They actually included a VC, that's the stuff to be flown in 2010. :( No need to go "flat screen" since FS2004.

Yeah right. You know, good 2010 VCs don't have FLAT glareshield/MCP anymore... If you see what I mean... :(

I think I'll never understand those 2D guys. Complaining about "flat" glareshield buttons in a VC they don't use for whatever reasons.Did PMDG announce to deliver an outdated 2D panel with their NGX btw? Must be real pain (or just consistent) if not, like in the J41. Does somebody know a current (car) racing simulator with 2D panels or is this "stuck to good old times" a flight sim phenomenon only? Just wondering ...No Offense if you don't like VCs but I'm at least smiling every time about the "good reasons" for this decision. Some multi monitor setups might be the only one that comes to my mind.Considering the glareshield: 3D buttons there would be fine but I'll like the product (and fly it in VC) even without them. Tough guy, huh?

It's about time Scoob... Really. Better late than never eh? :(

So, Scoob posts that a widescreen version is in the works, and in return you have to make a sarcastic comment.

Maybe we can crank up this thread again. It's now november, how is Volume2 of the E-Jets doing with SP1 out for a week or so? I noticed that the 16:9 ws was included for the 2d panels with a selection at the config level among other things, but it didn't say it was for fsX like some of the other items. Sure hope fsX is receiving at least the attention of FS9 version or volume or v2. Let's see v2 is just after Vr, or am I confused again? Sp1 fixed the following:>fsX: the handbreak now moves, (maybe Hand Brake?)>fsX 195 the front cargo was lit during the evening>fsX the N1 value showed 1-2% smaller value than the actual>the Autobrake switch didn't go into the OFF position after braking>we had too much nose up attitude at landing>fsX at higher altitude the HUD was misalignedI>non normal display on the EICAS remain cluttered for 30 seconds>widescreen support (2d). Now the 16:9 option is selectable from the configurator (new graphics was added too)>fixed the altitude crossing entering http://forum.iemit.c...?g=posts&t=4995 >no more locked ALTN airport entry after importing a flightplan http://forum.iemit.c...g=posts&m=27941Would like to hear to some Pireps. Thanks.Ray

I noticed that the 16:9 ws was included for the 2d panels with a selection at the config level among other things, but it didn't say it was for fsX like some of the other items.

the widescreen is for both FS9 and FSX.in the list you have if the sim is not specificly noted the item is for both 9 & X.--

the widescreen is for both FS9 and FSX.in the list you have if the sim is not specificly noted the item is for both 9 & X.--

OK, Thanks Scoob, that's good news.

Maybe we can crank up this thread again. It's now november, how is Volume2 of the E-Jets doing with SP1 out for a week or so? I noticed that the 16:9 ws was included for the 2d panels with a selection at the config level among other things, but it didn't say it was for fsX like some of the other items. Sure hope fsX is receiving at least the attention of FS9 version or volume or v2. Let's see v2 is just after Vr, or am I confused again? Sp1 fixed the following:>fsX: the handbreak now moves, (maybe Hand Brake?)>fsX 195 the front cargo was lit during the evening>fsX the N1 value showed 1-2% smaller value than the actual>the Autobrake switch didn't go into the OFF position after braking>we had too much nose up attitude at landing>fsX at higher altitude the HUD was misalignedI>non normal display on the EICAS remain cluttered for 30 seconds>widescreen support (2d). Now the 16:9 option is selectable from the configurator (new graphics was added too)>fixed the altitude crossing entering http://forum.iemit.c...?g=posts&t=4995 >no more locked ALTN airport entry after importing a flightplan http://forum.iemit.c...g=posts&m=27941Would like to hear to some Pireps. Thanks.Ray

Did they fix the vc ?Vic

EDIT: ok found it now (from my original purchase link)SP1 update is out??Where can i download that from, only i cant find a link on either Wilco or FT websites.Tom

Maybe we can crank up this thread again. It's now november, how is Volume2 of the E-Jets doing with SP1 out for a week or so? I noticed that the 16:9 ws was included for the 2d panels with a selection at the config level among other things, but it didn't say it was for fsX like some of the other items. Sure hope fsX is receiving at least the attention of FS9 version or volume or v2. Let's see v2 is just after Vr, or am I confused again? Sp1 fixed the following:>fsX: the handbreak now moves, (maybe Hand Brake?)>fsX 195 the front cargo was lit during the evening>fsX the N1 value showed 1-2% smaller value than the actual>the Autobrake switch didn't go into the OFF position after braking>we had too much nose up attitude at landing>fsX at higher altitude the HUD was misalignedI>non normal display on the EICAS remain cluttered for 30 seconds>widescreen support (2d). Now the 16:9 option is selectable from the configurator (new graphics was added too)>fixed the altitude crossing entering http://forum.iemit.c...?g=posts&t=4995 >no more locked ALTN airport entry after importing a flightplan http://forum.iemit.c...g=posts&m=27941Would like to hear to some Pireps. Thanks.Ray

EDIT: ok found it now (from my original purchase link)SP1 update is out??Where can i download that from, only i cant find a link on either Wilco or FT websites.Tom

Hey Tom, this is from the feelThere forum for this addon . . "Dear Folks,The SP1 is released and you can get it by re-downloading your product using the same download link you've got upon purchase. "

I did. Purchased it from feelThere site a few hours ago. Made the Intro Flight up to cruise, turned everything off and did a manual emergency landing. I like it. Looking for fsx version repaints now.Ray

I did. Purchased it from feelThere site a few hours ago. Made the Intro Flight up to cruise, turned everything off and did a manual emergency landing. I like it. Looking for fsx version repaints now.Ray

The only useful repaints I can find are Mcphat's and the 'HD' skins are overkill for me. Feelthere used to provide a nice selection of liveries with new releases, however, V2 comes with a very limited number of airlines that 99% of owners would never fly. Please post links if you find some. Thanks.Bob.. :)

The only useful repaints I can find are Mcphat's and the 'HD' skins are overkill for me. Feelthere used to provide a nice selection of liveries with new releases, however, V2 comes with a very limited number of airlines that 99% of owners would never fly. Please post links if you find some. Thanks.Bob.. :)

I have not been able to find anything at all for fsx. Found a half dozen for FS9 but they all need work for fsx. The painter does not have fsx and is not interested in making them available for fsx. I started on a JetBlue livery for the 175. I did notice the actual folder names are 170 and 190. I'm totally new to the Embraer line so I don't even know what the difference are.Ray

I have not been able to find anything at all for fsx. Found a half dozen for FS9 but they all need work for fsx. The painter does not have fsx and is not interested in making them available for fsx. I started on a JetBlue livery for the 175. I did notice the actual folder names are 170 and 190. I'm totally new to the Embraer line so I don't even know what the difference are.Ray

Are you sure you got the EJets V2. ? They should show up under simobjects\aircraft as 'feelThere PIC E175' and 'feelThere PIC E195' ...DJ

Found a half dozen for FS9 but they all need work for fsx.

not sure what this means as a ejet repaint for FS9 will work in FSX. all that is lost are pumpmaps (FS9 doesn't have these) and depending on the painter some FS9 paints may not work with DX10preveiw.IMPORTANT: ejet v1 paints (170 & 190) will not work with the embraer ejets v2 (175 & 195).

I'm totally new to the Embraer line so I don't even know what the difference are.

good summary (besides what is in the manual) -http://en.wikipedia..../Embraer_E-Jets feelThere support forum - http://forum.iemit.com(note: painter's kits are released as-is and without support. Q&A is welcome between painters on the forum.)--

Are you sure you got the EJets V2. ? They should show up under simobjects\aircraft as 'feelThere PIC E175' and 'feelThere PIC E195' ...DJ

Yep, pretty sure. I got them direct from feelThere site yesterday and includes SP1 which is only about a week old. When you get inside the feelThere PIC E175 or E195 folder all the specific files start with 170_ or 190_Scoob, I see a real dullness to the paints that are ported over from FS9. Nothing bright and shiny. Heck, it may be intentional, all the included paints are pretty drab and dirty.BTW, is it legit to ask how to hide the yoke in the VC or is this some kind of inside joke?Ray