February 14, 20188 yr Commercial Member Ezdok Camera v2 is now compatible with P3D 4.2. The latest version 2.6.0.29 is here: http://www.simforums.com/forums/ezdok-for-p3d-v4-2-here_topic59674.html Nick Bebyakin / Handmade cameraset - Ezdok v2 and Ezdok v3 EZdok Software. Support remains on the http://www.ezdok-camera.com/ [email protected] / 20Gb / RTX 2060-OC-6Gb / Win10x64 / MSFS2020
February 14, 20188 yr Author Sweet - thanks for the info everyone. Show stopper for me is FSL A320. Good to hear SODE works after a reinstall. For those VR pilots out there, Flyinside appears to have been updated too. So far I have most things dialed in pretty well in 4.1. So i'll give it a week or two to marinate. Chris DeGroat XP11 | MSFS i9 12900k | 32GB DDR5 RAM | 2TB Samsung EVO SSD (1TB x 2 in RAID 0) | MSI RTX 3090 | Reverb G2 | RealSimGear TBM900 Panel with Yoko+ TQ6+ & TM TPR Pedals
February 14, 20188 yr As far as SODE is concerned, you just need to re-register your P3Dv4. That is if you kept your original P3Dv4.1 folder because you wanted to keep your ORBX files and aircrafts etc.... Pierre I9 14900K 5.5 64gb ram 6800 RTX5090 Asus Strix Gaming E
February 14, 20188 yr EZDOK has just been updated for p3d v4.2. Will test today. I hope SODE works in v4.2. I have too many airports that rely on SODE. MSFS
February 14, 20188 yr ChasePlane wasn't working for me after the update (incompatible message). Anyone have any info about that? Brian Laird Too tall to fly for real, so I sim instead i7 6700K | EVGA GTX1070 (8GB VRAM) | 16 GB DDR4 RAM | Asus Z170-A MoBo | HTC Vive | Saitek x52 Pro, Multi-panel and instrument panels Prepar3d v4 | Have but don't fly: FSX, FSW, XP11, FS2 (retired now that P3DV4 is out)
February 14, 20188 yr 13 hours ago, Tokitaumelie said: Sorry, SODE works after a reinstall of SODE. That's a relief. Thanks for the correction. Cheers Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
February 14, 20188 yr 15 hours ago, Tokitaumelie said: SODE v1.5.3 does not appear to be working. Still haven't figured out what that does Michael Lagow Madness Software
February 14, 20188 yr 4 hours ago, AAN1718A said: Still haven't figured out what that does Hi Michael Basic info here : https://sode.12bpilot.ch/?page_id=2 and here : http://www.simflight.com/2015/07/28/fsx-scenery-designer-sode-it/ Hope this clarifies Kind regards
February 14, 20188 yr Milviz Phantom caused a CTD for me (they only claim to support to 4.1 currently anyway).
February 16, 20188 yr Anyone know if coatl needs an update.. or FSDT airports (rerun the one setup?).. Asus Strix z790-e; 1000 watt evga SuperNova Plat; 14900k AC_LL 0.55 adp -0.050 253/253/355 CEPoff (CB-1pass 39200 80c, msfs peak 92,avg 60-78c, astrorender 95c,room76F); 64GB(dual 32) cl32 6400 at 6400 xmpII F5-6400J3239G32GX2-TZ5RK, Asus Ryuo III 360mm; Thermaltake v51 Case; Gigabyte 4090 OC; VR-Crystal; Dofreality H6; Astrosite
February 16, 20188 yr I have three remaining concerns.... Any one know the v4.2 compatibility status of Chaseplane, SpadNext and Pliot2ATC (PATC)? Thanks, Lloyd
Archived
This topic is now archived and is closed to further replies.