

As far as I know you can remove autogen from any place. My problem was near an airport but outside the airport area. You can build sceneries everywhere. I adjust the area around my sommerhouse and it works very well. Try it!

I had a similar problem and it was solved at this link: http://fsdeveloper.com/forum/threads/remove-hide-object-outside-airport-area.434632/ with use of freeware ADE165.

Hi, Here are some good links: Look for textinfogauge40.zip here at avsim.net. There is a good document with XML tutorial. You have Simple Panel Design at http://simviation.com/1/browse-Panel Design-101-0 also a good tutorial. Blackbox3 is a wery nice tolls to test gauges, http://www.robbiemcelrath.com/fs/blackbox/download

Maybe Destination Finder from http://www.flightsim.com/vbfs/fslib.php?searchid=20320253 filname is destfn20.zip

Go to http://buffaloairwaysvirtual.com/index.php/Frontpage and register. Lots of freeware for both FS9 and FSX.

Check http://www.hidmacros.eu/ you can do a lot with HIDMacros.

Check David Marshall's tips_and_tricks_21.zip at http://library.avsim....php?DLID=83646 page 22 'Turn 4 into 1' Check also http://www.hermit.supanet.com/

I think a SSD is of no use for FSX. I build my FSX-computer with almost the same components. And FSX and FS9 are at my SSD disk. However the startup of FSX take some time. And when running I can't see any better performance. But you should use one disk for OS and another for FSX/FS9. What is your OC settings? My current settings are: Bus speed = 103.0 MHz Multiplier = 42 Core Voltage 1.300 V Max temp is about 50-55 C. I am using watercooling. Motherboard is ASUS P8Z77-V PRO, CPU i5-2500K Core speed is 4326.02 MHz with current settings.

What is this? Where do I find this points?

What's the main differens between the Ti card and non Ti card? Jonny

Why use such expensive Video: EVGA GeForce GTX670FTW 2048MB? As far as I know FSX will run perfect at a cheeper card.

How do you connect 3 monitors to one card? Or will it be two cards?

Something strange has happend to my FS9!The default Boeing 737 use SimIcons.cab for the icons on the 2D-panel.But now I cant see the icons any more. When I switch to SimIcons1024.cab I can see the icons again.I use FSPanelStudio to shift the icons and in FSPanelS I can see the icons from both Simicons.cab and SimIcons1024.cab.My OS is WinXP 32bit.I do have same problems in other panels, I can see the gauges in FSpanelStudio but not in FS9.What has happend?Or what should I do to see the gauages again?/Jonny

Try Shift + Z again and again and again!

I agree to 110%!/Jonny

Nobody has mentioned FS Global 2010. Why?

I have seen it, no help!

I intend to do a small fire adventure in FS9. I have found two great things for this.Massimo Taccoli's CL415 great water bomber and Scott Gridley and Ron Jeffers FS-Blaze to create a fire where you want the fire. The program works great separately but together it's not so great.When the water bomber come close to the fire the 'smoke' from the water drop is no longer visible.There are som hints on the net, move the 'smoke' section to the 'light' section and this vill help a little. But the 'smog' is red and you have to fiddle with the lights!Aren't there anyone who has a better solution to this problem?Jonny

As far as I remeber Pete was away until 17 oct.And as far as I remeber the name has to be the same for both FSUIPC and WideFS. The email can be different.I think this is clearly declared in the advertisment.

Hi Javier!And thank's very much, the code works perfect and I am very happy!Sorry, it is almost impossible to find a good manual for XML-gauge syntax./Jonny

Thank's for the answers so far.My code is for FS9.I do think my problem has to do with the <Case>..</Case> block. When I have an <Image..> in the block all works fine. But when I try to write a text in the gauge nothing happend. I try to find somthing about this in tutorials on the net and in MS SDK but I can't find any detailed manual.Anyone with a good hint!!??/jonny