May 17, 20197 yr So am I reading it correctly that unlimited + VSync with refresh rate set at 30 via hardware or an external limiter like RTSS still works as before--e.g. without 100% CPU utilization--in 4.5.12.30293 (HF1)? Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 17, 20197 yr 7 hours ago, pmb said: I only do understand a small percentage of the tech speak, however, isn't that equivalent to the age-old trick to open Task Manager, deactivate core 0 (or any other one) of Prepar3d, quit, open it again and reenable core 0. Which Lockheed Martin's Beau Hollis decidely adviced against as it would destroy the intended Prepar3d task handling? Kind regards, Michael Strangely enough you don't even have do the activate/deactivate procedure. Just open the TM set affinity widow then do nothing except click the Ok button to close it. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
May 17, 20197 yr 4 minutes ago, w6kd said: So am I reading it correctly that unlimited + VSync with refresh rate set at 30 via hardware or an external limiter like RTSS still works as before--e.g. without 100% CPU utilization--in 4.5.12.30293 (HF1)? I just completed a full, clean install. I run unlimited, RTSS @ 1/2 refresh (60), HT on with no affinity assigned, yet. Core 1 is at 98-100% stock.
May 17, 20197 yr 2 hours ago, w6kd said: So am I reading it correctly that unlimited + VSync with refresh rate set at 30 via hardware or an external limiter like RTSS still works as before--e.g. without 100% CPU utilization--in 4.5.12.30293 (HF1)? IF you turn Vsync on, yes... About 60% load on main P3D core.. With Vsync off, I get 90+%.. not 100%.. there is a difference.. Edited May 17, 20197 yr by Bert Pieke Bert
May 17, 20197 yr 53 minutes ago, newtie said: I just completed a full, clean install. I run unlimited, RTSS @ 1/2 refresh (60), HT on with no affinity assigned, yet. Core 1 is at 98-100% stock. Are you getting stutters? Rhett 7800X3D ♣ 96 GB G.Skill Flare ♣ Gigabyte 4090 ♣ Crucial P5 Plus 2TB
May 17, 20197 yr 1 hour ago, w6kd said: So am I reading it correctly that unlimited + VSync with refresh rate set at 30 via hardware or an external limiter like RTSS still works as before--e.g. without 100% CPU utilization--in 4.5.12.30293 (HF1)? In the config you spec'd above VSync On or Off makes no difference for me... I always see 95%-100% Core0 usage. So, I leave VSync Off. Sim is smooth for me with the occasional 1-2 second pause (almost always when I'm approaching an add-on airport). Greg
May 17, 20197 yr OK thought i would share my findings and what i see. Gsync on enabled both windowed and full screen In game Vsync off and FPS capped on 33 And at this point i hate tweaking the CFG but i thought i would give Affinity MAsk a try and dialed in 62 This what i got with those settings, see pic. I'm running a 8700k at 4.7. If some remember that i had REAL bad issues with running P3D at anything lower than 60 FPS when i was reading most people were getting (I hated these words) buttery smooth. But now after 4.5 hotfix with what i have done has given me that. Not going to use those words i still hate them 🙂 But again this is just me other users mileage may vary. No joysticks were broken during this test and post. Mike Intel 12700k No over clocking 32GB G-Skill 3600 Ram MSI RTX3080
May 17, 20197 yr Author 1 hour ago, Bert Pieke said: IF you turn Vsync on, yes... With Vsync off, I get 90+%.. not 100%.. there is a difference.. Did you upgraded from 4.4 to 4.5 to 4.5 HF ( cliënt alone or more ) ? Or is this a fresh newest 4.5 install. I asked 4 fellow cockpit flyers to test and they all are getting 100% load with Locked framerate at 10 fps + all sliders left and they all only updated the Cliënt ... With 4.4 I had no issue as I have tested with Locked at 20 with high settings and only had a main core load 50-73% then... ( tried that as David had a very smooth Sim with that ) Edited May 17, 20197 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
May 17, 20197 yr 3 minutes ago, GSalden said: Did you upgraded from 4.4 to 4.5 to 4.5 HF ( cliënt alone or more ) ? Or is this a fresh newest 4.5 install. I asked 4 fellow cockpit flyers to test and they all are getting 100% load with Locked framerate at 10 fps + all sliders left and they all only updated the Cliënt ... I upgraded from V4.4. Client only. Did you try with Vsync on? That changes everything on my system when I try it.. Bert
May 17, 20197 yr Author 1 hour ago, Bert Pieke said: I upgraded from V4.4. Client only. Did you try with Vsync on? That changes everything on my system when I try it.. Vsync only : 67% load Vsync + Locked = 100% load Locked alone = 100% load The question now is why you are getting a normal load when using Locked and the others incl myself we are seeing a 100% load on the main core ....? Edited May 17, 20197 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
May 17, 20197 yr 42 minutes ago, GSalden said: Vsync only : 67% load Vsync + Locked = 100% load Locked alone = 100% load The question now is why you are getting a normal load when using Locked and the others incl myself we are seeing a 100% load on the main core ....? Not sure... we must have some different setting somewhere.. "Vsync only" does that mean FPS set to Unlimited? What fps do you get then? Locking at 30.. does that change CPU load to 90+? Do you actually get 100% (flat line) or 90+% (wavy line)? BTW.."a normal load" for me is 90+... Edited May 17, 20197 yr by Bert Pieke Bert
May 17, 20197 yr Author 49 minutes ago, Bert Pieke said: Not sure... we must have some different setting somewhere.. "Vsync only" does that mean FPS set to Unlimited? What fps do you get then? Locking at 30.. does that change CPU load to 90+? Do you actually get 100% (flat line) or 90+% (wavy line)? BTW.."a normal load" for me is 90+... Vsync only = Unlimited only Unlimited , Vsync off at FT Amsterdam + True Earth NL + high settings = 85+ fps and 90+% load on the main thread core Uimited , Vsync On ( 30 hertz ) , same settings = 67-70% load on the main thread core Setting the Lock slider to anything lower than Unlimited results in 100% load.. —— But even you should get a much lower main core load when Locking the framerate to 10 and all sliders to the left .... Edited May 17, 20197 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
May 17, 20197 yr Just finished first test flight on 4.5 HotFix I don't see any difference from 4.4. Edited May 17, 20197 yr by tooting
May 17, 20197 yr 4 hours ago, Riah069 said: OK thought i would share my findings and what i see. Gsync on enabled both windowed and full screen In game Vsync off and FPS capped on 33 And at this point i hate tweaking the CFG but i thought i would give Affinity MAsk a try and dialed in 62 This what i got with those settings, see pic. I'm running a 8700k at 4.7. If some remember that i had REAL bad issues with running P3D at anything lower than 60 FPS when i was reading most people were getting (I hated these words) buttery smooth. But now after 4.5 hotfix with what i have done has given me that. Not going to use those words i still hate them 🙂 But again this is just me other users mileage may vary. No joysticks were broken during this test and post. Thanks for this. I also have a 8700k. I'm trying your settings now. You might be onto something here. I'm seeing roughly the same results. With a fresh installation of 4.5 hotfix. I was one of the unlucky ones with issues without hotfix Edited May 17, 20197 yr by tooting
May 17, 20197 yr I forgot to update. But i did see some insane blurries. Be interested in your findings. 🙂 Mike Intel 12700k No over clocking 32GB G-Skill 3600 Ram MSI RTX3080
Archived
This topic is now archived and is closed to further replies.