July 11, 20205 yr 39 minutes ago, regis9 said: I think that’s a core p3d issue, i noticed the same thing with a Maddog repaint I had done recently on some of the flap surfaces. Hopefully will be fixed in 5.1 It's a bit confusing though because even in V5, you can find NGXu repaints that don't have this issue (iniBuild's UAL 737-700 pack comes to mind). Maybe it has something to do with whether a paint uses matte metal or a polished surface.
July 11, 20205 yr How LM screwed it up is beyond me. In my opinion. P3d's version of pbr is the worst I have seen in any price of software. FAA: ATP-ME, 737 CA, enough time in the 757/767 to be dangerous 🤠 Matt Kubanda, 7950X3D, 64GB RAM, RTX 5090@4k, MSFS 2024
July 21, 20205 yr On 7/10/2020 at 5:43 PM, Nyxx said: Agree am not going back to v4.5, v5 and EA with the performance is the way to go. Not installed the 747 yet. Hi, I don't know if this are old news for you, but I found that reinstalling setup p3dv5 for repair I recreated the shaders folder and got our lovely ngxu metals as it should be. I keept away of envshade for now. I founded that this issue was related to other aircrafts and I read some post related in avsim about repairing p3dv5 installation. Hope that helps pd. As I had p3d addons folder as a simbolyc link I lost all of my addons.xml till I make a new symbolic link an put it on documents folder. cheers Richard Edited July 21, 20205 yr by Gumerson
July 21, 20205 yr Hi Richard, Is this a work around? I only ever have had v5 after HF2 and not added any shader program at all. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 21, 20205 yr Commercial Member I also put the envshade aside. Couldn't make any improvements. In jurisprudence, there is a principle - you look for the person who benefits.
July 21, 20205 yr 2 hours ago, BMW969 said: I also put the envshade aside. Couldn't make any improvements. same. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
July 21, 20205 yr Guys guys....just read the announcements made on PMDG forums. The blue reflection thingie is well known by PMDG and LM. It's related to a wrong material or something. LM said it will be fixed for 5.1 so PMDG had the choice to hold back the aircraft or release it with the graphical issue. I prefer the second choice... Gerald K. - Germany AMD 7800x3D / ASUS ROG X670E-Gaming / ASUS Strix RTX 3090 OC / 64 Gb RAM GSKILL. "Flightstick" = X56 HOTAS RGB Logitech
July 21, 20205 yr Yes PMDG said it would not be right and switchers also have blue lines in the VC. Its in my hanger to its fixed, MadDog and FSL have no PBR troubles shame PMDG could not work it out but need a fix. Not that its needs to be in my hanger, but its also summer here so sim flying is limited so I will focus on BAV with the small amount of time I give flight sim'ing in these summer months. Edited July 21, 20205 yr by Nyxx David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 21, 20205 yr 1. You’d have to be brave to try a shader mod with the brand new beta EA setting. Basically, don’t do this. 2. The “blue shadow” thing may be real, but it’s subtle enough that i’ve never noticed it in my sim. No need to catastrophise about this and give up on the NGXu. It’s still a great plane, one of the best in the sim. Oz Sim Rig: MSI RTX3090 Suprim, an old, partly-melted Intel 9900K @ 5GHz+, Honeycomb Alpha, Thrustmaster TPR Rudder, Warthog HOTAS, Reverb G2, Prosim 737 cockpit. Currently flying: MSFS: PMDG 737-700, Fenix A320, Leonardo MD-82, MIlviz C310, Flysimware C414AW, DC Concorde, Carenado C337. Prepar3d v5: PMDG 737/747/777. "There are three simple rules for making a smooth landing. Unfortunately, no one knows what they are."
July 21, 20205 yr 49 minutes ago, Nyxx said: Yes PMDG said it would not be right and switchers also have blue lines in the VC. Its in my hanger to its fixed, MadDog and FSL have no PBR troubles shame PMDG could not work it out but need a fix. Well that didn’t last long. I have no idea why you would spend (many) hundreds of dollars on addon aircraft, only to proudly leave them abandoned in the hangar (as per your sig). Well, it’s your money I guess. Oz Sim Rig: MSI RTX3090 Suprim, an old, partly-melted Intel 9900K @ 5GHz+, Honeycomb Alpha, Thrustmaster TPR Rudder, Warthog HOTAS, Reverb G2, Prosim 737 cockpit. Currently flying: MSFS: PMDG 737-700, Fenix A320, Leonardo MD-82, MIlviz C310, Flysimware C414AW, DC Concorde, Carenado C337. Prepar3d v5: PMDG 737/747/777. "There are three simple rules for making a smooth landing. Unfortunately, no one knows what they are."
Archived
This topic is now archived and is closed to further replies.