March 12, 20197 yr Hello everyone! I had completed my first tour of the US, flying from KLGB, to eventually KJFK in my little PA24-250 Comanche. I love that airplane, but I want to branch out a bit. Now, because the AVSIM community always gives the best advice, I come here to ask a few things primarily about aircraft. BTW here is the route I took for those who are "interested:" http://prntscr.com/mwndp4 First a few guidelines: 1: Aircraft may be either twin or single prop. 2: Aircraft may be either in a tricycle or tail-dragger configuration. 3: Aircraft shouldn't be too slow. I love flying, but this is a simulator so I don't have all day, ya know? 4: Aircraft must have the ability to land and take off from relatively short runways. I.E. Good takeoff performance. 5: It would also be a plus (not required at all) if it was faster than a Beech 35, so I can beat my friend when we fly 😉 . 6: The airplane must be made for P3D V4. I don't want to hassle with any converters, unless the airplane has been proven to be %100 the same and working after converted. 7. I require the fidelity of the airplane to be very high. I will be spending a lot of time with it, so I would prefer there not to be anything the community deems overly unrealistic, or broken. 8. Please provide links. Thanks! PS: IF you know any good business jets, put them in here too thanks ❤️
March 12, 20197 yr 5 minutes ago, Quackarov said: Hello everyone! I had completed my first tour of the US, flying from KLGB, to eventually KJFK in my little PA24-250 Comanche. I love that airplane, but I want to branch out a bit. Now, because the AVSIM community always gives the best advice, I come here to ask a few things primarily about aircraft. BTW here is the route I took for those who are "interested:" http://prntscr.com/mwndp4 First a few guidelines: 1: Aircraft may be either twin or single prop. 2: Aircraft may be either in a tricycle or tail-dragger configuration. 3: Aircraft shouldn't be too slow. I love flying, but this is a simulator so I don't have all day, ya know? 4: Aircraft must have the ability to land and take off from relatively short runways. I.E. Good takeoff performance. 5: It would also be a plus (not required at all) if it was faster than a Beech 35, so I can beat my friend when we fly 😉 . 6: The airplane must be made for P3D V4. I don't want to hassle with any converters, unless the airplane has been proven to be %100 the same and working after converted. 7. I require the fidelity of the airplane to be very high. I will be spending a lot of time with it, so I would prefer there not to be anything the community deems overly unrealistic, or broken. 8. Please provide links. Thanks! PS: IF you know any good business jets, put them in here too thanks ❤️ A2A Bonanza or Milviz C310 Matt Wilson
March 12, 20197 yr I’d go forvFlysimware MU2 Marquise. Can land at 90 knots on 1600 ft strip if needed. Not too mention fast cruise as well. 290 kts Best, David
March 13, 20197 yr Author Both very good suggestions. Feel free to add any more if y'all have any ideas. I would like to collect as much info as possible 🙂
March 13, 20197 yr Vertx DA62 looks amazing.... although I am concerned about the very old navdata. If it could be updated then I would strongly consider getting it. The JustFlight PA-28R Arrow III with the GTN750 (1803 airac with latest update) is quickly growing on me. Dan Edited March 13, 20197 yr by dpergau added model Dan Pergau - PPL-SEL | I7-10700k, RTX4070, 32gb-3200mhz | Dell U3415W | Saitek Pro Pedals, Saitek Throttle Quadrants, Various WINCTRL peripherals, and Logitech 3D Extreme | MSFS 2020 |
March 13, 20197 yr Carenado PC-12 with the community mods Greg Edited March 13, 20197 yr by lownslo Added mods
March 14, 20197 yr A2A mustang, if you are up for a challenge! Just taking off safely is an interesting prospect 👍 AMD Ryzen 5900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 14-14-15-14-28-42 AMD Red Devil Radeon 6900XT 2700/2112 1125mv - 3 x Iiyama G-Master GB2888UHSU 4k @ 11560x2160 Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/
March 14, 20197 yr Author 3 minutes ago, djbully said: A2A mustang, if you are up for a challenge! Just taking off safely is an interesting prospect 👍 IKR? I have tried to do it before and it feels like I have to be going well over 100 KTS just to not flip over from the engines rotation.
March 14, 20197 yr Sorry don’t know ikr? But yes it’s a challenging aircraft, sure is fast though once you are up and running 😉 AMD Ryzen 5900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 14-14-15-14-28-42 AMD Red Devil Radeon 6900XT 2700/2112 1125mv - 3 x Iiyama G-Master GB2888UHSU 4k @ 11560x2160 Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/
March 14, 20197 yr Author Oh, IKR is "I know, right?" Just a little thing haha. Yeah I've heard it can fly SUPER far if you fly high and lean enough. 4 minutes ago, djbully said: Sorry don’t know ikr? But yes it’s a challenging aircraft, sure is fast though once you are up and running 😉
March 14, 20197 yr +1 for the Mustang, I did a tour of Australia in a Mustang a while ago. It added a bit of a challenge, is fast with a good range and just enough AP functions. Johan Pienaar
Archived
This topic is now archived and is closed to further replies.