November 3, 201510 yr It would also be great if Aerosoft would finally release Malaga (LEMG) for FSX. They've had development screen shots up for ages but this project seems to have 'died'..... Anyone have an update? Toni.
November 3, 201510 yr Has someone run MA Oslo at V3.0? I'm considering buying it, but still need to know about V3 possible limitations. Thanks 9950X3D, X870E ROG CROSSHAIR HERO, Corsair Dominator Titanium 64GB DDR5-6000 PC5-48000, ASUS RTX 5070Ti 16GB, 9100 PRO 4TB Samsung ,990 PRO 4TB Samsung, AX1600i 1600 Watt 80 Plus Titanium ATX, ASUS 360 ARGB EXTREME 360mm Liquid CPU Cooling Kit.
November 3, 201510 yr Author It would also be great if Aerosoft would finally release Malaga (LEMG) for FSX. They've had development screen shots up for ages but this project seems to have 'died'..... Anyone have an update? Toni. Couldn't agree more. This project is embarrassing IMHO, I even have a printed booklet from Aerosoft showing this product and that booklet must be 5+ years by now...
November 3, 201510 yr Honestly I'm a bit surprised a huge airport such as CDG hasn't gotten more attention lately from the airport scenery developers considering it's one of the biggest airports in Europe. Funny you should mention this in the same post with Taxi2Gate because they’re actually working on LFPG. EDDM is next from them and LFPG after that. They’ve been quiet for several months now but work pretty quickly so I’d think we should see some previews soon. Brian W KPAE
November 3, 201510 yr Author Funny you should mention this in the same post with Taxi2Gate because they’re actually working on LFPG. EDDM is next from them and LFPG after that. They’ve been quiet for several months now but work pretty quickly so I’d think we should see some previews soon. Wow, that's really great news and something to look forward to and especially so after all good stuff that has been said in here regarding Taxi2Gates products!
November 3, 201510 yr Unfortunately I uninstalled v2.5 recently and only use v3 now, so I can't check that, sorry. I will check in v3. Tested: no runway light at night under v3 (LFBO) Roland MSFS my local airport release: LFOR Chartres-Metropole MSFS Plugins RAAS (registered FSUIPC7 required) MSFS FX for Objects & Landmark in France (Steam and smoke) and Aerial coverage for French nuclear sites
November 3, 201510 yr Something different; head east to Russia... :smile: ..... great place to fly airliners to with the sim set to Winter, on these chilly nights; MDesign Moscow Domodedovo Drziewiecki Design Moscow Sheremetyevo Digital Design St. Petersburg RF Scenery Building Kaliningrad JustSim Nizhny Novgorod (just released and really excellent) Aerosoft Yekaterinburg (Siberia rather than Europe!) Aerosoft Norilsk (Siberia rather than Europe!) As far as I recall, all have native P3Dv2 installers. All available from Simmarket and most other vendors too. Bill 😎FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro9800X3D • RTX 3080 • 64GB DDR5-6000NPPL licence holder in the UK
November 3, 201510 yr Author Yeah, maybe it would be a bit of fun heading east for a change And I've seen Vatsim ATC are quite active in this region so that's great! Which of these sceneries look best looking at the image quality or are they all equally good?
November 3, 201510 yr Yeah, maybe it would be a bit of fun heading east for a change And I've seen Vatsim ATC are quite active in this region so that's great! Which of these sceneries look best looking at the image quality or are they all equally good? They are all rather good. I prefer MDesign Domodedovo to Drzwiecki Design Sheremetyevo, as I find the visuals comparable but the former is smoother on the system for me. The new Nizhny Novgorod airport I listed above is really amazing - as well as good visuals for the airport, there's a lot of custom coverage for the whole town - power stations, the pylons going over the bridge, etc. It's fantastic value. Nizhny is only a couple of hundred miles east of Moscow, so great for a short domestic flight in the NGX. The Kaliningrad (a Russian city seperated from the Rest of Russia in an enclave between Poland and Lithuania; so very much in Europe) addon is the cheapest and I suppose it shows a little; but it's still pretty good. The Aerosoft Russian airports are a little older, but still really good. The ice textures on the buildings at Norilsk (which can regularly see -40C in Winter), if you load it in hard winter are nothing short of spectacular. You'll want to put your jacket on! As you can probably tell, I find this area fascinating as I previously knew so little about it. I've been researching these destinations, as I fly into them. Bill 😎FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro9800X3D • RTX 3080 • 64GB DDR5-6000NPPL licence holder in the UK
November 3, 201510 yr Author Ok, cool (pun intended :wink:) and I'll definitely put some of these on my list!
November 6, 201510 yr Is there a guide how to install Aerosoft Mega Airport Munich (or any other airports which are "not compatible") into v3?
November 6, 201510 yr Word of warning no Aerosoft airport scenery has yet been tested on V3 so i wouldn't install anything and just wait till its been verified compatible. Vernon Howells
November 6, 201510 yr Word of warning no Aerosoft airport scenery has yet been tested on V3 so i wouldn't install anything and just wait till its been verified compatible. That is NOT hat you have been told in the Aerosoft forum. It is not correct and needs to be commented upon There is a list of currently compatible sceneries What you were told only a few hours ago is (and I quote the reply in full) As long as they are not meant to be compatible with P3D there is no specific download. All p3Dv3 compatibel addons are listed here: http://forum.aerosoft.com/index.php?/p3dv3/ Until then you can try to use something like a migration tool (e.g. EMT), but no guarantee and support given. As soon as an addons is compatibel, a new installer is available in your shop account or in the support database (Updates) for users not buying directly from Aerosoft. 0 That is a very overt and unequivocal statement - so you are wrong when you state as you do above, so you should apologise for your error. This topic cannot accommodate such inexactitude.
November 6, 201510 yr Just talk'n here but you know what would be the most invaluable forum AVSIM could have here? A Compatibility Forum. That way all of these threads can be combined there and make it much easier for new and veteran members to go there and check out lists that come directly from the developer, in fact, get all the developers on board to contribute, considering this is one of the most popular flight sim sites on the net. -Jim Engage, research, inform and make your posts count! -Jim Morvay Origin EON-17SLX - Under the hood: Intel Core i7 7700K at 4.2GHz (Base) 4.6GHz (overclock), nVidia GeForce GTX-1080 Pascal w/8gb vram, 32gb (2x16) Crucial 2400mhz RAM, 3840 x 2160 17.3" IPS w/G-SYNC, Samsung 950 EVO 256GB PCIe m.2 SSD (Primary), Samsung 850 EVO 500gb M.2 (Sim Drive), MS Windows 10 Professional 64-Bit
November 6, 201510 yr Haha i think you should apologise read this - http://forum.aerosoft.com/index.php?/topic/99778-p3d-v3-compatibility/ Vernon Howells
Create an account or sign in to comment