WGP

I've found this airport as freeware here. Looks like work in progress but might be worth checking out. https://flightsim.to/file/365/ekvg-vagar-airport-faroe-islands

I'm going to get MSFS 2020 and if it's better than x-plane I'll be switching. What's been shown looks impressive however I can't say for sure until I've tried it myself. I already dumped P3D some time ago.

Hi Dave Just wanted to report a tower to ground taxi loop on arrival from KFRG to KACY. I checked the airport and taxiways all look ok so I wouldn't expect that to be an issue. After clearing the active runway and requesting taxi I kept being directed to contact between ground and tower. Last comms from Pilot2ATC. Also flight plan information below. Cessna One Victor Bravo good evening . Radar Contact. Continue ILS to Runway Three One Call when established on Final ~Continue ILS to Runway Three One Will call when established on final Cessna One Victor Bravo ~Cessna One Victor Bravo established on final for ILS runway Three One Cessna One Victor Bravo established on Final for ILS Runway Three One; Cessna One Victor Bravo Whinds are calm Cleared to Land Runway Three One ~Cleared to land runway Three One Cessna One Victor Bravo Cleared to Land Runway Three One Cessna One Victor Bravo; Cessna One Victor Bravo exit runway when able. ~Clear of Active Cessna One Victor Bravo clear of Active Cessna One Victor Bravo; Cessna One Victor Bravo Welcome to ATLANTIC CITY INTERNATIONAL contact ground on One Two One Point Niner, enjoy your evening ~Ground on One Two One Point Niner Cessna One Victor Bravo Ground on One Two One Point Niner Cessna One Victor Bravo; ~Cessna One Victor Bravo request taxi to General Aviation Ramp Cessna One Victor Bravo Request Taxi to General Aviation Ramp; Cessna One Victor Bravo Contact ATLANTIC CITY Tower on One Two Zero Point Three for taxi clearance. ~Tower on One Two Zero Point Three Cessna One Victor Bravo Tower on One Two Zero Point Three Cessna One Victor Bravo; ~Cessna One Victor Bravo request taxi to General Aviation Ramp Cessna One Victor Bravo Request Taxi to General Aviation Ramp; Cessna One Victor BravoContact ATLANTIC CITY Ground on One Two One Point Niner for taxi clearance. ~Ground on One Two One Point Niner for taxi clearance. Cessna One Victor Bravo Ground on One Two One Point Niner for taxi clearance Cessna One Victor Bravo; ~Cessna One Victor Bravo ready to taxi Cessna One Victor Bravo Ready to Taxi; Cessna One Victor Bravo Contact ATLANTIC CITY Tower on One Two Zero Point Three for taxi clearance. ~Tower on One Two Zero Point Three Cessna One Victor Bravo Tower on One Two Zero Point Three Cessna One Victor Bravo; ~Cessna One Victor Bravo request taxi to the Gate Cessna One Victor Bravo Request Taxi to the Gate; Cessna One Victor BravoContact ATLANTIC CITY Ground on One Two One Point Niner for taxi clearance. ~Ground on One Two One Point Niner for taxi clearance. Cessna One Victor Bravo Ground on One Two One Point Niner for taxi clearance Cessna One Victor Bravo; ~Cessna One Victor Bravo request taxi to the Gate Cessna One Victor Bravo Request Taxi to the Gate; Cessna One Victor Bravo Contact ATLANTIC CITY Tower on One Two Zero Point Three for taxi clearance. ~Tower on One Two Zero Point Three Cessna One Victor Bravo Tower on One Two Zero Point Three Cessna One Victor Bravo; FLIGHT PLAN DETAILS I 1100 version CYCLE 1910 ADEP KFRG DEPRWY RW01 SID DEEZZ5 SIDTRANS DEEZZ ADES KACY DESRWY RW31 APP I31 NUMENR 4 1 KFRG ADEP 80 40.72878 -73.41341 3 JFK DRCT 6000 40.63289 -73.77139 11 DIXIE DRCT 6000 40.09937 -74.16449 11 BRIGS DRCT 4100 39.52353 -74.13879 1 KACY ADES 75 39.45758 -74.57716

I like a lot of things in X-Plane and ATC isn't one of them. It's very limited and frustrating at the best of times. I wouldn't expect to see any changes to ATC for awhile, maybe something for XP11 whenever that happens.

Not sure if it's been mentioned yet but if not check out the RealAir Legacy.

I use Malwarebytes after using the free version found viruses not picked up by other programs then upgraded to premium for just $25 per year which gives a license for up to 3 PC's and active protection. I rarely notice it's running unless a blocked notification shows up.

Thanks, I didn't know this was out.

I'm looking forward to a native P3D version.

I have this aircraft and have never found the prop sync toggle button.

I don't have these but reviews of these I've seen say they are great. http://mfg.simundza.com/mfgcrosswind.php they also have a video of their pedals here Edit: sorry just re-read your post and see you are already looking at these :blush: Dslyecxi who covers ARMA 3 content did a review of these.

Thanks jjmp that absolutely helped. I'll have to RTFM next time.

I'm wondering if anyone else is having issue with the PC12 accelerating on start up. I have the brakes on but it pushes the aircraft forward anyway. I have checked all my axis settings yet this still happens every time I start up the aircraft. This only happens for about 5-10 secs where the engines pulls the aircraft forward even with the parking brake applied. I've tested the condition lever various positions, disabled prop pitch but still having this issue. I don't have any add ons except for the free version of fsuipc, and some obrx scenery. I have yet to see anyone experiencing the same issue. I don't have problems with any other aircraft just this one. Looking for ideas to further troubleshoot this problem.

Yes with both quadrants I have 4 black lever knobs, 3 prop and 3 mixture

I have one of the additional USB throttle quadrants. I'm pretty sure the additional knobs came with it and not the yoke + quadrant. I have these addition to the 2 throttle, 2 prop and 2 mixture level knobs. Extras 2 x black throttle knobs, 1 x red mixture, 1 x blue prop and 1 black 4 x lever handle that would co-ordinate 4 of the levers at a time. Hope this helps.

1

I was able to download without a problem so link seems fine.

Haven't tried it yet but something I've been looking for. Looks great. Thanks

Might be worth waiting for a native P3D installer for the Turbine Duke. On their website...

This is more for scenery developers to create lego brick airports that can be rolled into X-Plane releases so we can stop seeing naked airports. I'm looking forward to that.

I'll buy it but only cause I don't own it already!

I don't have FSX only P3D. I only had the FSX version less than a week and then purchased the new P3D version. I followed their instruction on how to get the rebate and had be refunded the difference within a couple of hours. No issues, no problems. Just sent them my proof of purchase and it was done.