July 31, 20214 yr I have just had a reply from a member of Github. My problem with the unresponsive control knobs has been resolved. To operate them, to enter/leave managed mode it is the side buttons on the mouse. I have not completed a full flight yet but I have hopes.
July 31, 20214 yr Can I add my problem too. My airbus throttle quadrant indents are slightly misaligned. I have seen a suggesting editing the ini. File in the work folder. My ini file is not letting me edit it. Can you please advise which editor to use . Many thanks
July 31, 20214 yr 31 minutes ago, rwy12 said: Can I add my problem too. My airbus throttle quadrant indents are slightly misaligned. I have seen a suggesting editing the ini. File in the work folder. My ini file is not letting me edit it. Can you please advise which editor to use . Many thanks Can't you just calibrate them within the FlyPad? For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
July 31, 20214 yr I had random ctd's with the FBW 320. Sometimes I could load it at 5 different airports, then it crashed again. Until I did this https://docs.flybywiresim.com/start/installation/#clean-install-steps I didnt even know there were other related files then the ones in the community folder. I9-14900K, Gigabyte B760 Aorus Elite AX, RTX 4080, 32 ram.1 tb nvme M.2 SSD, MSFS 2020 on 2 tb nvme m.2 SSD
July 31, 20214 yr I did as you suggested however if I have the fbw 320 developer version in my comm folder it will not load the flight. The status bar goes 1/2 way and just stops. I just did a complete fresh reinstall of the fbw version and it just does not load Don System Intel core I9-10900.Asus prime Z490P motherboard, Corsair 32gb ddr4 dram, Samsung 970 EVO 1TB SSD and 1 TB Seagate Barracuda HD. Zotac GE force RTX 2080 Super 750 Watt power supply, Windows 10 Pro, Honeycomb yoke and Bravo,Thrustmaster pedals
July 31, 20214 yr 1 minute ago, gore54 said: I have the fbw 320 All fine here with latest dev version downloaded some 10min ago, just loaded fine at updated FSDT KEYW Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
July 31, 20214 yr My FBW A32NX works flawless. Installed the Dev version. Make sure to delete all liveries and also under simobjects the fbw folder before installation. Delete all the stuff mentioned on the clean install guide. Turn on Legacy mode for the Input. And you’re good to go in 95% of the cases. Edited July 31, 20214 yr by swiesma
July 31, 20214 yr where do I find the simobjects folder? System Intel core I9-10900.Asus prime Z490P motherboard, Corsair 32gb ddr4 dram, Samsung 970 EVO 1TB SSD and 1 TB Seagate Barracuda HD. Zotac GE force RTX 2080 Super 750 Watt power supply, Windows 10 Pro, Honeycomb yoke and Bravo,Thrustmaster pedals
July 31, 20214 yr Im not quite sure if it was named simobjects tbh. It’s not in the community folder but in the other one parallel to community. I am not on my pc so I can’t look it up atm.
July 31, 20214 yr Hi Don. Try to start fbw a32nx JP from another airport to check if it is an airport problem. I had the same problem in FlyTampa Copenhagen Keld Edited July 31, 20214 yr by KMSAS
July 31, 20214 yr 1 hour ago, DAD said: All fine here with latest dev version downloaded some 10min ago, just loaded fine at updated FSDT KEYW Not working too well for me. First up mouse is unresponsive over some of the knobs, for example the screen brightness knobs on the left side. Also, the Flypad is mostly unresponsive, can’t click through the menu’s. And of course, I have yet to get Navigraph charts working on Flypad. They say it works but it does not. At least tonight’s flight seems to have the weather behaving normally, no ISA+85 outside at FL360. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
July 31, 20214 yr Thanks All for your help it seems those pesky fdr files in the work folder was causing all my problems with the fbw 320. All is working now with no issues using the legacy mode. Im a happy camper once again. Don System Intel core I9-10900.Asus prime Z490P motherboard, Corsair 32gb ddr4 dram, Samsung 970 EVO 1TB SSD and 1 TB Seagate Barracuda HD. Zotac GE force RTX 2080 Super 750 Watt power supply, Windows 10 Pro, Honeycomb yoke and Bravo,Thrustmaster pedals
July 31, 20214 yr Just tested again. It is a mess. CTDs, flickering gauges, etc. I will wait until they sort it out. 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
Archived
This topic is now archived and is closed to further replies.