Jump to content
Sign in to follow this  
fluffyflops

747 V5 is out

Recommended Posts

Is it just me or do the wing physics look pretty much like they did in the previous version.  I was expecting more of a fluid motion (much like the 737NGXu) which looks realistic.    I haven't flown through any chop yet, but the wing physics on the ground look much the same as the did before.

Share this post


Link to post

Wanted to add a few things to my original post. I am recreating the test flight from last night, just with the current weather. There were 2 things I forgot to mention in my post, and I noticed them during my initial setup. 

1. The CDU blacks out for a sec every time I select anything.

2. Flight plans imported to the CDU from simbrief (I dont know about others), does not show the actual route. It will load the departure and arrival cities, and nothing more. 

Currently boarding for the retest. Will post if anything changes. But so far the FPS are the exact same as last night, even though today it is partly cloudy.

Also, anyone figure out the RAAS issue yet? Didn't see much on their forum, for recent posts, so was hesitant to post there.

-Tony@PVD


Tony Moore

Share this post


Link to post
Just now, breakinghbts said:

1. The CDU blacks out for a sec every time I select anything.

2. Flight plans imported to the CDU from simbrief (I dont know about others), does not show the actual route. It will load the departure and arrival cities, and nothing more.

Have not had those issues.  Doing a full first flight today.

Are you directing your flightplan from Simbrief to the correct V5 folder 

Share this post


Link to post

I have the Cdu issue also, the flight only loads if you choose it as company route 

Share this post


Link to post
8 minutes ago, ErichB said:

Have not had those issues.  Doing a full first flight today.

Are you directing your flightplan from Simbrief to the correct V5 folder 

Yes. The CDU sees the flight plan, but will not load the actual plan, just the dep and arr airports.

3 minutes ago, rob0203 said:

I have the Cdu issue also, the flight only loads if you choose it as company route 

I've never done that before. Assuming this 2nd test flight goes well, I will try to figure it out. Thanks for the tip.

-Tony@PVD


Tony Moore

Share this post


Link to post
3 minutes ago, breakinghbts said:

Yes. The CDU sees the flight plan, but will not load the actual plan, just the dep and arr airports.

I've never done that before. Assuming this 2nd test flight goes well, I will try to figure it out. Thanks for the tip.

-Tony@PVD

Under co route just type the route in this format LPPTEIDW, that worked for me. Could also not load via route select key

Share this post


Link to post
4 hours ago, Christopher Low said:

If it had taken me 10 seconds, I would not have bothered posting anything. The fact remains that it took multiple attempts for the system to recognise that I was providing a password in the format required, and then I had to retrieve yet another email to obtain an access code. Yes, maybe I overreacted a bit, but this is not the first time that the PMDG site has requested a change of password from me for no apparent reason.

Having said that, I love PMDG products, so I can live with it :smile:

Really surprised at this problem Christopher as I was able to access my account no problems at all as I have done for Updates done sans OC2. The only slight hiccup I had was the Order Numbers did not tally with my records, but RSR came through with them, so no probs at all in the end.

Share this post


Link to post

The ground steering, above 10kts is almost non-existent. Even a real-world 747 pilot chimed in on their forums and said its not realistic at all. 


Eric 

 

 

Share this post


Link to post

My experience with this new update is worse than the v4 ported to v5. I'm having crashes just for loading into an airport with heavy rain (KERNELBASE.dll crash). I also got a crash just for changing the view from external to internal (g2d.dll). I've also noticed that activesky wasn't loaded in one flight, so I restarted activesky, and when the rain poured in it CTD'd again not long after Activesky had updated the weather.

Might be just me, but these crashes don't occur on the 777 so I will probably have to skip on the 747 for a while until maybe I find a solution to this.

Edited by arwasairl

Aaron Kim

MOS 8502 @ 2Mhz, 512 KB 1750 Ram Expansion Unit, VIC-II E (40 columns mode), SID 6581 3-voice sound chip. 

그래요!! 

Share this post


Link to post
7 hours ago, B777ER said:

The ground steering, above 10kts is almost non-existent. Even a real-world 747 pilot chimed in on their forums and said its not realistic at all. 

There is an adjustment for “steering sensitivity” in one of the PMDG Options menus. I use a tiller axis, and found that the default setting was at “low”, which gave no ability to make sharp turns. Setting it to “high” solved the problem.

Edited by JRBarrett

Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
2 minutes ago, JRBarrett said:

There is an adjustment for “steering sensitivity” in one of the PMDG Options menus. I use a tiller axis, and found that the default setting was at “low”, which gave no ability to make sharp turns. Setting it to “high” solved the problem.

Where exactly be this setting, please brother?


spacer.png


 

Share this post


Link to post
16 minutes ago, Boomer said:

Where exactly be this setting, please brother?

FMC > PMDG Options > Simulation 

Page 11 on the very top "STEERING SENSITIVTY" 

  • Like 1

Aaron Kim

MOS 8502 @ 2Mhz, 512 KB 1750 Ram Expansion Unit, VIC-II E (40 columns mode), SID 6581 3-voice sound chip. 

그래요!! 

Share this post


Link to post
31 minutes ago, Boomer said:

Where exactly be this setting, please brother?

First press the MENU key on the CDU, then select PMDG SETUP -> OPTIONS -> SIMULATION, then press NEXT PAGE on the CDU to step to page 11/11

  • Like 1

Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post

So, I guess that they have implemented the new "steering code" in this update? I sincerely hope that this does not make a mess of everything, because the steering is perfectly fine in my currently installed version of the 747.

Edited by Christopher Low

Christopher Low

UK2000 Beta Tester

FSBetaTesters3.png

Share this post


Link to post

CTD again.  dxgi

 

still cant get this buggy rubbish to play.  Im going back to 4.5 not this junk 


 
 
 
 
14ppkc-6.png
  913456

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...