January 21, 201511 yr nice. looks like the same can be done with the gns530 with the appropriate panel ident. R9-9950X3D 32G | RTX5090 | 3T m.2 | Win11 | vkb-gf ultimate & pedals | virpil cm3 throttle | tm boeing yoke | pimax super uw | DCS
January 21, 201511 yr Follow on to the above.... here is for the popup. 1. Make a subfolder to your panel folder and call it C2CAR 2. Unzip the contents of the C2CAR.cab file (found in the Gauges folder) into this new folder 3. Open the Toggle10300.xml file (in the new folder) with Notepad. 4. Change <Click>10300 (>K:PANEL_ID_TOGGLE)</Click> to <Click>14401 (>K:PANEL_ID_TOGGLE)</Click> 5. Save the file as "Toggle14401.xml" back into the new folder If you made the changes from the previous instructions, the left bezel of the MFD will now pop up the GTN750, assuming you have a GTN popup window in your panel.cfg file with Ident=14401 which the F1GTN config app should have added for you. Nice job Bert. Try using this and let me know how you like ----gauge04=F1GTN!GTN750VC, 555, 45, 424, 310, UNIT1 Al Williams
January 21, 201511 yr Nice job Bert. Try using this and let me know how you like ----gauge04=F1GTN!GTN750VC, 555, 45, 424, 310, UNIT1 That works fine too, but I really do not need the radio information, since the Collins radios are right next to it.. Also, using the screen in the VC means turning off Instrument Reflections, and even with that, I do not have access to the Direct-to button. So, for me, I'll use the popup for interaction and would like the map screen to look as undistorted as possible.. Bert
January 22, 201511 yr That works fine too, but I really do not need the radio information, since the Collins radios are right next to it.. Also, using the screen in the VC means turning off Instrument Reflections, and even with that, I do not have access to the Direct-to button. So, for me, I'll use the popup for interaction and would like the map screen to look as undistorted as possible.. Good point Bert. Al Williams
January 24, 201511 yr Sorry to come late to the party.... can someone point me to where Carenado said they'll add GTN integration? Did they make any mention of the RealityXP units? Thanks. Z.
January 24, 201511 yr Sorry to come late to the party.... can someone point me to where Carenado said they'll add GTN integration? Did they make any mention of the RealityXP units? Thanks. Z. They haven't yet announced anything, but thanks to Bert we can use it in place of the MFD. Some people have sent a support ticket requesting compatibility. Jordan Ridener
January 25, 201511 yr Sorry to come late to the party.... can someone point me to where Carenado said they'll add GTN integration? Did they make any mention of the RealityXP units? Thanks. Z. Carenado have stated that they intend to provide GTN integration "in the future".. No mention of RXP units. Bert
January 25, 201511 yr No mention of RXP units. that would be a commercial mistake as there are more rxp users around than gtn users? something shiny and new comes along and the poor rxp gets thrown into the trash bin... lol. R9-9950X3D 32G | RTX5090 | 3T m.2 | Win11 | vkb-gf ultimate & pedals | virpil cm3 throttle | tm boeing yoke | pimax super uw | DCS
January 25, 201511 yr that would be a commercial mistake as there are more rxp users around than gtn users? something shiny and new comes along and the poor rxp gets thrown into the trash bin... lol. I think its more to do with future proofing. RXP is not supported in any way and not used in P3D and FSX-SE ZORAN
January 25, 201511 yr The GTN is overall better than RXP . But there's two things bugging me: No DME/radial info when you tune a vor to nav1 and Some gauge instability issues especially when using a navdatabase different than the extremely dated 1106 | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
January 25, 201511 yr Author I think the whole point of the GTN's creation was to replace the RXP units.
January 25, 201511 yr The GTN is overall better than RXP . But there's two things bugging me: No DME/radial info when you tune a vor to nav1 and Some gauge instability issues especially when using a navdatabase different than the extremely dated 1106 Ryan, what database are you using with your GTN ? Ray When Pigs Fly . Ray Marshall .
February 7, 201511 yr So I bit the bullet and purchased the GTN750. i installed it and the trainer. Put Berts mods in with his panel cfg.... Go to FSX - load the Citation and the GTN does not work... I can clisk for the pop up but the screen is blank, cant turn it on...What What am I missing here... Thanks
February 7, 201511 yr Have you used the GTN configure tool? Should be on desktop or start menu? UK P3DV5 and Xplane 11 SimmerPilotEdge I11, CAT11, A-Z (ZLA), A-Z (WUS) System details: Gigabyte P57v7 CF2 17.3" laptop. Kaby Lake i7 7700HQ CPU (averaging 3.4mhz). NVIDIA GeForce GTX 1070 8mb (laptop version), 16 GB of DDR4-2400 RAM, SSD - Samsung 970 Evo 500GB M.2 NVMe, 1TB HDD 7200.
February 7, 201511 yr I see it but what do I do with it? I selected the Citation in the list...Then what?
Create an account or sign in to comment